ECOTRIC 1000 LBS Capacity Watercraft PWC Dolly Boat Jet Ski Stand Storage Trailer Watercraft Cart Watercraft Dolly PWC Dock Slipway Cart Adjustable Bunks W/ 4 Casters and 2 Brakes

As described. Easy to use

I build a wooden one using pretty close to what an Youtube member built (3ftDeep). I also assembled this cart. I have only a few tools for building the wooden one so had Lowe's cut the wood all but the 4x4. The reason I bring this up is that my material costs were 150 bucks and that is without casters to do this and it took 2 days to do it because I study then act (being an engineer we do that (read directions also)). The metal cart was about 1 1/2 hours with a few mistakes but if you look at the diagram it is pretty easy to assemble. I question so of the hardware provided not the quality but the redundancy of lock washers and fiber nuts, only need one.The casters on this cart are huge well up to the task of carrying 1000 pounds that is a plus. The only thing I need to do is to go get a brace or bracket to support the fact that I had to extend the bunks as this cart bunk is not wide enough without doing that. The bracket provided would be fine for a lighter load but both of my jet skis are over 900 pounds and the brace is needed to support the vertical load.Other than these minor issues the cart is a good bargain. I base that on the fact I have about 16 hours of building the jet ski cart out of wood and cost more without casters. The wood cart is much more robust but not worth the effort when this cart does the same job. I do plan to remove the existing bunks and replace them with more robust bunk hangers and pressure treated 2x4 5 ft long.

Nice quality product fast shipping. The only reason I give 4 star. it’s because it has no instructions only one piece of paper with two picture with the product already assembling can’t even see the numbers on the picture under the that is great. Product.

Works great! Recommended!

Some have complained about the instructions, they were ok, I was able to assemble with no issues.Let me first say they roll very well, and they are doing the job so far.I am concerned about the long term quality, they feel like over time they metal will fail.2nd time using the carpet is already torn. Super cheap carpet.The height is off. One would think these should be a standard height, but our Sea Doo Tailer sits lower than these bunks so we have to raise the trailer wheels by rolling over a lift to unload.When it is time to replace, I will replace with another brand that is more sturdy and the proper height.

First off, I know how bad the instructions are on these type of things, but this one went above and beyond. It came with wheels, that weren’t part of the instructions at all, nor were the parts listed to attach them. Through the help of my hardware store, and dealing with the leftover parts, I was able to put it together. I still have a bunch of parts left over the plastic plugs that go for the open ends, Are all useless because of bolts being in their way on every single one of them. Still haven’t put my watercraft on top of it yet, so don’t know how really cheap this thing is. Wish me luck, I wouldn’t buy this if I had a choice.

First and foremost this is a great product for the money. They shipped it quickly and overall im happy with the purchase. One thing I will say is, if you’re not mechanically inclined don’t bother buying this. It comes in a box with no actual instructions on how to put it together. I managed to figure it out and I had proper tools to make the job easier. You’ll probably need a 1/2” impact drill and a 17mm socket, crescent wrench, and a hammer otherwise your wrist will get tired. I posted the so-called instructions that came with the product and you can see it could be quite challenging figuring out where to start. So again, if you’re used to receiving step by step instructions, this isn’t for you. But if you are somewhat mechanically inclined assembly is not an issue.

I did not know what to expect when I opened the box. Many pieces and many bolts and nuts. This is not for someone who can't use tools. I do and I had I put it together in about 45 minutes. I was pleasantly surprised when done. I was extremely happy when I finally got my RIB (Rigid inflatable boat) on it with the help of my engine crane. My dinghy is made by Caribe and is model DL11, she is 11 LOA (length) and 5'6" beam (wide). Total weight about 600 lbs. I have on this dolly for work that she desperately needs. It holds the RIB with no problems. 2 wheels lock very secure, and I even got on the boat to do some work. Just make sure you get the balance right, and the dolly will handle a lot of weight. Very light, very tough and I am very delighted!