ELEC TOOL 2760-20 M18 Fuel Hex Hydraulic Driver, 1/4"

By far the best Milwaukee cordless tool I own. I’ve had it for six years not a glitch and it’s operation. Much quieter there’s a learning curve to use less torque with this very powerful gun. The lower RPM you pull that trigger the less torqued has that’s the key.

Gonna start with the only drawback this tool has and that's the significantly lower than standard torque - it can take awhile to get self tapping screws to grab steel. I have both a 2850 and 2853 that will grossly outperform the 2760 when driving 1/4 inch lags into steel. Once the 2760 actually grabs it will generally drive as fast as the others though. Also note that I use all 3 drivers in a fast paced professional manufacturing environment. But for everything else, aka everything lighter duty than self tapping lags into steel, this is a massively superior tool. It's exceptionally quiet and smooth and performs with a level of precision control that I've never experienced in any other driver. I use mine at work to do a lot of finishing work where overtightened screws lead to really bad days. The hammering action on the 2760 is very subtle, you feel it and it works, but it's not the same experience as with a standard metal on metal impact action. For reference my 2850 hammers so hard that it commonly jumps the bit out of the screws or breaks them off. My 2853 doesn't hammer as hard as the 2853 but will also frequently snap off screw heads. The 2760 though is just buttery smooth with no problems. I highly recommend.

I picked Milwaukee battery tools to minimize chargers and batteries. Two battery types and one charger type. The 12vdc and 18vdc batteries are very good. And the selection of tools is also very good. This driver does anything I need. Any screws to and including 8 inch lag bolts go in without effort. Works with small not/ bolt hardware as well. The torque settings and light button are easy to access. A premium battery tool I recommend it.

No sirve, repito no sirve es una porquería, quizás para usarlo en casa o electricista, pero pera madera dura, tornillos grandes o metal, es una basura, tengo un m12, y mete los tornillos en vigas de acero, como si nada, la porquería del surge de primera generación, no puede ni con la mitad de los tornillos

When you use this with hydraulics it makes the job even easier than the other torque screw gun also it’s so quiet. You will be impressed.

I like it in bought a second one

Impact is quieter than my previous Milwaukee. I've experienced the more I use is consecutively non-stop the louder it becomes. If I let it cool off a little it quiets down. My only real complaint is rpm. I wish it was faster but mabey it's this model and Milwaukee has a faster hydraulic impact that I overlooked. Still a great impact gun not a deal breaker at all.

So I do it all, from electrical, plumbing, tiling, framing, drywall, carpentry, automotive repair, you name it I do it. It's an absolute beast. I've broken more fasteners than I can count at first. It's so smooth and quiet that I had no idea. The old Milwaukee drivers kinda told you what was going on. Not this one. It's fast and quiet. Super quiet. The first time it was used we all were like was that the hammer? Didn't believe it was that quiet. It's a fantastic driver for how much it was.