Supershieldz (3 Pack) Designed for LG G6 Tempered Glass Screen Protector Anti Scratch, Bubble Free

I have had one of these on my phone for a month and a half. I got a small crack in my g6 and knew I needed something but I was hesitant to get these because my only experience with screen protectors were the old plastic peel on style that always had air bubbles. These are so much better than that.Installation: this pack includes 3 screens. Each screen comes with its own antibacterial wipe and screen cleaner so you can make your phone pristine before putting on the protector. It's a very thin sheet of glass. I'm horrible at installing these things so it took me about four attempts at lifting and resetting before I was satisfied. There were no issues with taking it off and moving it except a fleck of dust that is now forever trapped.Fit with case: I use a poetic affinity case. It's a slim line bumper case and doesn't conflict with the protector. However, I can see how there might be an issue for bigger cases that come in further on the screen.Use: I honestly can't tell the difference between the protector and the normal screen. The only time I notice it is if I swipe down and touch the small cut out for the camera and speaker at the top. There is no effect or distortion on the screen sensitivity or accuracy.Durability: I drop my phone. A lot. At least once per day. I finally got a very small chip in the protector yesterday. It's small enough that I don't feel the need to replace it with a new one just yet. The screen hasn't moved, lifted or gotten any dust or flecks under it.Final notes: the company has a policy that if you mess up installing all the first pack, they will provide free replacements until you get it right. But honestly, they are so easy to install you won't need this. I'm so happy with this purchase because I don't even remember that it's on the phone. Going to buy these as stocking stuffers for the whole family.

TLDR: Great fit, excellent value, good clarity, easy application. Also, I bought this with my own money.I have owned about 25 phones over the past 7 years or so, I typically buy used and sell used. Keeping the devices in good shape is super important for resale value. But I also like easy pocket-ability and don't like to compromise on use. A few things drive me nuts when it comes to screen protectors:- plasticy feel- poor fit- reduced visibilityThe LG G6 makes a lot of this easier by having a flat sheet of glass covering the front but some companies can manage to screw up even something this straight forward.This product managed to ship 3 quality glass protectors with prime at under $8. All the blunders above were avoided and I still have two unused protectors because the install went well on the first try.Cons: Supershieldz sounds like a condom company. But lets be honest, it is hard to talk about screen protectors without sounding like a double entendre. For example, check out my TLDR and that list of potential downsides again, I didn't even do that intentionally.TLDR: Great fit, excellent value, good clarity, easy application. Also, I bought this with my own money.- plasticy feel- poor fit- reduced visibilityJokes aside, you won't regret buying these.

I bought the screen protectors for my LG G6 phones from Amazon a couple months ago and it was such a scam with false advertised anti finger print and bad quality so I decided to purchase this Supershieldz brand after doing some more homework. The product is well packed, well made and looks impressive but when I follow the instruction logging to their website to watch how-to...and I was &@$WTF*&#. The video was completely different from this 3-ack LG G6 Tempered Glass protectors. So I was on my own and to my surprise, it took me literally less than 2 minutes to apply the screen protector flat with no bubble. HERE IS HOW: make sure the phone screen is CLEAN using the provided materials, then just peel the tape 1/3 way and align the protector straight fit with the phone screen from the bottom and SLOWLY work your way up. Gently use the credit card or the one comes with the package press down to give it some pressure to avoid bubble build up. That's it. On the 2nd application for the 2nd phone, I got a bubble...I lifted the protector and repeat the steps. Only one problem is that my case was too tight which caused the protector to lift a little at the corner but when I removed the case, it was fine again, so no fault of the protector. Other than that, it works wonderfully, no finger print and very responsive and the price is very reasonable. I would recommend this product to anyone and would buy it again.

I was never one for plastic screen protectors, but after seeing the glass one my wife put on her iphone I thought I would go for it on my new G6.Installation was easy (and I am not very good at these things) although the printed instructions in the box do not match the video instructions that the little piece of paper hidden UNDER all the screen protectors takes you to. The video's method works great for lining up the protector and I had absolutely no issues with bubbles/dust. The video mentions a microfiber cloth to clean the screen but there was not one in my package - I used the one I use for cleaning my glasses.The feel of the protector is just what I had hoped for (it's possibly even smoother feel than the original phone screen).If there is one gripe I have, it's the odd cutout at the top for the sensors, camera, and speaker. To me it is a little distracting due to the large size of the cutout and the asymmetry. Some might actually like the character (I thought it looked cooler before I actually installed it). I also don't like the little peninsula of glass in the upper left caused by the big cutout. I found that that corner tended to lift once I put a case on and I don't think it would have if the cutouts had been enclosed so that glass went all the way across the top of the phone. Actually I'm not sure there is any point in a cutout over the cameras/sensors at all - I notice the spigen protectors just have a cutout for the speaker which to me looks better.After a month I am seeing some scratches on the protector. My last phone had no protector for over 2 years and never saw scratches like this, so I guess these protectors are not quite as hard as the screens they protect. But the scratches are minimal as of yet and I still have 2 replacements if I ever need them.

Absolutely perfect fit, hard glass and you can't see it at all when it's on. Doesn't affect touchscreen at all either. Extremely easy to install thanks to the guide sticker kit, alcohol cleaning wipe and cleaning cloth. No messing around getting it perfectly lined up. I've been using these for 2 years on my G6 and have been SO thankful for them on at least 4 occasions after dropping my phone on a hard surface! I cringe, pick it up, see the crack marks and go "oh no!!! :((( - oh wait that's right...everything's fine :)" However they're pretty durable and only break after a pretty hard fall. I am on my 4th or 5th glass shield now and every time I put one on I am impressed. Worth every penny, I have bought twice and will buy again!

Truly 5 stars!I'm pretty OCD about screen protectors and cases, and this has a PERFECT fit with the Spigen Tough Armor case. It's actually the tiniest bit too big, but with due diligence, it'll fit edge to edge like a glove. It took me two attempts.On top of watching the installation guide video, and using your own tricks, if you have OCD like me, here are my tips.Tips:1. Another reviewer mentioned that you should put on the case before putting on the screen protector. You should. This ensures that the case and screen protector are perfectly aligned. However, because the screen protector is slightly larger than space the case naturally allows, you should immediately remove the case after applying the screen protector. If you don't the case will constantly make your screen protector rise up and not stick to the screen.2. If you want absolutely no dust to get underneath the screen protector there are steps you can take. There are various ways but this is what I did. First I stuck my HEPA air cleaner in the bathroom and put it on high. Then I prepped all the materials needed for installation and even a nice platform/workspace (my black matte laptop) to work on and set it up on the bathroom counter. Then I took a shower (the humidity helps remove flying dust particles from the air). After the shower, I dried myself outside of the shower because towels carry a lot of dust. Before entering the bathroom, I used my hands to dust off as much dust off my hands and arms.3. While you're cleaning your screen with alcohol and micro-fiber, etc, make sure you also clean inside and outside your case and also the back and sides of your phone. Since you are using your case as an application tool, the dust from it can easily sneak under your screen protector as you're laying it on your screen (especially on the edges). Use the holder strip stickers as well as the dust absorber sticker to remove dust from your case, phone, hands, and even both sides of your screen protector. I spent almost 10 minutes with those stickers. It's amazing how much dust is everywhere. Once the case (inside and out) and phone (back and sides as well) are virtually dustproof, set your phone inside your case. I didn't want fingerprints on the screen so I used the stickers under my thumbs to snap the phone in the case. Now rotate between your screen and screen protector to make sure there's not 1 speck of dust. When you feel confident there is no more dust, peel off the screen protector's film and set the film aside. Inspect the screen protector (even the adhesive side) for any dust. You can use the stickers to remove dust from both sides of the protector. Use the sticker on the screen again (and on the lip/sides of the case), until finally you are confident that there is no lint. Then place the screen protector and let the case guide you on how to place it. Try to center is as center as possible. You'll have to snap the corners of screen protector in since it's minutely larger than the case. Then press gently to allow the adhesive do its work on the screen. Once on, immediately remove the case.4. Both attempts I experienced light "halo-ing" (halos are when the edges of the screen protector don't fully adhere to the screen causing a "halo" effect). Sometimes it's caused by dust, sometimes weak adhesive, or whatever, but it happens. After googling and youtubing solutions, I found some that worked. The biggest payoff is just using elbow grease and thumbing those edges down and holding it for 10-30 seconds. Do this over and over for like 30 minutes to an hour, or more. Use your nails, use a micro fiber cloth to rapidly thumb a particular corner/side, etc. Another trick I used was holding a hair dryer to it for a few seconds, and then thumbing those halos away holding it down as it cools back down. They don't go away right away, but little by little it does. I did this off and on for 3-4 hours and they were finally completely gone. I think it's a combination of time, pressure, heat, etc. but eventually they were finally gone.5. (EDIT) Wait 48 hours after being complete completely adhered to the screen before putting on the case.I know that all seems like a lot of work, but my phone/case/protector looks soo damn clean and it'll stay that way. There's not the smallest gap between the screen protector and the case (except the cutout), not a single halo, lift, bubble ,etc. I did find 4 tiny specks that managed to get under the protector but I'm 97% happy with it. I'll post some pictures soon.Extra tips:There is not a good deal on a lens cover for the LG G6 which is unfortunate because it's the easiest thing to scratch on the phone, and it's pretty important to keep your lens without scratches. Through research I found 2 solutions. 1. Get a skin to cover the lens. This won't protect the actual camera part of the lens, but will protect a lot of the plate. dbrand sells the camera skin for $0.95 but shipping is $5. Still, not a bad option. 2. Get a nano liquid screen protector and apply it to the lens (and the whole back of the phone). It's not as strong as tempered glass, but that option is not currently available.

For phones that are no longer manufactured or several years old, it becomes increasingly harder to find accessories, cases, and most importantly ..screen protectors! I was pleased to find that 'Supershieldz' still had this product available. I found the quality to be as good as one should expect of any glass screen protector. Ease of installation was no harder than any other brand. The provided pack of 3 lens cleaning cloths, 3 alcohol wipes, and 3 anti-dust screen alignment stickers indicated the company's willingness to go over and above to ensure the quality of their product. Everything was packaged in a hard plastic case that protects the set during shipping so that they arrive in perfect condion at your doorstep. They arrived 1 day earlier than Amazon's estimated delivery date. Overall, I am very pleased with this purchase and would highly recommend this brand to others. My only con (which is really a personal preference) is that I think screen protectors with an actual camera cut out in the glass looks better aestheticallly rather than the semi-generic look of an entire bevel cut-out. As seen in the last photo, this type of camera cut-out leaves a slight area of the screen unprotected. Not a real issue, but it is to be noted for those who would like to know that type of information ahead of time.

I got this because Zagg doesn't make anything for the G6.The application is easy, (just like Zagg Invisible Shield) so I was hopeful. I applied it to a brand new screen, Somehow there were tiny particles already stuck to the film, resulting in tiny bubbles stuck between the protector and the screen. Okay, whatever - it comes with 3. I'll just take it off and start over after my vacation. Except that I haven't even gotten to my vacation. The screen has been on for four days. Last night it got several scratches while laying on the bed while I slept. I treat this phone exactly like I treated my last one. I had the same Zagg screen protector on that phone for two years without scratching it. I have no idea how this one got scratched so quickly.On the plus side, the phone's screen is fine. For under 3 dollars a screen, it's okay. Nothing amazing. You get what you pay for, and it does come in a three pack. I shouldn't expect anything that comes in a three pack to compare to a single 30 dollar screen protector, but it was the best I could find. If you think of these as disposable screen protectors they're great. Just don't expect them to last for the life of the phone.The screen is smooth glass, fingerprints clean off easily. I've never seen a glass protector prevent fingerprints from collecting in the first place, just make them very faint and easy to remove. That remains true with this one.

Excellent product!!!

ótima qualidade.

Merci

Fits perfectly on the device...

Didn't get the screen guard only the branding package i got.