Mount-It! Bookshelf Speaker Wall Mount, Pair of Universal Side Clamping Speaker Shelf Wall Mounting Brackets for Large or Small Speakers, 2 Full Motion Mounts, 55 Lbs Capacity, Black (MI-SB37)

These worked very well for my ELAC Debut B6.2 bookshelf speakers (16 LBs each). Easy to put together, and hang. Came with all the screws needed to mount to the wall, and to optionally screw to the speakers. The included Instructions are brief, with pictures, and adequate.Base adjusts easily to accommodate a variety of widths. the ELACs were a easy fit at 10.6" wide.With my install i choose to tilt the speakers down. this made it a requirement to screw the bases to the speaker. 5 Philips screws per speaker. I drilled tapered pilot holes.The mounts will tilt down 10 degrees. I was hoping that i could coax a little more out of them. After looking them over a bit, i decided not to carve into them choosing a lower the mounting point on the wall.Still a very good product and very affordable. .

I'm using these wall mounts to hold my Polk ES15 speakers. Assembly and mounting was easy enough. Both mounts took about 30 minutes to put together. They look good. I like the fact they can be adjusted to the correct angle for my listening preference with little effort. I decided not to screw the speakers to the mounts. I think the clamps work well. There's little risk of them falling out.

These are excellent, well made, and sturdy. Easy to install and adjust, with everything necessary included. They hold my Sony SSCS5s no problem, and allowed me to mount them 90 degrees to the wall. The base is large enough that the speakers aren't wobbly or in any danger of falling. I have some other mount-it speaker mounts and those have held up for years too.

Great product for the price. This is the second set I have ordered. Mounts are very sturdy and easy to install. Even though my speakers have curved sides these hold them very well. I knocked off one star because the plastic trim is fragile and you have to be very careful not to break it, but looks fine once installed. I wish the angle could be adjusted down a little more but that is not a problem with the product as it was accurately described. It is hard to find another mount that works this well and is this sturdy without spending quite a bit more.

I use these with my Polk Audio ES15’s. They fit perfectly and look awesome! Very easy to install too. Took me 15 mins for each shelf. I use them for rear surround.I also like how they can swivel and and tilt down or up if desired. Really great shelves. Made of heavy steel. I’d recommend for sure!

I bought these mounts for use with some small Polk bookshelf speakers. The mounts themselves are extremely well made and sturdy, I have no doubt that they'll hold the weight they claim. They were easy to mount into drywall, and came with all the necessary hardware. It took me about an hour to do the measuring and installation. The included instructions were very clear and easy to read, and the actual mounts themselves are simple to put together. You might want to have another person around to help you, it's handy to have someone else hold the mounts in place while you insert the screws into the wall (but if you're careful you could do it alone).You don't have to screw into your speakers, the mounts themselves have nice padding on the speaker bracket, so they hold speakers in place well. They do give you a bit of angle and side to side adjustment which is nice. I do wish they could angle down a little more (I have mine pretty high up on the wall, it would be nice if I could point them down a bit more). But Mount-It's advertising and product info was accurate so I can't blame them for that.Overall for the money these are great. Very sturdy and I do recommend them if you are looking for simple, clean looking wall mounts that give you some adjustment as to where your speakers are pointed.

I am very happy with these mounts. I would absolutely buy them again. My front speakers weigh 29 lbs each, and they are not going ANYWHERE! They look fantastic, solid build, the swivel system is easy to position, and the clamps on the side do a great job keeping my speakers in place. The clamps are padded so there is no worry of scratches. I used some 5/16 x 2 inch lag bolts to screw these bad boys into my studs and used the provided anchors where needed to keep them from vibrating.There are only 2 negatives that are not really a big deal. 1) I would not recommend someone only using the provided screws to mount these, it will probably work but would make me uncomfortable. Do yourself a favor and buy 4 of the lag bolts I mentioned earlier and get at least 2 on a stud for each mount. 2) The plastic cover on the back is not exactly heavy duty, just be gentle with it as one of mine cracked while we were installing them. Just be careful with them and DO NOT put the plastic covers on before you screw the base onto the wall. I know it sounds silly but if you put the plastic cover on before you mount the base to the wall the plastic covers will get snagged on a screw on the back.You should really consider these as they were inexpensive, easy to install, look great, and will keep your speakers safe.

I bought these mounts for use with some small Polk bookshelf speakers. The mounts themselves are very well made and sturdy, I have no doubt that they'll hold the weight they claim. They were easy to mount into drywall, and came with all the necessary hardware. It took me about an hour to do the measuring and installation. The included instructions were very clear and easy to read, and the actual mounts themselves are simple to put together.You don't have to screw into your speakers, the mounts themselves have nice padding on the speaker bracket, so they hold speakers in place well. They do give you a bit of angle and side to side adjustment which is nice. I have mine pretty high up on the wall they look nice.Overall for the money these are great. Very sturdy and I do recommend them if you are looking for simple, clean looking wall mounts that give you some adjustment as to where your speakers are pointed.