AUTOXBERT 38cm/15 Inch Hand Sewing Steering Wheel Cover Breathable Anti-Slip Leather Steering Wheel Cover for Nissan Qashqai Toyota Camry RAV4 VW Golf

great fit, not too tight on a fiat panda (04) steering wheel. did not sew through the stitching but used blunt leather needles and sewed through the holes on the edge of the cover. used two needles, thread cord and put through 2 adjacent holes from the outside in, carry on round the wheel and pull tight and tie off when you get to a spoke( an assistants finger helps, like tying a bow) sew through the holes past the spoke , outside to in on the first pair of holes and pull tight and tie off, carry on sewing like this all the way round. pull tight til the edges nearly meet and the thread makes a very good seam and excellent grip on the cover. looks great and the grip is improved no end, perfect for older cars. sewing like this is a lot harder than some covers state but the end result is more professional and less likely to go wrong. just take your time and it does work.

Perfect fit for my steering wheel as per the measurements in the product description. Plenty length of ‘yarn’ supplied to stitch all way round, and needle included as well. I stitched through the holes in the leather that the edge stitching goes through, rather than try to catch the edge stitching as the instructions seem to suggest. My old foam steering wheel was starting to wear in places and this cover makes it look better than new. The soft leather is really comfortable and doesn’t slip on the wheel or in my hands. Its for a specific sized steering wheel so make sure you measure before buying.

Nice look and easy to fit it. Took me about 30 minutes to do it but I like the final result. It doesn’t really feel like a genuine leather but will see after couple of months if is a original leather or PU leather. More than enough Thread but slightly different colour. I see some reviews saying that not enough thread but you need to connect the STITCHES tougher from both side only so one meter should be enough and do not double it for no reason as the thread is very strong. Only 4 stars as it doesn’t look genuine leather but seems to be strong anyway

Be mindful as this product is not made out of genuine leather. It has a plastic coating on the surface. The shiny part is actually made out of plastic and not leather.

Really pleased with the cover. Arrived quickly so I got on with getting it fitted. I have a Nissan NV200 which has a thin steering wheel, I thought it might be too big in this regard, but it fits very well. It takes about an hour to sew together and can be a bit fidly being black,k with black thread. But take your time and work methodically and you should get a good result.

Used this on a Ford Focus mk 2. After measuring I was fairly sure it would fit, and it did. It is supplied with two lengths of thread and two needles. I found one was enough. I watched a youtube video first and then went to work Took me 1.5 hours as each stitch only moves you forward a few millimetres. I did miss a couple of stitches but am pleased with the improvement for not a great cost.

Nice product, but NOT LEATHER!!

My wife wanted this for her car, and according to her, it was fairly simple to do, and it looks amazing. She also says the steering wheel feels so much better now.

Installed this on a 2022 Lexus RC, and the red stitching matches the car’s red interior really well. The Australian sun can be hard on steering wheels, so we wanted a sacrificial cover. The kit includes plenty of thread, and the cover fits tightly once in place. Installation is a bit time-consuming at around 1.5 hours, but the result looks clean and factory-like. Overall, we’re very happy with the finish and feel of the material. We recommend it to anyone wanting to protect their OEM wheel.

This steering wheel cover looks really good and was real easy to install. The hardest part is getting it onto the steering wheel, but stitching it together is easy, you just go through the stitching from one side to the other. It made my wheel feel a lot nicer and is good value for the money. I highly recommend this cover if you want a nice OEM looking option that fits well.

Ich bin sehr sehr zufrieden das Produkt ist fein gemacht und man kann das selber an den Lenkrad bringen. Ich empfehle jeden wenn sowas braucht zu kaufen.

This fit very well on my Hilux steering wheel. Nice and thin, so it is a good repair when your steering wheel starts to peel. Advice is when you are stitching it on. Start at the seem, so it lines up when you complete your way around the wheel. Be prepared for slow repetitive sewing to get it on and to make sure to keep your stitching tight. If you do, it is a nice feeling cover and none of the stitching pulled through the fabric.

Paßgenau Mensch sollte Handnäherfahrung haben,wenn es schön werden soll. Ich habe ca 1h gebraucht und von Automenschen Lob für die optisch ansprechende Arbeit erhalten. Das ist jedoch auch dem beigelegten Werkzeug (Nadel, gewachster Faden) zu verdanken. Das Plastelenkrad fühlt sich mit dem Ledercover richtig gut an. Auch im Winter ohne Handschuhe. Und sieht gut aus. Die farbige Naht macht was her. Dieses Cover und das Einnähen war ein Geschenk. Der Empfänger freut sich darüber, wie schön sich das Lenkrad nun anfaßt. Kein Schwitzen im Sommer, kein Frieren im Winter.