Spigen OnePlus 3T Screen Protector Crystal Clear 2 Pack Clear Film for OnePlus 3T / OnePlus 3

If you have a OnePlus 3 or 3T and you've been looking for a screen protector, then you know just how frustrating that is and just how many bad screen protectors there are. Whether they're the plastic film type, like this one or a tempered glass screen protector.The main thing that causes said screen protectors to be bad, is that the OnePlus 3 and 3T have a curved edge screen, making it hard for screen protectors to adhere at the sides, ultimately leading to "lift off" or white/clear bars on all edges which attract dirt and grime. Also some screen protectors were having some rainbow discoloration at the center because of bad adhesion (of tempered glass screen protectors mostly).This screen protector addresses that issue and I have no lift off whatsoever; it also has no discoloration. While I miss the feel of a tempered glass screen protector, I do not miss the lift off issues I was getting with almost each one I ordered. I'll take the trade off any day.I applied the screen protector with a wet application, meaning I used warm soapy water to position the screen protector on my phone, followed by squeeging out the solution from between the screen protector and my phone's screen. I have found this method to be the best way to apply screen protectors (both film and tempered glass), as it's easy to adjust and easy to remove any debris you may get under the screen protector in the process.Pros:Adheres on all sidesNo discoloration (rainbow effect)Relatively easy to apply (not harder or easier than any other screen protector to apply)Cons:No smooth feel of tempered glassOleophobic coating (or lack thereof? It's not as bad as some, but not as good as tempered glass screen protectors)All-in-all, I'm satisfied and I'm happy I didn't have to fork over $25 to OnePlus for a single tempered glass screen protector plus shipping.

In the world of fake Amazon reviews, OnePlus screen protectors get the short end.I've tested about 7 screen protectors for my phone, and they have all fallen short except for OnePlus' OEM protectors (which are no longer for sale) and this one.Spigen has basically created an improved version of the OEM one that comes on the phone, it's edges extend further. They include all of the needed materials for installation, even ZEISS brand wipes!Basically, these are the only protectors I'd recommend due to their ease of installation, and looks. Good job Spigen, you dun' good.Edit: Literally just singing the praises of Spigen again on this one. Just installed my second protector and the install quality was just as good (And by no means am I good at installing screen protectors). Go you guys.

Be warned: applying this protector is harder than Dark Souls. It's extremely thin, almost feels like cling wrap, and the tolerances are less than a millimeter. My suggested application method: take the 4 included dust stickers and put them on all corners, and ignore the alignment stickers. It will make your life a lot easier. Trashed my first protector; second one came out pretty well. If you're not confident in your skills, I recommend buying two sets of these (for a total of 4), just in case you have really bad luck.End result: I screwed up a little and now there's a bit of airgap at the top of my screen, but it's not a big deal. Protector is very clear, display looks great. However, tilting the screen at an angle shows a bunch of marks which look like scratches or dust. Likely I scraped the protector too hard trying to remove air bubbles.tl;dr: good protector, very difficult to apply. Much better than a tempered glass protector, though.

Let's start with the good first, shipping is fast but didn't show much update on Amazon or USPS. This package comes with two glass protectors and everything you need to install on a phone. The glass protector looks and feels like the one that come with OP 3T from OnePlus. It covers the screen more then the OEM OP glass screen protector. It's also case friendly and no pop up when the case is on the phone.The bads are not many, I have difficulty time align the screen on the phone. If the screen protector is more solid then it would be easy to align. Squeeze out the bubbles also a big task as well. I also suggest read the directions before start install.This is the only screen protector that does not give any wash out look and feel like glass. I highly recommend this screen protector and brand for OnePlus owner. Just take the time to install and squeeze out bubble then you will have a good screen protector.

It was surprisingly easy to put on, and the display looks fantastic: so much better than the tempered glass I tried, in that regard (tempered glass barely touched the screen, and had a rainbow effect in the middle). This has almost the same cut as the official OnePlus screen protector that comes pre applied, but a bit more glossy and clear, I believe. The problem with the factory applied one looks like it will be problematic with this one as well, though: my Diztronic matte black case looks like it will start to pull up the edges of this product, just as it did with the factory one. The problem is the same: those dang curved edges. The screen protector needs to be either a tiny bit bigger or a tiny bit smaller in surface area so that it either covers the edges, and is held down by a case, or fits just within the edges so as not to interfere with them.Someone needs to design a case specifically for the OP3T; having the cutouts in the right place isn't enough. Even OnePlus themselves seem to overestimate the phone's ability to play nicely with cases and screen protectors, judging from the factory applied one.So I'll see how long this one lasts, and will probably be more careful about applying the second one completely straight, because any misalignment at all could ruin the edges of the screen protector, due to the curves.

Your browser does not support HTML5 video.  This Spigen Screen Protector is a truly a premium product which comes with 2 screen guards, 2 lens cleaning wipes, one microfiber cloth and a instruction manual with clear step by step process to fix screen protector on your onePlus 3 / 3T smartphone. If you follow instruction properly, you can sucessfuly fix the protector without making any bubbles on it. This screen gard is Imported and manufactured in Korea.Mrp posted is Rs 1,099. Before buying, please check the pictures and video attached with this review. I hope this review was helpful to you in anyway.

I really love my new screen protectors as they perfectly replace the OEM glass one that was offered on the manufacturer's website and that chipped really quickly. This one is made of plastic film (not glass) but fits perfectly on the screen. Il sticked to the screen really easily and if you do a mistake during installation, you also have another one in the package so you don't have to order a new one.There is no rainbow effect and no glare.I really love it and would definitely buy it again!

The screen guard is of very good quality.. Though sticking it w/o dust getting in and w/o any bubbles forming is a very tough task.. Took me a lot of time, even then small bubbles formed..

Easy enough to install and looks great at first but within a week the protector is full of cuts. My phone is always in a case which happens to be Spigen neo hybrid and in my pocket without anything else that could impact the screen. The screen protector that comes with the phone lasted much longer and still looked good when I decided to switch to this one.

One of the best screen protector for one plus 3. It covers barely to the end of screen(not noticeable if you have a spigen case) it's just normal screen guard.Easy to put yourself, with instructions.