Hornit CLUG PRO Bike Rack | Bike Wall Mount | Bike Hooks | Bike Rack Wall | Bicycle Rack | Bike Storage Rack | Cycle Rack | Bike Holder | Secured by FIDLOCK Strap | 5 Sizes | Easy To Install

Highly recommended bike mount that simple, reliable and low cost. I'm glad I bought the Pro version because the weight of my e-bike creates quite a pull on the Clug, so I like the Pro's extra security. Each size covers a wide range and I feared that would mean the fit is looser than ideal because my tyres are at the bottom of the MTB XL range. However, I needn't have worried. I did also wonder if I needed the MTB size. My tyres are 2.35" / 60mm, so I should need MTB XL but the manufacturer advises: "DOES THE STATED SIZE ON YOUR TYRE FALL BETWEEN 57-61MM (2.3-2.4”)? If your tyre indicates it is in this range then it is best to go for the CLUG mtb." I tried the MTB and MTB XL but the latter was far too small / tight. I suspect the plastic would break with time. But as Hornit says, the key thing is the tyre's actual width rather than the number printed on them. Before mounting the Clug on the wall, I checked it on my bike's tyre and thought it would be too loose. But, if storing your bike resting on its rear tyre and the front tyre raised, the key thing is to mount the Clug on the wall above the axle's centreline. That means the Clug grips the tyre rather than the rim. The instructions say to mount it 10-12.5cm above the axle while Hornit's YouTube video says 7.5cm. The latter would have been too low for me and I found 12cm worked well. I recommend having someone help when fitting the Clug and test what height works best. I suspect it varies depending on the size of tyre vs Clug. Once the height was decided, it was very easy to fit and holds the bike securely. The Pro's strap not only prevents the bike from falling backwards (if stored vertically) but also brings the Clug's sides together so it grips the tyre more tightly. That latter effect is very useful if the tyre is at the bottom of the Clug's size range.

We have had a CLUG Plus for two years for our son's bike stored in the vestibule and it has been great. He's grown since we first started using it and extending the saddle and handlebars, making the bike extend into the space just a tad more that was ideal On occasion the bike would get brushed coming in or out of the door causing it to fall. This new design is just great - no need to worry about the bike falling over, often onto us. It is now safe, secure and no longer a hazard. Brilliant! So easy to fit, simple to use and genius in design.

This is an excellent product, well thought and designed. This has allowed me to store my bike in my London room in a very stylish way. I attached this to the wall with unibond no more nails extra strong strips and so far seems to keep hold of my bike (6.9kg) However, due to the lighness of my bike I find the boa-cord totally unnecessary, I could've bought the regular version and achieve the same result.

Needed more space in my garage and got this to hang my bike up. Easy to fit to the wall and simple to store and release. Great product

This is a good solution for storing your bike vertically to reduce space. I had purchased a Bike nook before and returned this as it was expensive and wasn't the best soltuion. The design of this solution is great, I would recommend it as an alternative to a bike nook. That being said the price you pay is only for 1 CLUG PRO. I would have given this a 5 star rating but I feel the cost for this product is too high. It is a good design, but the concern I have is on durability. Its made out what feels to be flimsy plastic and I am concerned it will not last, with frequent removal and insertion of your bikes front wheel over a longer peorid of time.

Terrible quality. Mount completely snapped after 5 uses. Used with 29mm tyres.

I was originally concerned this would not provide enough (if any support) for my bike before buying this however after doing so I can say that this does the trick very well. I have my bike stored upright with the front wheel off (out of necessity) and therefore the front forks need extra support but if you are planning on buying this, storing your bike upright with both wheels on, the CLUG will work perfectly. The magnetic strap also works well, when tightened it secures around the rim (safely) and pulls the sides of the CLUG tighter around the tyre. A feature I didn't think would be very useful but seeing it in action and how well I works I must say it's very nice to have.

Fab product and easy to install. All instructions are printed large with images. Be sure to measure your tyre before you buy to make sure you get the correct size. My tire was 2.4 so I bought the XL and it fits perfectly. The magnetic strap is an added bonus. A quality product at an affordable price.

Ebike hält super. Jedoch ist der Preis für ein Plastikteil viel zu teuer....

This is the best lil device. Inexpensive and holds my bike on the wall perfectly. Such a great way to store my bike.

Sodisfattissimo, tiene bene la ruota della bici da corsa misura 700x26

Cet article convient pour ranger un vélo vertical dans un space restraint.

Als erstes ein lob für die schnelle Lieferung, bereits am nächsten Werktag. sehr schöne Verpackung mit integrierter Bohrschablone. Doch bei der bestückung des Montagematerials wurden bei meiner Glug Pro 4 Schrauben, statt 2 Schrauben und 2 Dübel 8mm ins Briefchen getan. Bei einem solchen stolzen Preis, sollte sowas nicht vorkommen, nicht jeder hat nen Baumarkt zuhause ;-) oder das wäre dann wieder eine unnötige Retoure, die man vermeiden kann. Ich hatte noch welche vorrätig, so konnte ich die Clug montieren. Die Glug Pro XXl ( 2.75-3.20 Zoll Reifen ) klemmt meiner Meinung nach bei einem 2.80 Zoll Mtb DH Reifen meines Fully E- Mtb Intense Pro MX Carbon zu schwach. Ohne das FidLOck System würde ich es nicht an der Wand hängen lassen. Könte sein, dass die Klemmkraft bei größeren Reifen z.b. 3.0 Zoll Vertrauenswürdiger erscheint. Dennoch rat ich jedem das FidLOck System zwingend anzubringen, wenn man ruhig schlafen möchte ;-)