ACM400 Flexible Gooseneck Omnidirectional Microphone for Motovlogging Moto Vlog Action Cam Helmet Mic - Clip on Microphone for Motorcycle Vloggers - Compatible with GoPro Media Mod

I've made about 100 videos using this mic in my helmet. The cable is much longer than necessary, I think 2ft would be the max needed for motovlogging. I haven't done it, but I'll probably cut it to length and put a connector on it with some heat sink to protect the cable at the strain point. The sound quality is good. For the price, the sound is excellent. I've ridden through rain storms, wind storms, heat, cold and hail with this mic. It works great. It has foam on it, but I put a dead cat over it to reduce wind noise. I bought a pack of 5 on amazon for cheap, lost one, have 3 spare still after 2 years. I also use the voice isolation in Final Cut Pro to reduce that. There's only so much you can do with a mic in a 70mph wind. That said, my voice audio is pretty good and, if I'm riding under 50mph, I can control the wind noise almost entirely. Overall, I'm very pleased with the mic and am buying a 2nd one for backup just in case. I also have a similar mic from Movo, no cable, short gooseneck. I use it with my DJI wireless Mic. I didnt' like the sound of the internal mic and I figured the sensor was the same (might not be), so that helps provide a more uniform sound between my on bike riding voice and my voice overs. I recommend you place the mic about 45 degrees off axis from your mouth. ie: 45 degrees off straight forward. That will reduce plosives and excessive sibilance. If you put it right in front, real close to your mouth on the chin bar, you'll get more wind noise and if you say picked peppers playing poker with popsicles or something like that and play it back on any kind of halfway decent sound, you'll hear the plosives bad. Sibilance can be tamed with EQ sometimes, but plosives are best fixed BEFORE you hit record.

This mic works great! Super awesome for the value. Works perfect with my GoPro Hero 12

Please refer to video for sound quality test. See photos for reference to build quality issues. ---- Microphone review ---- Overall it's a solid sounding microphone. I didn't experiment with positioning inside of the helmet. The sound is a teeny bit harsh but it's placed less than a half inch from my mouth so no blame there. I did not test at speeds above 80mph, but at 80mph the wind is nowhere near as harsh as other microphones and does not cause clipping, stuttering, popping or crackling which was the number one reason I bought this mic. So far it holds up. I'm not disappointed with the microphone. The quality for the price is fantastic. I have the pop filter it came with installed in addition to a cheap "dead cat" sound stock over top for a double layer of wind protection. Recording performed with a GoPro Hero 5 Black and GoPro audio adapter with an AGV K6 helmet. ---- Build Quality ---- Mostly terrible. It's pretty flimsy. I broke my first unit as soon as I tried handling it when installing it into my helmet. It separated at the ends causing the wires to disconnect/short. For the second unit I receive, the same problem was present. The glue used to secure these pieces is horribly weak. However, I was prepared. I used some loctite gel super glue for a thicker, sturdier finish and gently separated the pieces. I placed the glue around the edges and then pushed everything back together. So far it's held up very well. I have had no more issues. I don't believe I should have had to do it in the first place. I hesitate to give the unit 4 stars because of how weak the assembly is. At least the components themselves are sturdy and rigid. But really, just use better glue. There's no reason this shouldn't be a 5 star product. Fix the glue or modify the assembly to be a sealed set and you have the best mic I can find on the market.

Good microphone quality works well for motovlog. The value for the money was worth it. Is compatible with Go Pro 12.

This microphone worked great mounted in my full face helmet with out a face shield, it has great audio even at 60 mph, picks up just the right amount of engine noise so your videos sound very real, make sure you use the wind screen , in fact buy some spare screens to have because you will lose them.

Does not work with go pro so I saved it to use with my sim broadcasting on YouTube for my off road and sim racing- Peachstateatv- however the mic don’t pic up that great, sending back!

Works great with my GoPro 12 Black inside my helmet, if you're in doubt then don't be buy this as I've tried so many microphones, and this works great, plus the added benefit of not having an extra long cable it was really easy to tuck into the lining of the helmet. Would definitely buy again.

Excelente micrófono para motovlogging. Yo lo uso en mi GoPro Hero 10 con el Media Mod y funciona perfecto. El cuello de cisne flexible es muy práctico para ubicar el micrófono dentro del casco, y el audio se escucha claro incluso rodando. Es ligero, fácil de instalar y muy cómodo para grabar moto vlogs. Ideal si quieres mejorar el sonido sin complicarte. ¡Muy recomendado!

Bought this to be used with GoPro12 and mediamod. I get now really good sound quality from talking while driving.

Je recommande vivement ! Ce micro est une vraie pépite, on m'entend parfaitement avec lors de mes essais. Je l'utilise en er6n et c'est tout simplement génial ! On me l'a vendu comme étant l'un des meilleurs micros, et sincèrement je ne regrette pas. Pour les petits budgets, n'hésitez plus !

Che dire, in confronto alla concorrenza il costo è molto basso e per questo uno si aspetterebbe un prodotto poco prestante. Devo dire che mi ha sorpreso, lo uso per il mio canale youtube Yell-InMoto e lo faccio senza nessuna particolare protezione al momento. Il risultato secondo me è ottimo davvero. Ho fissato la parte flessibile al casco con del nastro adesivo ma a parte questo dettaglio è favoloso. Consiglio alla grande

De Movo ACM400 levert een uitstekende geluidskwaliteit, zelfs bij hoge snelheden en wind. De flexibele nek is heel handig om de microfoon precies te positioneren. Compatibel met mijn GoPro Media Mod, werkt perfect voor motorvlogs en actiecamera’s. Duurzaam en betrouwbaar – een must-have voor elke motovlogger!

It’s working pretty good! I installed it on my motorcycle helmet!