ONiLAB Lab PRP Benchtop Centrifuge 6x15mL/10mL/7mL/1.5-5ml, 300-5000rpm(Max. 2600xg RCF),LCD Digital Desktop Lab Centrifuge Timer 30sec-99min, Two Quick Start Programs

Very happy with this centrifuge from Onilab. It’s much quieter than another centrifuge I had, almost silent, and feels sturdy with a clean, sleek design. Shipping was timely and the unit arrived well packaged. Highly recommend.

I needed a centrifuge for lab orders. This was less expensive than the one that my lab rep tried to sell me, but it seems like a great deal and it works well.

Most transactions aren't that memorable. I'm going to have good memories about this one though. This was my first centrifuge. This isn't an area I have a lot of subject matter expertise in, but the experiments I'm running are simple enough that it mostly isn't a problem. The instructions were clearly written in English. I was able to set it up without trouble. The safety features to lock the cover function properly so that it only opens when it has stopped spinning. I made a mistake by not balancing my samples correctly. This causes the device to vibrate and then stop running when it can tell something is wrong. Rather than re-read the manual I foolishly booted it up multiple times, watched it vibrate and shut down. Eventually it produced an error code. I consulted the troubleshooting portion of the manual and learned I had loaded my samples incorrectly. Unfortunately the error code meant I had also misused it enough that I had broken something. I contacted the service center and explained what I did and asked for advice on how to proceed. The agent diagnosed the problem as a circuit board damaged from the vibrations. I was immediately offered replacement parts at no charge. The parts arrived in under a week despite shipping from China. I followed a video provided from customer service and was able to replace the motherboard with a common screwdriver and hex wrench. The entire repair took under 20 minutes. It's working fine now. Everything from the product to the company vastly exceeded my expectations. I was taken great care of and am successfully completing a lot of work with the device. In my opinion for what I paid I ended up getting a lot of value. I suspect you will too.

Been using for PRF preparation for a few months. 900rpmx7 mins looks like the best result with my tubes. Works great. Easy to use. No complaints. Just what I needed.

I bought this centerfuge for my mobile phlebotomy bussines and it's great. It's small, quiet, and can centerfuge different size of tubes. I had an issue with the power adapter. It broke from the back input and I contact customer service about it. The machine still works perfectly and I just needed a replacement for the adapter. They got back to me and they are replacing the power adaptor that broke! I was worry that I would have to buy a new machine. However, thanks to their great customer service I will be able to continue using the machine because it's stills works great!

I previously owned a machine made by this company and it was a great machine. When I received this machine it was in the box loose. You could tell it was bounced around. When I opened the box the centrifuge was upside down. I picked it up and started to turn it over and little round glass beads started to come out the air vents. I searched tbe entire book and internet. I could not find anything about small round glass beads being inside this centrifuge. Some of the ones coming out were crushed. Very strange.

I have had this centrifuge for almost one year and it does work for experiments. I've been using it on and off, whenever the respective experiments for cell culture or extraction are needed. However, it is important to note that the centrifugation speed seems to be rather on the lower side. I have centrifuge cells and powder extractions from samples and there always seems to be particles that have not sedimented completely at the bottom of the tube and are floating around the supernatant instead. This may be problematic for gathering sufficient samples for experiments. However, throughout the time I have used it, data has been gathered and compared to other centrifuges again. The only main problem for me is a lower yield of treated cells or extraction due to what I believe is a lower centrifugation force than expected. I have converted gravitational force to revolution per minutes using the provided cell data sheet g-force while measuring the rotor in centimeters and there still seems to be samples in the supernatant. Overall, it is a good centrifuge which may result in lower product yield and it can help you for your experiments. In relation to the power cable, I had no issue with this. I was provided a standard power cable that can be just plug in directly to the wall outlet.

It works. I have only used it a couple times. I wish there was more information on recommended speeds and settings for the procedures Im using it for, e.g., PRP, PRF…

I am extremely satisfied with this centrifuge. Despite being compatible with 6x15 ml tubes, it has a compact and stylish design. It is incredibly easy to use and operates almost silently. The use of a brushless motor enhances durability and completely eliminates maintenance costs. The seller’s customer service was outstanding as well. Even after the purchase, they were quick and attentive in addressing my additional requests. I am very happy with both the product quality and the support I received. Highly recommend!