Electric Dirt Bike Front&Rear Brake Pads for Surron LBX,2 Pcs | High friction brake pads,quiet braking,not afraid of heat,for Surron Light Bee X,for Talaria Sting MX3/R MX4,for X160/X260

Installed on the Talaria MX4. Install is easy and takes just a couple minutes. Stopping power is as good as anything and on par with the name brand I swapped out for these. Allows precise control to walk a stoppie down a hill and enough bite to lock the front and rear. The only downside is that they will heat soak and fade with a lot of hard riding and constant back to back brake applications, same as any bicycle sized brakes especially without heat spreaders. I haven't had them long enough to speak about how long they last but at this price I'm sure the value is there.

These replacements were for our SurronLightBee. The brakes are pretty easy to work on for both the front and back. Remove the screw/pin by first taking off the c-clip (very small don't loose it) and then unscrewing the allen pin. Then simply pull up on the brake pads and they should slide out. Putting in the new ones though require you to push in the cylinders to flat in order for the brake pads to slide in. Use a flat metal tool of your choice to carefully push the cylinder(s) flat. Once flat, insert the pads and replace the pin. For the rear, I found it easier to remove the brake unit (2 screws). It was just easier to handle for me. Whole thing should only take you 15-20 minutes. If it is taking longer, you are probably doing something wrong or there is some other problem to solve. Good luck!

good pads, lasted a long time, good for money, fit fine on stock surron breaks.

Nice brakes for surron light bee, they fit, they stop what more would you want

These brakes work well! This is the second pair I have installed! I put them on my talaria xxx e bike to replace the stock pads. I bought one pair of shimano cool stops and one pair of these and these outperformed the cool stops hands down(which surprised me cause I had heard great things about the cool stops). Great brakes highly recommend.

They work well but be prepared to replace often if you’re putting them in a talaria or Surron. They aren’t designed to stop that much weight but do a pretty good job. I put mine in about 2 weeks ago and ride everyday. They are starting to wear already.

Fit Talaria perfectly and grab so well. Much better than other pads I have tried. Will be buying again when these wear out.

Didn’t even last 30 days

Put these on my surron which I’ve been doing tons of wheelies and using tons of brakes and they hold up good! 10/10

Perfect replacement brake pads for my surron, easy to install.

They were fast just like the Stock 1 so there’s just that’s good as OEM

Elles ont fondu en 200 km... pure scrap

Very good braking power. It's a shame they lasted only a couple hundred km on my Surron