Brass Angle Stop Add-A-Tee Valve for TOTO Washlet Bidet and Handheld Sprayer, 3/8 Inch Compression Shut Off 3 Way Diverter Connector, 3/8"x3/8"x3/8" or 1/2" Toilet T Adapter

So I wanted to connect a sprayer to the toilet bowl, unfortunately the typical connection wasn’t possible. Most sprayers or bidets connect to the base of the toilet tank using the 7/8” toilet tank pump. My toilet at my apt is one of these where most of the tank plumbing is hidden and inaccessible because I have some “fancy toilet” I guess.After so much borrowing and multiple trips to the hardware store I had purchased several pieces needed to connect a simple sprayer. In the pic I posted with this review you can see all the other parts needed in order to connect a sprayer or bidet.In total I had spend around $50 in parts. I’m the other hand this small affordable valve I finally found on Amazon was able to achieve what I needed; to connect a sprayer and a regulator valve to the toilet plumbing.It took me less than 5 minutes to install this valve. It works perfectly and easy access to it. I can control the flow and turn it off when not in use of while not home.It is sturdy, well built, and seems durable. It also came with all the seals needed to prevent leaks.You will not find this valve at The Home Depot, Lowe’s, or Ace Hardware. I went to all those hardware stores and I wasn’t not able to find it or anything remotely similar. The only option they have is to spend lots of money and to purchase several parts and if doing so, you have much higher chances of having a leak.I definitely recommend this valve. Completely worth it!

I used this when looking the dishwasher into the sinks hot water line! Fits great, looks great and hasn’t leaked!

Replacing the original plastic one. Very happy with the results.

This does what it is supposed to do. It came in with all the pieces and have had no issues with leaking or anything inside the fitting so far. Hopefully that continues.

Great product, very easy to install

Pro tip: be sure to tighten the 1/4” side down all the way, or you’ll have a slow drip.

A few years ago I installed a bidet attachment on my toilet.It came with a plastic T adapter to connect the water supply.After a few years of use, the adapter started leaking water onto the floor.Since there was no way to shut off the water to just the bidet, I had to disconnect the water supply from the toilet water supply.I found this, which is a much better quality connector and is also a valve to shut off the water to the bidet without having to disconnect anything.It works like a champ, and I'm sure it'll hold up longer than I will.

I needed to attach a Toto washlet purchased from Costco onto my wall mounted toilet. The parts that came with it assumes the toilet has a tank. This part allows you to connect the Washlet to a standard 3/8” supply valve, you just need to shut the unused valve. It’s brilliant!! And so much less expensive than a Toto solution. Seals great!

Needed this so my Luxe Bidet 185 Neo could connect to the wall. We have stupid toilets that use 3/8 so I needed something to connect to the 1/2 that Luxe uses. No leaks. Didn’t even use plumber tape. Easy to install (recommend some pliers for final tighten twist). Good product. The switch a bit cheap feeling but who cares, I leave it in open position for my use case.

Use it to install the bidet for my one-piece toilet, the job become lots easy.

Good quality, and it has it's own shut-off for the filter or other accessory.

We got a LIVINGbasics bidet (model# LB-TL-MAX2), which was 15/16 x 15/16 x 9/16. Our toilet's supply line was 3/8, so we looked for a 3/8 x 3/8 x 9/16 T-valve. Trying to find the correct fittings or adapters was confusing to say the least, and after 3 hours I finally came across this 3/8 x 3/8 x 1/2 T-valve. All the different thread and pipe standards made it difficult to realize that the 1/2 NPT adapter would fit the bidet supply, but another listing for a 1/2 adapter said it would fit 9/16 which was another standard (I think). Since this listing said it worked with TOTO and LUXE bidets, I figured there was a high enough chance this would work.We received this next day and installed it in 5 minutes, with a solid fit to the bidet line. Bidet works great with strong pressure, no leaks so far.

work perfeclty