HDDRACK5 5-Bay IDE/SATA Hard Drive Organizing Rack

This is one of those products that you either need or dont. In my usage, I have a few internal hard drives and a modded case to allow SATA pass through outside. I doubt this thing can fit inside a computer case (it might though) but the way its designed, its a simple rack to hold 5 drives outside the case. Theres no backplane, no USB 3.0 conversion or anything, just simple walls of metal to hold drives. And it works perfect! With it, I can stick 3 external drives on here and put in a small spare PSU on the bottom and literally plug and play to my machine. The thing has anti-vibration feet and while the drive connections are somewhat solid (you connect them directly to the cage with screws and slide into a track), the plastic track keeps vibration down so its not noticeable. I barely hear the fan but you can always swap it with a noctua or something if you need be (standard 3 pin fan). For what it is, Id expect the price to be closer to the $15 dollar range, but its one of the few products that isnt overly-fancy or looks out of place on a desk (compared to those 5.25" 3.5 bay enclosures) so Im not complaining on price. Buy it if you need it, and trust that itll work.... long term usage, I have no idea on reliability, but since like 99.9% of the components that could fail are what I supply, Im not too concerned.

I moved my home server, as part of an OS upgrade, from a Frankenserver case to a new HP proliant m110 G7 with 4 internal drive slots. I had 7 drves in my existing server case, that used an internal cage to held 3 additional internal drives. The internal cage would not fit inside the new HP case. (I could have bored a single hole in base of that case and mounted just as this one is to the exterior of the HP case.) This cage has foam pads under its base. It firmly attaches to the top of the HP case with a single screw through the center of the cage's base plate. Once mounted, it is stable and firmly in place. The drive mounting screws slide into cage rails and are held in place by a mechanical locking pin. The cage came with a standard plug for attaching an auxillary computer power supply. I decided to remove that in favor of running a power cord from the HP's power unit within the case. I also bought a 1M SAS to 4 SATA cable to connect 4 drives within the case to my RAID card. I used the cage's 5th drive slot for a SATA drive, that is connected to a motherboard SATA port, for C: drive backups. I also added a 120mm fan screen to keep things out of the fan. All in all, this unit fit my needs to a "T." I might add side panels to dress it up some when time permits.

I have a home brew Linux file server, and I needed somewhere better to fit my 5-drive setup (2x WD Green 1.0TB RAID-1 + 2x Seagate 1.5TB RAID-1 + 500GB system/boot drive). This rack did the job just fine. The setup was easy enough - simply screw in four thumbscrews per drive, then slide it into the rack's bay. The plastic snap was a bit tight for my WD drives, but my Seagate drives snapped in just fine. After being fully assembled, the whole enclosure feels pretty solid (no shaking drives, etc.). I opted to use a 200W power supply from a leftover case to owed these drives externally. The fan works decently, although it's definitely not the the quietest fan; however, it's just in a closet anyways, and the drives themselves combined are much louder than the cooling fan, so it's not that bad. My only complaint is that I wish the rack had some way to mount the power supply, so it's easier to organize and move around. A power supply just dangling around is neither the safest nor most aesthetic thing... But again, in a server closet, it's not that big of a problem. For the price, I probably couldn't ask for more, so I'd recommend this to anyone looking to expand their storage solution.

I bought this to increase my Server's HDD physical capacity to 9 (5 in the bay, 4 in the PC). Here's what you need to get this working. 1. An additional Power Supply, make sure it has the correct size for the "motherboard" connector and has enough SATA connections, if it doesn't, you can get molex to sata cables (like this one Connectland CL-CAB40021 Molex to SATA Power Cable). 2. 5 extra SATA data cables that are long enough to go from the HDDs to your motherboard or sata controller card. What I did was placed all the HDDs in the rack. Grabbed a power supply from a computer that I didn't need and plugged the MB connector to the rack itself (next to the on/off switch) and plugged it in with a standard 3 prong 120v power cord (make sure rack switch is set to off). Plugged in power to each HDD with the same power supply. Ran SATA data cables to the back of each HDD. Cracked open my computer and ran those Sata data cables through an empty PCI slot (removed the blank). Making sure to protect the cables from getting sliced by the sharp metal (you can use duct tape for extra shielding). Connected the SATA data cables to my SATA controller card and/or Motherboard. Closed the computer. Flipped the rack switch to on and turned on the computer. It worked amazingly. The rack holds the drives, the fan is quiet, the extra power supply means a dedicated power source that isn't going to overburden your existing power supply on your pc. Is it a little messy, yes, but unless you want to buy a big tower or somehow mod out your existing computer case, this is the easiest and cheapest way to go. Also an FYI, the SATA controller that I bought for this was Monoprice 4-port SATA PCI RAID Controller Card, it works great and was very cheap. Happy as a (IT nerd) clam.

Bought this for a custom G5 mackintosh Server I built. I put this inside the case, but took the fan and ATX connector off. It does it's job. However, it is slightly annoying to have to take screws out of drives any time you want to change one, which for me is often. Would have been good to make it some sort of screwless design that you could just click a rail on each side of the drive and slide it in, like in most CoolerMaster cases. The other thing was the drive release pushpin. They are very stiff, and sometimes you have to push on the drive to get the pushpin to click in place, locking the drive in. It's also a whole other story trying to get the pin to release the drives. Build quality is mediocre, but it is made out of aluminum. They could have made it a slightly thicker gauge aluminum and not had to curl the edges over to give it stability.

This is a great drive rack. I needed extra space for the drives for my server and this worked perfectly. I am using two of these to house an additional 10 drives for my server, and they work exactly as they should. The fan is quiet and keeps air flowing over the drives. The racks have a board connector which allows you to connect a power supply directly to the rack so you can use a standard PC power supply to power the drives and fan. I have 21 drives connected to my server, with room for a few more thanks to these racks. There are 14 drives inside my case and 7 external. I cannot recommend these racks highly enough.

Repurposing an old computer case for a NAS with 5 drives, but the drive cage only held 3. So I ditched that cage and found this one. What appealed to me was the space between drives for airflow, and the holes in the sides- keeping the drives from heating up too much is the key to keeping them healthy. The drives slide in using the special screws that come with it, and they lock in with a snap. I used a few zip ties to the cage in place in the case and a little cable management makes it almost appear like it came with the case. I mounted the boot ssd on top of the cage with a little double stick tape- done. Having the choice of powering the drives with their own dedicated PSU- if you want to mount the cage outside the NAS case- is a nice option to have if your case is too small to hold it.

Recieved this product today (01/12/20). It feels very sturdy, well made. It came with instruction, and a little bag of screws. However I believe the unit I received is faulty, this power will turn on for a second, and cut right off. Tested the power supply on different items to ensure validity. Hopefully can return or get a replacement, I was very excited for this product. Again, if the unit didnt have power issues, it would be 5 stars hands down. But be weary, everyone's experience is different right?