CORSAIR 7000D Airflow Full-Tower ATX PC Case – High-Airflow Front Panel – Spacious Interior – Easy Cable Management – 3X 140mm AirGuide Fans with PWM Repeater Included – White

Definitely a five star case! - Solid! This thing has heft! Even with the inner cover-of-cabling-shame removed, this thing is solid. - Room! This thing has so much room. You can put in all the radiators or all the fans or a little bit of both. - Reliable! I think that given the room and the heft it could probably be used as an impromptu bomb shelter a la Indiana Jones refrigerator style. This has been my favorite case ever to build in. It's just ... easy. Cables are truly manageable. The hinged sides are great. The ability to customize is beautiful. You can add so many drives or remove the bays entirely. Tons of options for cooling. Lots of room for airflow. I've been using it for a few weeks now and things stay cool. I will be adding more fans in to keep it even cooler but I'm waiting for replacements for the three 120mm that arrived as a single used hair tie instead of fans. So you can enjoy the bit of crazy RGB that is has for now in the photo. Any complaints I have are too minor to mention, in my opinion. While nothing may be perfect, this is close as it gets. I have it paired up with Corsair cooling, hosting and ASUS mainboard and GPU, and G.Skill RAM. When I get the rest of the fans and the second lighting controller installed, will add pics (if Amazon lets me edit like that?) As it is, it's going great and I can't wait to add those finishing touches and report back on changes in cooling and coolness. Honestly, this case *ahem* probably won't change your life in a three wolf moon shirt kind of way, but it may be your next true love. The only reason my wife isn't jealous is because I got her the 5000D. She now games with a smile and a glint in her eye that belies true joy and she might love her computer more than me. It's OK. I did this to myself.

I have experience with both the 5000D and this case, 7000D. I have built similar systems with both. The 5000D would be my minimum case size to balance airflow and space. For my personal build, I need more room for expansion and I like to just have alot of space. This is a HEAVY case with very minimal places where you can get a good grip. The case itself alone is probably 50lbs. Then fully loaded you're pushing 75lbs. It's very sturdy and built like a tank. The side panels are thick. I believe the glass is 1mm thicker than that of the 5000D (in which there been cases of where 5000D glass sides are shattering). Everything in the 7000D is similar to the 5000D but just bigger and roomier. I have an Intel 13900KF + RTX 4090 (beast card) with plenty of room to spare. I added a couple of extra fans to keep the rig as cool as possible. I'm running air cooled with Noctua DH-15S. You can easily fit Corsair's largest AIO coolers. I had considered this but didn't want to deal with leaks and other issues. If you wanted to, you can load this up with 10-11 case fans. There's that much space. I like the magnetic dust screens. There's not a whole lot of plastic pieces, which is why it's so heavy. Plenty of space for the RTX 4090. Cable management in the back is ok. There's primarily one main channel that's used and it's already housing alot of just the case cables. If you start adding the PSU cables, you'll find the channel gets thick such that the inner door won't shut. It does have other channels that you can use but because the case is so big, unless your cables are custom and extra long, you'll end up routing via shortest distance. Cable management on the front side is ok. There are shrouds in place but I had to remove one because it caused too much bend in the motherboard cable if used. The grommet holes are ok. Would like to see some larger grommet holes at the top and bottom. Accessories are kinda bare minimum and comes in a cardboard box. Not like some other case vendors where you get a nice plastic case. Not a big deal. Lots of space for external drives (which is one reason why I got it) - (2-4) SSDs + (6) 3.5HDD cages. The cages are metal but drive brackets are plastic with no rubber vibration dampeners. So there will be noise. I like how there's plenty of USB3.0 A and C front panel connectors. Minimal lighting (got the non-RGB one). But the big selling feature is the amount of airflow you can get through this case. Because of the larger fans and airflow, the case is super quiet for me and my idle temps are pretty low. Overall, I like the case. Is it the best? I think there are better (Be Quiet! Dark Base 901 or Cooler Master Cosmos) but they were also more expensive. I didn't want to spend too much on a case and this was already pushing it. For the balance of build, features, and price it worked for me. Lastly, the internals have some nice configurability options that should suit anyone's needs for extra fans or more minimalist look or expansion of room. Anyone thinking about getting the Corsair SHIFT series PSUs, there's plenty of space for the side mounted cabling. For rear mounted PSUs, there's room if you remove one of the 3.5" HDD drive cages. If you plan to vertically mount GPU (I didn't), I believe there is enough room between the glass side panel and the GPU for decent airflow. It's much more space than the 5000D. I wouldn't even consider vertically mounting GPU in the 5000D. The 7000D will work though. This case did come with an anti-sag mount for the GPU which is nice. It's came pretty stingy with only 3 fans - 2 front and 1 back. But I guess most people get their own fans. I just added two 140mm to get 3 fans in front, 1 on top, and 1 in back. I may add more fans on the top if there's a need. I did not bother adding fans to the side panel - you can literally go crazy with too many fans. The bottom feet on the case are kinda stubby and low. My case is on low pile carpet, so there isn't alot of space for PSU to get good airflow. But I think my PSU fan runs in quiet mode. I do wish case manufacturers think about this. You can probably put this case on the table BUT it's BIG.. may over power your desk setup. Because it's so heavy, it will be challenging to move around. I have thought of getting a wheeled platform to put the case on because of this. This could be an issue so you may want to consider something lighter or smaller.

This case is a GEM. I have built a few computers so far in my life, and I think this was the easiest case to build in yet. Though it is a Full-Tower case, so with all the real-estate, it better be easy! The case is Big, it weighs in at a whopping 49 Lbs. empty. However, with my whole build it easily tips the scale at 85-90 lbs. The pictures do not do this case justice, it is BIG, and has a large footprint. Standing at around 2.5 Feet tall, almost 2.5 feet long, and 10 inches wide, you need to make sure you have the space for this case! The chassis is made of thick gauge steel, and feels and looks durable. The metal panels are also thick, and quite hefty, requiring two hands to comfortably handle and maneuver. However the panels are easy to remove on both the sides, front, and top. The removable racks for fans is a very nice touch that made installing the Rad, and fans a breeze. I only used one tray for my LTS 3.5" HDD and the rest of my storage is done through NVMe SSD's. however if you plan on using all 6 trays you will have to be meticulous in cable management because it doesn't leave much room for extra cables let alone using 2.5" SATA drives, so I recommend getting a modular PSU for this case. If you fill your fan slots with corsair fans (I had 12 in total) the cable management bay is a tad bit on the cramped side for the size of the case, but it is workable if you have enough time and patience. I will list my build below to show what I have living comfortably in this tech mansion. The amount of cutouts for the cable routing is very nice in such a large case, there are a couple things I wish I'd done differently. If you like the RGB features like I do, I recommend spending the extra money on Corsair Link systems. It alone would cut the amount of cable routing by nearly 75% and you wont wind up with a rats nest of cables. The commander series of fans have short cables and required some ingenuity to route them to reach the Commander Core and Commander Core XT Modules for all the effects. (mine are still not in order and I spent the greater part of 8 hours on cable routing and management and I'm not 100% happy with where I wound up). However, I'm willing to admit that I went haywire with the RGB fans and went for the less expensive Non-LINK fans so it is mostly my fault. If corsair Were to supply or Offer a kit of a few extension cables for your front fans for the RGB and PWM cables this would work out just fine and It would have saved me a few hours of Cable Routing, however I am not attempting to say this is their fault by any means. Their cable management system provides 2 channels to route cables with Velcro straps to fasten the cables to the chassis. These Channels are small, however, and tend to give troubles for high end power hungry motherboards as their custom cables have the capacitors that eat precious room in these channels. Other than the options for cable management, this is a very nice looking, functional case that is built very well and seems to carry the expected Corsair quality. I 100% recommend this case if you are in the Market for a sleek Modern case to house your large components and give plenty of airflow to keep your expensive parts cool. My Build affectionately named Nightingale: - Corsair 7000D Airflow Black - ASUS ROG Crosshair X670E Hero - AMD Ryzen 9 7900x (AM5) - Corsair Dominator Titanium DDR5 32Gb x 2 - Sapphire Nitro+ AMD Radeon RX 7900 XTX Vapor-X - Corsair RM1000e Modular PSU w/ Corsair Pro Type 4 custom sleeved cable kit - Corsair H170i Elite XT LCD 420mm RGB Liquid CPU Cooler (Top Exhst) - 8 x CORSAIR iCUE SP120 RGB ELITE (4 x on the front panel & 4 x on the side panel) - 1 x CORSAIR iCUE SP140 RGB ELITE (rear Exhst) - Micron 3400 512 GB M.2 NVMe SSD - Crucial T700 2TB Gen5 NVMe M.2 SSD

I (probably like many others) agonized over the decision on which case to get. It was between the 7000D, 5000D, and the Phankteks Enthoo Pro 2. I ordered a 5000D, and while it is a great case, it is IMO a little cramped for a EATX setup, and likely even a regular ATX and/or Mini/Micro ATX (agian IMO). While the 5000D is a decent sized case, the basement area is pretty cramped when you are trying to shove a bunch of cables, a power supply, and hard drives down there. I ended up returning it and getting the 7000D (considered the Phanteks, but decided on the 7000D for a few reasons (more room in basement, and I wanted to top mount my 420mm AIO). Pros: - There is SO MUCH MORE USABLE SPACE in this case for being just slightly bigger than the 5000D. Plenty of clearance for rad/fans on top, I could probably do a push/pull without interference with memory. - There is space for six 3.5" HDDs and UP TO six 2.5” HDDs and/or SSDs which is great!! If you wanted to you could probably shove those six 3.5" HDDS, as well as six 2.5 HDDs or SSDs in this case (would need three additional 2.5" brackets, that's a lot of storage!! - Lots of room for cable management, not only down below, but on the backside of the motherboard tray as well. I did end up not putting on the interior door (it just gets in my way lol), the cable routing on the "front" side of this area does not block the mounting screws for the side fan bracket (something I really disliked about the 5000D). - Has 140mm rear fan, this was a huge plus for me as well, when your pushing 8x fans of air into the front and side of the case, you want to be able to get that air out, so having the rear 140mm in combination with the 420mm AIO on top set to exhaust makes for pretty decent airflow. - Top mount up to 420mm radiator on top and 480mm on front (though I don’t use the latter, and not 100% sure you could do both at the same time, but you can do 2x 420mm) means BIG cooling potential. Also the top radiator mount is removable via two thumb screws, such a nice feature!! - Four USB 3.0 ports on front panel as well as one USB 3.1 Type C, its always nice to have extra accessible USB ports. Just make sure your motherboard can support them (need two USB 3.0 headers, which most EATX boards have). - The cable pass through is all one opening. On the 5000D it is two openings and the grommets inside them do not stay in place well. While the grommet still has a bit of issue (comes out of place, but easier to re-install than on 5000D) on the 7000D, it is a lot easier to work with one opening instead of two. - Hinged (removable) door panels. I did not think I would like this at first, that was until I got the case and started building in it. Having the ability to remove them is great when you are doing the initial build. The ability to just swing them open after it is built helps to have quick(er than thumbscrews) access to things when needed such as motherboard switchs, jumpers, etc - There is room (once fan hub/stand offs are removed makes it better) to mount at least two Corsair Commander fan/LED controllers on the back side of the motherboard tray. Neutral/Good to know info: - Area under top panel will not allow install of 120mm fans on top of the frame like on the 5000D. This might seem like it should be a negative. However, there is plenty of room inside the case for fans, and like I mentioned earlier, you could probably put a push/pull setup above the motherboard with no issues inside the case. - Window on PSU area is cool, I didn't really need it, but it is cool it is there. - The included fans are pretty decent, though I did not use them, I am sure they would do a good job of cooling. - The area for routing the cables is pretty tight near the hard drive bays, it is manageable with both installed, but would be a lot easier with the most rearward one removed. - The glass is tinted darker on the black case, it is clear on the white case. This did not matter to me, in fact I prefer the tint as it knocks down the harshness on exposed LED Strips - The location of the rear exhaust fan on the back side of the case (using a 140mm) makes it difficult to install LED strips in that location. It is doable (I loosened the fan and put them behind it), but I do wish there was little more space there… of course this could be overcome by using a 120mm fan, but who wants to do that. - While there is space for three 140mm fans on the front, I believe it is more optimal (and looks better) to have 4x 120mm fans there as you have more airflow (dependent on fan type of course) but it also takes up the whole space (three 140mm leaves some space), which means when running LEDs it looks better. - I saw someone mention you have to remove the air deflector to have 120mm fans on the side of the case, which I found to not be required, so you can use the air deflector and 120mm fans together, reducing turbulence and directing more air toward the motherboard din the process. - The air deflector is two pieces, I had to remove the smaller (closest to motherboard) piece in order to have room for my EATX connections to fit. I tried doing a stand-off mod to it, but then my GPU was in the way, so I left it off. - The fan hub is a splitter, it will not allow for individual control of fan speeds - The vertical GPU mount is to close to the side panel (especially for 3+ slot GPUs), it does include a bracket to move it back farther though, so there is that. Negatives: - The area for routing cables from the front into the rear area is very small with sharp edges. - They really should have put grommets on all the cable pass throughs, for a case of this caliber to not have those is kind of sad. Though I found some edge trim ASIN: B00M8MAOLI that worked great for making my own. - No lights on the front I/O, I am almost certain Corsair omitted this to sway people towards the 1000D (which is way to big for practical purposes), it would have been great to have some light (did not even have to be RGB) around them, to assist when inserting in the dark. I may try to come up with a solution myself, or throw a USB book light in one port for now at least. - Mic/Headphone I/O not separate, come on, there was room for it, the jacks are pennies on the dollar, and all that had to be done is make another hole (less plastic) - Not a fan of the securing method for the door “latches” mostly because I have had a case where the “ball” has came loose. It works good, and is convenient, but it would be good to have the option to install a more secure method to keep the doors closed more permanently if needed. -

This is a case built for serious builders who value both cooling and cable management. The high-airflow front panel and fans keep temperatures under control even with demanding hardware, while the spacious interior makes installation straightforward for large GPUs and custom cooling setups. Cable routing is one of its strongest points—the dedicated channels and PWM repeater make it easy to keep builds clean and efficient. The build quality feels solid, with a premium finish that matches the price point. It’s not the smallest footprint, but that’s the trade-off for flexibility and airflow. Overall, this case delivers on its promise: excellent thermals, room to grow, and a design that makes building less of a hassle. A reliable choice for anyone planning a high-performance system.

I absolutely love this case! Coming from the Asus Hyperion gr701 and this case just crushes it for airflow. I would give it 5 stars buttt ( yea I know it’s older ) I had to do some modifications especially for the power cable for the gpu so it had a better run to the gpu. Also I installed 3 140mm fans on the side and the bracket only supports 120mm so had to do a little drilling. Still absolutely beast of a case and I love the size.

it has a very robust material and a lot of space inside with tons of different options that i didnt get to discover them all yet after a week it has an insane amount of airflow and at the same time you cant hear anything that comes from the PC ive installed 14 noctua fans and the case is around 60cm away from me and i cant hear anything from it I compared this to my older case (H500P mesh) the difference on noise and temps is too much on my opinion theres few advices that id like corsair to add or change into this case: add a bit more of room for a 4th 120mm fan at the top of the case, the front and side panel can have 4 but not the top and this could make it "match" the whole case (this may make the case overall length bigger so i understand they didnt made it for 4 120mm fans) add a support for the GPU on normal mount (im not sure if its needed for riser mounting) add a screw for the PSU and motherboard door,sometimes the cables need to be pressed a bit to fit and with a magnetic door that isnt possible, this is solved by just taking it off and using the side panel to close it but then this door loses its purpose this case still has more potential to become even better than it is right now and i hope corsair doesnt forget the full-tower designs because this one is GREAT note: you can connect the fan hub that comes with this case as long as the fans you want to install doesnt go over 12w without using the sata connector, if you do you must connect the sata connector (check how much power each of your fans requires and add them all) this is a rule in general for all fan connectors except for some premium motherboards that allow more w in one or two connectors but the rest will still support only 12w note2: if you want to install a 6 fans radiator on the front you have to change the direction of the rails or whatever it is called for it to fit, i didnt try this for the top mount but it should be the same note3: i couldnt find a good position for the SSD's on the HDD's storage without bothering the fan at the bottom located at the side door, i think it was just me not doing a good cable management to fix it and i wasnt expecting it to happen so to anyone that wants to mount a 4th fan for the HDDs/SSDs be careful on the way you set the cables the only "bad" thing in this case is its weight, way too heavy but thats because of the good quality of the case, best way is to take off the side doors and then it will be a bit lighter to carry then put them back after if they make a better version of this it will be on my wish list for sure

One thing right off the bat, this case is massive and heavy. It's all steel and has a multitude of options in configuration. Routing cables is easily done. You can change the overall setup to just about any way you want. There are many places for Disks, both traditional HD and SSDs. I ended up removing much of the inside partition materials due to the massive RTX 4080 graphics card. This case has an integrated fan system that only requires 1 feed from the motherboard, but I removed it and ran all the fans separately to the motherboard. I got more control over each fan that way. Just a personal preference. The case has features that support water cooling. There isn't a connection to indicate HDs like some cases do. The case is very easy to configure for just about any contingency. IT has a very pleasing look and one of the doors is smoked glass to see what's inside in case you support LED color stuff. In general, this is an outstanding case, but should be considered by advanced builders.

Very well made case, bit over kill in places like double back door, plenty of room to put stuff, i got 420 Radiator CPU cooler and a 240 GPU cooler, 16 fans in total all runn fine, keeps the noise down because of solid materials, heavy at 18kg without anything in it, so be prepared to heavy lift (25KG) when fully built.

Ok to start with this is the best case i have ever had, also the biggest by far but it gets the job done, so there is a couple of things to know about this case, firstly is that the side fan mount only supports 4x 120mm and not 140mm fans. More than sufficient, also when i first used this case it did sound like a jet engine roaring, this was due to the built in fan splitter and my bios settings. The built in fan splitter must be powered by a sata power cable (same as the ssd to power supply cable), the issue turned out to be that the header i used for the fan was set to DC and not PCM, this meant it was firing all fans at max speed instead of a controlled curve. This one change in my bios made all the difference. Cable management has a lot of room and mounts for the fans come off completely for easy fitting of fans, just make sure when you mount the fans they are in the correct orientation and the cables are in the correct position to allow tidy cable management. You get some complimentary screws and tie wraps plus velcro cable tidies which is great, i never used a manual to figure out how to set up the case for my build as it was self explanatory and things are built in a way to make your life easier. I suggest you pick a place with a lot of space for your build as these doors open on hinges and i needed half a room to have both doors of the case open at the same time, i also found that my power supply cables were not long enough to reach things like my cpu and even my 24 pin so i did have to buy a cable extension kit to get around this. Also although i had lots of room for cable management i still found myself fighting with cables, this was due to cable extension connections being at the back, also the fact i am using a lot of fans. I moved the rear stock fan to the front so the front has 3 140mm stock fans, the rear has a noctua 140mm fan, the top has 3 noctua 140mm fans and the side has 4 120mm fans so you can imagine i am running a lot of cables. (case only comes with the non rgb 3 stock fans, the rest i bought separately) Although i needed to buy a PCU extension kit, change a bios setting, fight with cable management i will say this case is definitely worth every penny, it is very well made, strong, everything is designed to make your life easier, it looks great, it keeps my temps low on cpu and gpu and has plenty of space for anyone wishing to run a custom water loop. I only mention my building issues as i wish i knew before i started so i didn't have to wait an extra day for cables and google the hell out of the fan splitter to find it was a bios setting so i hope someone will read this and it will help them if they need it, otherwise my advice is, DEFINITELY buy this case, it is amazing!

Mainly good but slightly over engineered. Focus could have been done with it in other areas. It can be a little form over function.

This is a HUGE case but it’s Super easy to install your parts in I got the White Edition and it’s sexy

Everything a full tower should be. Extremely happy with this tower, look up a youtube review. I didnt before purchase and was shocked at how much customization this tower offerers. Space I knew, but the amount of fans and pc storage is mind blowing. Great airflow and easy to access everything, assembling the pc, dressing the wiring and cleaning dust filters.