FoxAlien R57 Y-axis Rotary Roller Engraving Module for Cylindrical Objects Curved Surface for 4040-XE CNC Router Engraving Machine
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

FoxAlien R57 Y-axis Rotary Roller Engraving Module for Cylindrical Objects Curved Surface for 4040-XE CNC Router Engraving Machine

3.7/5
Product ID: 374428149
Secure Transaction

Details

  • Brand
    FoxAlien
  • Power Source
    DC power
  • Color
    R57
  • Included Components
    2 x Roller 1
  • Item Weight
    2.09 Kilograms

Description

  • The R57 Y-axis Rotary Roller is designed for FoxAlien 4040-XE CNC router engraving machine and other engraving machines with NEMA23 stepper motors. The rotary module is applied to engraving curved surface and cylindrical objects such as round wood, cup, cans, bottles and glass etc. The roller is fully assembled. No complicated assembly. Easy wiring. The package comes with a detailed and clear manual for using introduction and wiring. The width between rollers is adjustable to hold different size of cylindrical objects. There is a bracket with wheels which is designed to provide support to goblets such as wine glass. The angle of the holder is adjustable according to different objects.

FoxAlien R57 Y-axis Rotary Roller Engraving Module for Cylindrical Objects Curved Surface for 4040-XE CNC Router Engraving Machine

Reviews

3.7

All from verified purchases

B**R

Make sure it fits your machine

Need to change wiring as does not plug and play, make sure you make sure that it will work with your machine

F**.

Not enough information

I returned it. Got discouraged with the lack of information, things like software setting changes etc

A**R

Bad design of idler rollers

To get my unit to work without the motor stalling, I had to install bearings and shims on the idler rollers, and had to machine custom spacers to go between the bearings. 5x8 RC car bearings fit but wont work without proper spacers and shims. The pulleys on the rollers are too small (20T) - I swapped mine out with 40T pulleys and a longer belt. Without the bearings, its too sloppy when you loosen the belt enough to keep it from stalling. It would be a good value if you didn't have to spend an extra $50 to make it work.spacer: machine stock unit to length (0.463)backup washer (flat side towards shim): NAS620-C10 https://www.amazon.com/Finish-Stainless-Military-Specification-Washers/dp/B088CSGM97/ref=sr_1_14?dchild=1&keywords=nas620-c10&qid=1633908072&s=industrial&sr=1-14bearings: https://www.amazon.com/gp/product/B07SGRKBDG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1pulleys: https://www.amazon.com/gp/product/B07K6BRL4K/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1shims (0.3mm): https://www.amazon.com/gp/product/B091YBHD43/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1belt: https://www.amazon.com/gp/product/B081NKJ56L/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

E**A

Try it immediately

I purchased this roller. Out of the box looked robust and well made, but I got so busy that it took me two months to use it. Here is the problem, first, FoxAlien does not supply the extra cable to connect to the engraver. You have to use the same Y cable of the engraver to connect the roller. The problem is that FoxAlien places the Y cable through the arm of the engraver; therefore, to use the roller, you have to remove it, which was a pain (had to use a wire to put it back)Second, it took me hours of trial and error to make it work with Lightburn. The owner's manual gives you no clue how to set it up. And finally, when I finally had it connected, the motor was slipping (yes, like a bad transmission). The roller could detect the software, but the motor skipped after 2 seconds of engaging. Luckily, Amazon customer service understood my problems and refunded my money.I still believe in the brand and quality of the product. I just had bad luck with the exceptional faulty one.

M**U

Disappointed

Disappointed. I ordered an engraver and this rotary. Rotary arrived on time but my engraver was damaged. By the time I received my new engraver and hook it all up the rotary motor will not spin it only vibrates. Now because I am past the 30 day return I don't have a return option. I guess I am out $135.00.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
$295.62

Duties & taxes incl.

USAstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Foxalien R57 Y Axis Rotary Roller Engraving Module For Cylindrical | Desertcart UNITED STATES