Kingsley Tubular Cam Lock - 5/8" Cylinder, Chrome Finish, Keyed Alike, RV, Cabinet, ATM, Vending & Tool Box Lock

Excellent tubular locks. These are keyed alike, the bitting code for both locks I received is 2363573 key code 10001. These use a standard 137B key blank, so duplicate keys are easy to make. You can take the key out in either the opened or locked position. The takedown pin is not threaded, so you would have to drill it out, tap the hole, and put in a new pin to rekey the lock. The pin does appear to be brass, so the drilling process should be easy A tailpiece is included and can be installed in any of 4 directions. A rotation stop is included so the lock can only turn 1/4 turn. The 1/4 turn aligns with the holes that let you take the key out.

So I picked up a gun cabinet still in box but the box was damaged so I got it for a great deal, unfortunately the keys had fallen out of the damaged box so after I got the old lock off this one matched the size so i ordered it. It fit perfectly and worked with locking bars inside the cabinet. It was so easy to install, took only 2 minutes. The lock is so smooth when I turn the key. I’m very impressed with the lock. I would definitely order more if I ever need another one for something else

These are very good. When I ordered one set was missing parts. Emailed the company and they sent out those parts very quickly. These were very easy to install and they work GREAT. I would highly recommend

Great quality and fit perfect

Work like it should. Now the outside kitchen is locked.

Used seven of these for thermostat covers in a commercial self storage facility. Out of the seven one would not allow for key removal when the lock was in the locked position. I don't know if it was my assembly or the lock itself. It was the last one and I was tired and ready to finish. Anyway, I would prefer locks for this application to hold the key captive. Be aware that in some applications you will have to fabricate hooks from the 1 1/4" cam. The locks I replaced had the cams welded to the lock. Simple to do with an angle grinder or a Dremel. These locks are way more secure than the covers I put them on. I will purchase again if I need more locks of this type. Shipping was fast and product was received exactly as promised.

Was anticipating a very good result adding these new locks to secure the two LP & battery compartment doors on our camper. Unfortunately it didn't turn out all that well... The first obstacle I encountered was with the latching lever. It was supplied only with a flat lever, not an assortment. I realized this before I ordered it but presumed I'd be able to switch the flat one with the offset lever from my current latch, as I've done with other locks in the past. I knew I was in trouble as soon as I took the new lever off and saw that it had a non-standard mounting hole which was much smaller and not square like almost all other locks of this type. I got around this on the first lock, at least for the time-being, by sandwiching the old latch between the lock body and the new flat latch and then tightening the retaining nut enough to cause friction to hold it in place. Don't know how long it will be before it starts slipping, but I'm pretty sure it will sooner or later... .The second lock obviously had the same problem, but two others as well, one of which prevented me from using the lock at all. The first was that the lock body retaining nut on the new lock is substantially thinner than the old one. The body of the lock has flats on each side, like all camlocks, so that it will fit into not the mounting hole and not rotate. Well, with these flats, combined with a thin mounting nut and very fine threads , I found it very easy to inadvertently cross-thread the nut. Well, that's what I did and got it jammed a few threads in. I finally got the nut off and was able to get the thicker nut from my old lock started on the threads and tightened down, and so I thought I was home free. Not so though. I next installed the sandwiched lever arrangement like I had on the first lock, tightened the lever retaining nut and attempted to test its operation. Strangely, the key wouldn't go in. I thought that perhaps they had sent me locks with unmatched keys and that I'd switched them with the keys from the other lock, so I found the other set of keys in my pocket and tried them, but with the same result. The strange thing is though that I had cycled the lock before installing the levers and the key went in and operated smoothly. So I removed the nut and levers and tried the key again. It worked fine. Put them back on with luge nut only finger tight. I felt some resistance to the key turning, but at least it went in and pworked. Then ightened the nut to a reasonable tightness for that small size nut and again, the key would not go in. Disassembled once more and looked to see what might be binding and could find nothing. Their were no rotating parts in contact with the lock body externally. Something internally had to be defective. Reassembled it and tried one more time just to be certain but to no avail. Gave up and put the old latch back on having invested about an hour's time. I may try a higher quality lock that's provided with the correctly offset lever sometime, but for now I feel like I've spent enough time on what should have been a 10 minute job!

Just what I ordered.

great

Exactly what I wanted and fast shipping.

Used for a coctail arcade machine coin door. The shaft is a bit long for my use but i added a small block of wood on the inside of the cabinet to make up the difference. Seems like its fairly well made.

Shipped with no Keys?!?now i need to waste tune finding a ups location to return