Vintage Ceiling Light Industrial Rotatable Semi-Flush Mount Ceiling Light Metal Lamp Fixtures Painted Finish (with 3 Light) (Bronze)

This is an awesome light fixture. I get LOTS of compliments on it. But be warned it is a pain to install it. The wires were extremely short so my hubby had to fix that. Adding and changing bulbs is time consuming. Be sure to use long lasting LED's. I used 5000k to give off plenty of light.

It was a bugger to put up. If I had another it wouldn't take me so long. It comes with a clip connector that requires a small screw driver for eyeglass(s), that which I didn't have. What bit I could try & tighten wasn't enough to secure the wires. So I removed the clip, stripped some wire & used good old fashioned wire nuts! The plate that secures to the recess mount couldn't be screwed down bc the screws that secure the lamp were to short to accept the nuts. So I secured the plate about 1/4" below the ceiling and now the screws were long enough to accept the nuts. Yes, each wire of the cage must be placed & secured with a nut x 8. If & when a bulb needs replacing, you will have to remove & repeat the process. How often is that? It's a cool light & will compliment my other wire cage pipe vanity lamps. If this light goes on sale again, I might pick up another. Good Luck!

I have a house that was made in the 40s , and me and my bfs taste in everything differs a lot. He wanted to keep a more vintage look, to keep the house the way it was meant to, and I like a bit more modern looking stuff. This those , this style is absolutely amazing, it fits both of our tastes, and we plan to do all of our lighting in this style.

This light is very cute but very much a pain in the butt to put up because each cage has to have eight screw caps on each of the cages. And each prong on the cage is barely welded on and mine came with one of them completely detached. Probably just put that one facing the wall where it’s less noticeable… Unless I end up breaking some more off because it’s so delicate. Wish I would’ve really looked at it to see it had so many pieces and put it all together before I had my son install it but I didn’t have the lights until later so I figured, just have him get it the electrical base part of it up and I’ll do the rest when the bulbs come in. I’ll probably have him take it down and put it all together and put it back up

My daughter has become fairly obsessed with classic adventure literature-- HG Wells, Jules Verne, etc... Her current favorite book is 20,000 Leagues Under the Sea. This steampunk / Victorian-era-styled light fixture adds a special touch to her bedroom. It's easy to install but the cages that cover the actual lamps are held on by a handful of nuts and are slightly fidgety to put back on due to the flexibility of the wires that make them up.I used Ecosmart FG-03120 lamps from Home Depot; they look great in this fixture. My daughter loves it!

I like the style and adjustability of this fixture for our new kitchen. I wanted black but thought this may work, I quickly painted it because it was heavy on the bronze. Arrived quickly and installed very easy. They include some extra pieces incase you drop one or whatever. Wife and I are satisfied.

Do not buy this product. It is a typical example of cheap Chinese crap for the American market. The plastic electrical connectors failed when I tried to connect the power wires. I had to remove the wires from the connector and use caps to connect the wires to the house wiring. I purchased two units and they both came mounted crooked from the base to the lamp. I had to disassemble the lamps in order to correct the defect. It was obvious to me that no one at the factory inspected this product before it left the factory. This lamp looks real pretty in the pictures on the internet, but it is a piece of Chinese manufacturing crap.

Bought 2 of these for our family room. They look great and add a lot of light in our space. Replacing bulbs is easier than similar styles I considered. It requires removing about 10 small bolts at the end of cage. A little time consuming but not difficult. Installation was fine but I agree the mounting screws could have been longer. There was much for the bolt to grab on to, but eventually I got it. Arrived well packaged and within 2 days of ordering. Overall, very pleased with this light fixture.

Wanted something a little different as we are updating our home. Stumbled across this and placed in our front porch area. I like it, but wouldn't say I love it. It is bigger than I pictured it in the area, and it is very different than what we had there originally. Was simple to install. I ended up not using the quick connectors for the wires as there seemed to be a problem with the attached wires (and they ended up needing to be shortened a bit). Otherwise, the instructions for installation were straightforward and easy to follow. As many other people stated, each light has 8 connecting screws to attach once the light is up. It was a bit time consuming, but not overly painful. Paired with some Edison Bulbs. The light is growing on me (I'm not fully convinced it is the one, but hubby loves it).

Looks nice, its annoying to have to unscrew all 8 little caps, put the light bulb, realign everything and again re-screw the 8 caps, PER LIGHT, therefore x5. But overall looks good. did not put up yet, therefore don't know if it works yet.

Pretty decent fixture. I'm happy with it. Pro-tip - install LED bulbs in the "cages" before you install the fixture. Attaching the cage after you have installed the fixture can be frustrating and tiring (arms above head for a prolonged time).

Beautiful fixtures

Not easy to install. Very time consuming to put in the bulbs.