Question 1

Sorry, manufacturer didn't answer this question clearly.  Does the unit shut itself off when full, or will it flood my room?

Accepted Answer

If you have "pump mode" on, it might flood your room. It did for my parents. Pump mode goes off on its own, so you must have it connected to a drain 24/7. On its own because it neither drains fully, nor properly detects the water level.

What happened to my parents was they connected the hoses, turned on pump mode, but it "didn't work". So they waited a few minutes then turned off pump mode so it wouldn't start the minute they walked away. When the bucket got full, they turned on pump mode, stood there for 15+ minutes, then put the hose back. It seemed like manual operation, and after waiting 20 minutes for it to pump out, they forgot to turn it off. Then, in the middle of the night sometime, the pump turned itself on to empty and flooded the floor.

Pump mode is when it thinks the bucket is full. Not when it's necessarily actually full, and pump mode WILL NOT EVER ENGAGE unless it thinks the bucket is completely full. So if your bucket fills in 8 hours and you need to manually move it to a location to turn on the pump before bed so that it doesn't turn off in the middle of the night, you CANNOT have the pump empty the bucket because it will only turn on when 100% full. So you could end up with it turning off in the middle of the night since you can't manually engage the pump.  If you choose to manually empty the bucket so that it will run through the night--not an option for my elderly parents, but I empty mine and we have the exact same unit--often the bucket will not reset the water level, so it will turn off when it's "full" when really it only has two inches of water in it.

Make sure you disable pump mode, since the sensor and software are poorly designed and implemented, and it will not engage the pump unless it is at level 4 full or thinks its level 4 full. It will never engage when you set the max fill level below that such as 1 or 2 or 3, will never engage manually when you turn on pump mode, you cannot even manually tell it "I emptied the bucket ahead of time, reset your counter since you use software to assume/count rather than a sensor (which only detects 100% full) which pairs with the software", and if you don't remember to turn off pump mode after you wheeled 60 pounds of water+machinery to a nearby sink and waited 20-40 minutes for it to pump...well,forgetting will leave you flooded.

Midea hasn't QA-tested their products for normal use. Unless we happened to get 2 units with faulty sensors, but I doubt that. I'm 99% sure that they programmed software to assume the fill level, and a sensor only exists if the bucket water level is at the very top, basically a failsafe for the junky software some idiot approved without a manual reset option. What a joke.

Question 2

How many watts?

Accepted Answer

Hello and thank you for your question about the Midea Cube. This unit runs 230Watts. Have a great day! MideaCustomerCare@hartehanks.com (BBB A+ Accredited Business)

Question 3

How do you connect to the device to wifi? There is no cubage button, and holding the fan button for 3 seconds doesn't work

Accepted Answer

Hold the Power button for 3 seconds will place the unit in network connection mode to setup wireless control.

Question 4

Do the 50 pint, 35 pint and 20 pint models use the same amoumt of electricity?ity?

Accepted Answer

Hello, Amazon Customer. Thank you for your inquiry on the Midea Cube 20 Pint Dehumidifier. The 50, 20, and 35 pint dehumidifiers do not use the same amount of electricity. Have a nice day. mideacustomercare@hartehanks.com (BBB A+ Accredited Business)

ASIN	B08ZMY8BC8
Air Flow Capacity	150 cfm
Best Sellers Rank	#1,583 in Home & Kitchen ( See Top 100 in Home & Kitchen ) #8 in Dehumidifiers
Brand Name	Midea
Capacity	20 pints
Color	White
Customer Reviews	4.1 4.1 out of 5 stars (2,358)
Dehumidification Capacity	20 pints_per_day
Floor Area	1500 square_feet
Included Components	Air Filter, Drain Hose, Garden Hose Adapter (In the tank), Tank, User Manual
Item Dimensions D x W x H	13.5"D x 13.5"W x 13.54"H
Item Type Name	Portable Dehumidifier
Item Weight	33.3 pounds
Manufacturer	Midea
Material	Plastic
Model Name	Midea Cube Dehumidifier
Model Number	MAD20S1QWT
Number of Speeds	3
Operation Mode	Continuous
Other Special Features of the Product	Auto restart function limits disruption due to power outages by engaging your chosen settings as soon as power is restored. The auto defrost function prevents the collected water from being frozen and doing harm to the machine
Part Number	MAD20S1QWT
Recommended Uses For Product	Residential
Tank Volume	3.2 gallons
UPC	810040941528
Unit Count	1 Count
Upper Temperature Rating	96 °F
Wattage	214 watts

Cube 20 Pint Dehumidifier for Basement, 1,500 Sq. Ft, Energy star

Details

Details

Description

Specifications

Common Questions