cordless nail gun TE-CN 18 Li-Solo | PXC | 18 V | nail gun & stapler | 20 impacts/min | 32-mm nails | 22-mm staples | 300 staples/nails each | without battery

Great product. The weight of the machine is ok and done the job what I bought it for. Should have been sold with a charger and battery. But still great value for money and a lot of time saved. The look of the tool is pleasant on the eye. And easy to load with no jamming. Well done

My husband needed to put a wire netting fence up so bought this to do the job. Worked brilliantly and he only took an hour to put up an eighty foot fence. Sturdy, not too heavy and easy to use but as usual the instruction leaflet was useless! Recommended+++

Firstly, you have to remember that einhell is somewhere in between trade and DIY users so it will be naturally inferior to the top brands, HOWEVER... when you take into account the fact that you're looking at paying £400-600+ for a paslode gun then there really isn't any comparison. Yes it isn't perfect and would be better if it could take 38mm brads, but none the less I used it recently for a 11m run of featherboard fencing, I had it finished within about 2 hours! Before making the purchase I also contacted smiths tool hire who were wanting £80 something Plus vat for a weeks worth of hire. I would happily buy one of these every 6 months than buy a paslode for 4-5 times more the price! Also worth bearing in mind is that you're saving on the cost of gas and once you get used to how it reloads its plain sailing. Its also a lot quieter then the gas powered options so slightly less irratiting for neighbors. In a nut shell I would recommend it.

I thought I’d make the effort to write this review as it took me days researching nail guns for my oak lounge flooring. Ignore reports of the gun misfiring or the nails not going in fully etc etc. if you apply the right pressure at the correct angle you’ve no problems. If you push a little too hard, you’ll get a small notch mark made by the recoil of the gun. I’m currently doing up my cottage and I’ve a few of the einhell range so it made sense and I’ve been impressed by einhell bar their drill. I’m putting down 10mm OAK flooring , some boards are almost 12mm which I was sent incorrectly, and the gun has been perfect. Should I go for 16g or 18g I hear you say? I looked into this extensively and although I’d prefer 16g for piece of kind (1.2mm diameter nails/brads or staples) it just wasn’t worth the extra money. Pneumatic are cheap but I don’t have a compressor. The nails aren’t the thickest at 18g (1mm) but they are holding my boards down nicely, thus far. I put down a 6mm ply sub floor down to even out any inconsistencies in old floor boards (didn’t bother ripping these as I had the height to play with). I work to nail length being 3 x the substrate thickness your nailing so this gun provided the perfect length Brad/nail (I think Brad is a yanky term). I’ve noticed the cartridge compartment has opened itself once or twice but when the gun is empty. 3mAh battery went down one bar during a whole days use - impressive. Not the lightest but more than manageable. I wanted to throw in a few details about my job as I couldn’t find the answers on these reviews. Oh and lastly, I’m face nailing my boards because I bought straight edge boards, not T&G (tongue and grove), lots more hassle but i wanted a rustic, antiquated look. The nailers you get which you hit with a hammer are designed to be nailed through the tongue at 45o, something I don’t have. You can barely see the heads of the nails. Highly recommend this product. I’ve not tried the staples.

For the price this thing has proven invaluable in my recent DIY exploits. Perfect for my needs.

The Einhell Power X-Change Cordless Nail Gun has revolutionized my DIY projects. Its cordless design brings unparalleled convenience, allowing me to work without being tethered to outlets. The adjustable depth control ensures precision, whether I'm framing or working on more delicate tasks. The ergonomic grip and lightweight construction make extended use comfortable, reducing fatigue. The Power X-Change battery system not only provides consistent power but also offers compatibility with other Einhell tools, adding versatility to my toolkit. This nail gun has become an indispensable asset, combining efficiency, power, and ease of use for a seamless woodworking experience. Highly recommended for both professionals and DIY enthusiasts.

This is a great stapler/brad gun - really powerful and effective with a long battery life. One really good feature is that it doesn't doesn't punch the brad in the same way as the staple and therefore you don't get that unsightly 'double' dent from the stapler function like some others. It's quite heavy, but then it functions more effectively for that. Really good value for money compared to its competitors.

While the price is great and I like a lot of other Einhell tools this one is a real miss. The tool suffers from a critical issue that I suspect is present on other versions so avoid this tool. The firing mechanism protrudes from the face of the gun. This means that no matter if firing nails or staples it damages the surface of the wood. I tried it in pine and oak, at light and hard settings and it happens every single time. Now a pin nailer that damages the surface is basically useless so please avoid this product and buy a competitors. NOTE. Luckily I found this out on a test piece and not my project!

Muy muy buena y práctica. Clavas sin ningún esfuerzo y el hecho de ser a batería la hace súper eficaz y maniobrable. No es potente como una de aire comprimido pero tiene la potencia suficiente para clavar todo tipo de maderas completamente con sus clavos. La batería es super duradera ya que usa muy poca energía.

Bon rapport qualité prix fonctionne très bien

Funkar hur bra som helst ! Värt pengarna😄Bra kvalitet

Super apparaat, werkt fantastisch.

Robuste et super simple à utiliser. Une seul pression et c’est planté. Une autre et c’est rechargé ! Puissant et efficace.