16 Pcs Pro Grade Soundproof Wall Panels,Acoustic Panels,Premium Sound Panels,Better Than Foam,Wedge Design,with Adhesive on Back,for Acoustical Treatments/Professional Studio,12×12×0.4 in,Light Grey

I am extremely pleased with product and how the wall looks now. I have to stop and admire it every time I go in and out of the bedroom. I'm waiting for my neighbors to return from vacation to see if all the sound-proofing worked but I primarily got these acoustic panels for the aesthetics. What I'm counting more on for sound deadening is the 2-pound mass-loaded vinyl (from IsoStore, also sold on Amazon) that's stapled to the drywall and serves as the base layer for these panels. Any further effect these have on noise transmission will simply be icing on the cake.Regarding installation, I had ZERO issues removing the paper backing! ... that is, once you realize that it's quicker and easier to (like another reviewer noted) use a blade to barely scratch the paper (near one of the corners) and just lift the paper only with the tip of the blade. If you're pulling the adhesive layer for more than a millimeter, you're not patient or handy enough to tackle this project, and that's coming from a very impatient person who is no perfectionist.The tile material feels a little bit like fiberglass and at some point, while pressing it down against the wall, it felt like I got a splinter, similar to handling fiberglass without gloves. That only happened once and the invisible splinter went away a few minutes later. It was weird. The tiles are very thick and sturdy and can't be cut with a box cutter blade. However, strong shears worked fine. Also, be mindful of crumpling them while cutting. In the end, I had zero wasted product.If applying to a wall, make sure it's clean and dust-free first. If the adhesive layer goes up against dust, don't be surprised if they don't stay up long. I cleaned the vinyl layer first and, a couple times when I had to reposition a tile, trying to remove a tile also pulled out the vinyl layer AND the staples. The adhesive is VERY strong.My only complaint, but not enough to lower my rating, would have to do with the inconsistency in the dimensions. Some tiles are a very visible 1/16" wider or taller than others. It sort of works out in the end but they can aggregate and you start to notice a stair step pattern starting to form. I had to trim the very edge of a few of these to put an end to that. Once I got to the lower third of the wall (i.e., not eye level), I didn't care as much about it. Consider a subway tile or alternating orientation pattern to better hide these imperfections. I like the consistent pattern I went with, though. There are a few hairline gaps between tiles and they're only visible because of the base vinyl layer being such a strong black color. I may fill them in with a crayon.Even after all the vinyl, tape (used on seams), and stapler, this project was less than a thousand dollars for a 8 x 14 wall and I'm quite pleased with the value proposition of these tiles.

Solid buy if you're looking for a cheap & easy wall covering.

Really good product, been using to sound proof my room door and its been doing an amazing job. 2 years with the product and no complaint. I got to say, its no cat proof :)

Just put these on the common wall along with other acoustic sound proofing panels to help muffle any noise from my home. Seems like it may muffle noise from the other side too. It’s not just noise but privacy that was needed. Sometimes one is just looking for quiet times and conversations with friends and family.

Tiles were not all 12"X12" fortunately I had a good installer to adjust and trim.Color tones varied in different boxes. This is a problem. Notice the lighter tone of some.I needed soundproofing in a office building and this will work perfect for that purchase.I would purchase again in the ivory color.

I love these things, best part is (to my surprise) the glue adhesion pad, sticks easier and faster than spray on gorila glue. The best part is it's thickness to sound proof/deadening qualities. If done right, and if you put a layer of mass loaded vinyl first. I prefer 2lb per SQ inch for floors and walls, and 1.5 pound per SQ inch for ceilings with sound deadening caulk for seams and seals then you layer all six deminions with this thin coarse yet soft to the touch material. You will have an environment of complete sound controll! Be it, a man cave (like me, so my boys and I can chill game and good around without desterbing the girls or our baby) or you are an audiophile and in need of sound controll. You can't go wrong with this particular product! - be warned though, there are a plethora of like alikes and you will waste your time and money if you buy this product from someone else!! Buy from this merchant, save the head ache.Also I think it's perfect for neutral unisex design. It's modern, high life condition in it's appearance, and blends well with it's environment.I can't wait to buy more. this was an awesome product, and I got to bond with my boys upgrading the mancave with them. 😎

These look very nice and modern, but these aren’t what your looking for if your in the market for a noticeable noise reduction. Noises from outside of the door these were mounted on are slightly muffled but not the difference we were looking for. Sticks very nicely and I think it’s a good value for what your getting

We have the worst neighbors ever. They are part of a band that practices in their home, right next to their window, and on a constant basis. AND their window is less than 6 feet from our window. I took the corners off the backing and put them directly on the window. I did NOT take the whole backing off for fear I'd never get them back off again. I then layered a second layer on top of the first, leaving a little gap of air between them where I could. I tested the decibels before and after. They went down by 10-15 decibels. I think it was enough to at least take the sting out of the noise. We felt like it was noticeable. Not going to work miracles but anything is better than nothing.