3 Drawer Wood File Cabinet, Under Desk Filing Cabinet, Rustic Brown

I was looking for a wooden under-desk cabinet with drawers. Solid wood options turned out to be crazy expensive ($300 at a minimum). This plastic-laminate-covered particleboard cabinet for around $95 was a great option. As other reviews have noted, the construction does take a couple of hours. I disagree with the comments about the instructions being confusing. I found the graphics-based guidance to be extremely clear. The parts are all labeled with stickers that match the drawings. All the hardware comes in labeled plastic bags (with extras of each type of screw, dowel, etc., in case you drop one and can't find it, as always happens). Once again, the instructions clearly label which type of hardware, and how many of each, to use in each step. I suspect the folks who had trouble with assembly were in a rush. I covered a table with a couple of towels to protect it and the cabinet parts, and laid all the pieces out in numerical order. That let me sit up during the process. If I'd done it on the floor, bending over for a hour or more would have been a backbreaker! Make sure you use a properly sized screwdriver. I used an electric drill with a screw bit, which speeded things up. The kit included a small, cheap screwdriver, that I think would have resulted in some stripped screwheads and a sore wrist. I was careful to screw things slowly and had absolutely no problems with the particleboard or fasteners. The finished product is very sturdy. Everything lined up perfectly.

⭐️ Review of the DEVAISE 3-Drawer Mobile File Cabinet ⭐️ I recently added this mobile filing cabinet to my home office setup, and overall I’m quite pleased with it! The design is clean and modern, and the white finish fits nicely with my existing furniture. It offers three roomy drawers, with the bottom one designed specifically for letter and A4-size files, making document storage much easier and more organized. Assembly was pretty straightforward with the included instructions, although it took a bit of time to get everything aligned just right. Once assembled, the ball-bearing drawer slides make opening and closing smooth, and the drawers feel solid when loaded up. I also appreciate the rolling casters — this cabinet is easy to move where I need it, whether it’s tucked under my desk or pulled out for easy access. The front wheels have locks which help keep it in place when I don’t want it to roll around. A couple of small downsides: the wheels are plastic, so moving it over thicker carpet takes a bit more effort, and if you fill the upper drawers with heavier items without balancing the weight in the bottom drawer, it can feel a little tippy. ✅ Pros: Attractive and space-saving design Smooth-gliding drawers with good storage capacity Bottom drawer fits standard file folders Mobile and adjustable placement ❌ Cons: Wheels could be sturdier Takes some time to assemble Overall: Great value for a functional and stylish mobile filing solution for home or small office use — would recommend for anyone needing under-desk storage and file organization!

This cabinet goes very well with my existing white Melamine office furniture. I found it easy to assemble if you take your time. All parts fit together well. If you are not familiar with KD (knocked down) furniture there are some simple rules to follow. Do not use any kind of power tools. If you use a powered screwdriver to install the posts that join the sections you may strip out the holes. Instead, use firm downward pressure on a screwdriver while screwing in the posts. It will be easy. The kit includes extra fasteners in case you lose one. The instruction manual is clear, but make sure you identify all the parts. Some are similar, but not identical. There was only one confusing instruction on installing the back panel. It is a little tricky to install the bottom drawer on the rails. Take it slow. If you get anything wrong, you can always unscrew the part and do it over. My favorite feature of the cabinet is that the lower file drawer includes a caster that will prevent a fully-laden drawer from tipping over when opened.

This is the first time I came across so many problems with assembly. The instruction to me was adequate. Since I read most of the other reviews regarding this product, I made sure that will be addressed. There was hole alignment issue on the slider. The holes to mount the center caster was totally off. I drilled out the holes close to the edge of the panel as not to crack the piece when installing the screw. If you use the holes designated to mount the slider, you will not be able to make any adjustment, therefore you will have issues with the drawers not being able to close as it should. Instead, make another hole where there is a vertical oval opening on the slider. Only the front needs to change. One of the screw that came with the handle was just too short. The biggest problem was with the slider for the bottom drawer. It seemed to be binding and before I could even use it, the ball bearings fell out. I tried to install the bearing back, however many actually came out of the hole , and therefore the bearing will not stay in place. I was very disappointed with this product and contemplated returning it. However, it would be such a hassle to get it to the UPS store, therefore I tried replacing the bottom slider with a bottom mount roller slider that I got from Home Depot. That did the job perfectly. If Devaise or Amazon is reading this feedback, I hope they would compensate for this trouble.

Surprisingly roomy . Love the farmhouse look. Very sturdy, and should last a while. the dark brown woodgrain look goes perfect in my house. the set I bought doesn't have a locking mechanism.

I have mixed feelings about this filing cabinet. About the only positive thing I can say about it is that it does its job once assembled. The parts themselves were mislabeled, cheap, and the instructions for assembly were vague, making putting the thing together beyond frustrating. I assembled it alone successfully, but I strongly recommend you embark upon this crusade of personal suffering with a friend if you know what's good for you. The wood is composite particle board which is basically compressed sawdust. It will NOT handle any abuse, so once it's together, don't attempt to take it apart because you're likely to strip the drilled holes and nothing will fit together anymore. The slides for the drawers are, naturally, made of the cheapest possible sheet steel you could expect to find. For the price, I kind of expected it, but they neither glide gracefully nor will they stand the test of time. I give this thing 3 years max if you fully load the draws with any substantial weight. While I'm on the subject, the instructions for putting the slides on the draws were, again, vague and the images are misleading. Make sure you put the slides flush on two sides against each drawer, wrapped around the bottom corners and the wheel facing the rear. If only one side of the slide is touching the drawer, you've done it wrong, and the drawers won't fit once you try to insert them into the cabinet. All in all, it works. It's frustrating as hell to put together, and I don't expect it to last for very long, but it works. I can't say I would recommend it for anyone. You get what you pay for. ¯\_(ツ)_/¯

Assembly did take a while, but it was really easy. I see reviews about it being uneven or doesn’t shut but mine came out perfect. My husband and I were putting it together and at the end the drawer didn’t go in all the way (I see this on another review), but it turns out on one side we screwed the rolling thing about an inch off, so it was our mistake. We moved it to correct spot and it worked fine. I love this and I want to get more now! I’m sure the bad reviews are by people who didn’t do it right or are just too impatient. Although yes a few holes were missing where you need to put a screw. But we have a drill so it was fine, and it was in a spot where you really didn’t need one anyway (it was three screws to hold the wheel, but two held it fine, where the third you need to create a hole). Strong enough to hold your basic office supplies, papers, folders, etc. Wheels work fine on carpet. I hope this all makes sense!!

I needed a printer stand and this was the right size. The wheeled base makes moving it around easy, but don't expect a high quality piece of furniture. Assembly was easy, but time consuming. It took approximately 1 hour, and I'm pretty handy and ran into no snags... there are just an awful lot of parts. If you're not handy, you should probably pass. The material is laminated particle board, which works, but don't get it wet or place it in a high humidity environment. There is no lock, so keep that in mind if security is a concern. Overall it meets my needs as a cheap office printer stand with some additional storage, but if I really needed a file cabinet I'd look for something else.

The item is a little darker in color than what is showing on Amazon if you are trying to match it with other furniture. The cabinet is very sturdy & well built & works well. I would certainly buy it again.

me gusto, es un buen producto