18 pcs RO fittings&30 feet tubing （with Cold Water Adapter Valve）

Works as advertised. The cutter was sharp and cut the tubing just fine. The diversity of the connectors were great. The tubing seems great quality. No leaks when connecting to RO system.

TLDR: 🌟🌟🌟🌟🌟 This kit provided the ideal solution for my under-sink water heater installation, with a great selection of fittings and ample tubing. I was in the midst of setting up an under-sink water heater and faced the challenge of integrating it with my existing water line to the refrigerator, which had a smaller-than-usual 1/4" tube. My initial attempts to install a tee in the line were unsuccessful, resulting in leaks despite trying different fittings twice. Then I found this kit, which turned out to be exactly what I needed. It came with a comprehensive assortment of fittings, making it much easier to find the right parts for my setup. Additionally, the kit included plenty of tubing, which was a huge relief. A crucial tip I learned from this experience is to avoid using clear 1/4" tubing as a substitute. It's likely to cause leaks and can jeopardize the whole installation. This kit, on the other hand, provided reliable materials that ensured a secure and leak-free setup. Overall, I'm extremely satisfied with this kit. It effectively resolved my installation challenges and made the process of setting up my under-sink water heater much smoother.

I've been having a never-ending problem with leaky pontoons on my pontoon boat. I decided to fabricate a pumping system. I used this 3/8" tubing and quick connect fittings to connect a 12 Volt water pump to the drain plug holes. This kit came with a special cutting tool that makes precise cuts in the tubing. I used 90-degree, shutoff, 3/8" pipe thread, union, and "Y" fittings. It was amazingly easy to assemble and it works great.

Accurate product

Has everything you'd need. I finished my project and still have house and all types of fittings if ever need to do another project. Good quality.

Everything works as it was designed including the auto shutoff devices.

we purchased this for our Keurig coffee maker, and I did not expect much. However, I was greatly surprised, and this has definitely been worth the money. I love the fact that I don’t have to fill our coffee maker up two or three times a day anymore! This was also easy to install and very simple. If you are thinking about switching your coffee maker over this is worth the money!

We added an RO water line over head to the fridge from the sink (on opposite sides of the kitchen)..My husband is a plumber and I ordered these for him to put it in, he was really suprised with all the items it came with and it even comes with a shut off, so if anything happens we can shut off at the fridge area should we need too and makes life so much easier vs having to shut off at the sink.

This kit means I no longer need to refill the reservoir on my Jura coffee machine. I just clipped the ball-cock on to the edge of the reservoir using a modified stainless steel clothes peg (no drilling into this expensive machine required). The system is 100% reliable, switching the water flow off when the reservoir is full. The components are quality and it even came with a tube cutting tool for nice clean burr-free cuts.

SIze is as stated. Installed without issues.

It came with way too many extra parts but I guess that's better than too few

Exactly as shown and ordered just did repair and seems to have done the job

Lots of the little bits you need to make connections. The cutter is especially handy