LLPT 94 Adhesion Promoter 10ml Bottle Primer 1 Pack with 10 Dry Wipes

It works well as intended. I was able to get some carbon fiber trim to stick on my door panels. I first tried without the adhesion promoter and the trim would not stick. Once I applied the liquid and let it dry, it stuck perfectly. It's a good product but the pads are not very wet so even though the part I was attaching was rather small, it took two pads to get enough on the panel to allow adhesion.

I used this to mount a LED flexible light strip in my vehicle because double sided tape alone wasn't holding tooo well. I used this and it the double sided tape has been holding for a few months now with no signs of failure. This stuff works and easy to apply and worth the money.

I used this to replace an existing 3m sticky pad on a dash camera I installed incorrectly and it has worked well initially.

I like the wipes, this works well.

When mounting stuff on the car, you definitely need to use adhesion promoter, even for the most expensive 3M mounting tape. This several dollar extra will save you hundreds dollars on the road and headache. This aftermarket promoter works effectively, same as the 3M one. It promised a strong bond and my rain guard survived thousands miles of rain, snow and sun .

Works great, as expected. Need to let it dry before adding double stick tape

Opted to use this brand of adhesion promoter instead of the 3M 4298 pads or the Primer 94 pen to get the most bang for the buck. As expected, the pad that I opened up was dry but I just laid adhesion promoter from the bottle onto the surface I was working on with the provided brush attached to the inside of the cap and then used the dry pad to carefully spread it over the working surface for complete coverage. Suffice it to say that I have more adhesion promoter left in the bottle than I will most likely ever need (along with 9 more pads). If you are a hobbyist that utilizes adhesion promoter often, this is definitely the best way to go to save costs. And it works.

As others have said, the pouches are just a dried up cloth in them. The product in the bottle seems to work just fine.

Previously I had cleaned the area of my car's dash with 90% rubbing alcohol, and applied my 3M Dual Lock which had the acrylic backing tape. It held fine for a couple of weeks, but slowly started to let go, so I bought this adhesive promoter to see if I could improve the bond. I re-cleaned the area with alcohol, and taped off the remaining area with masking tape so as not to get the adhesive promotor anywhere it wasn't needed. The area has some texture to the plastic, so I did three coats of adhesive promoter, letting each coat dry for a few minutes. Then I applied a new strip of Dual Lock and the bond was immediate. No second chances on alignment! I'm glad I got it right the first time. Clearly a superior bond vs without the adhesive promoter. I only needed a single foil pouch to do all three coats, and the applicator had plenty of product on it, not dried out as many have found. I did tighten the lid on the included bottle when it arrived, as there was a strong smell of the product on arrival, but no apparent leakage of the fluid.

I was to stick a security camera with 3mm tape and this adhesive promoter on a wall and it seems to be holding well even during winter!

Reçu une bouteille avec rien dedans ...La bouteille est vide

Always work grear

Works very well. Wipes in satchels are wet and work amazingly