YESWELDER Flux Core Gasless MIG Wire, E71T-GS Mild Carbon Steel .030-Inch Diameter 2-Pound, Strong ABS Plastic Spool Welding Wire (2 Packs)

New spool for a new flux core welder. It feeds smoothly, without binding or unspooling, and burns well. I'm still tweaking the welder, but at this point it seems to have a good melting point and welds with decent spatter control and no tip burn or fouling. As we know, the versatility of flux core makes it preferable to stick or gas-shielded welding for some positions, and outdoors where wind can affect the gas. Right out of the box it seems a bit brittle, but I've found 0.030 flux core to often be that way. By the time it's loaded and run through the cable it's fine - just handle it gently until then. This wire comes vacuum-packaged in a foil wrapper to protect it from rust and contamination. Better packaging than some competitors, which can arrive with light surface rust or oxidation that can affect the quality of welds. And the price is right - about half the price you'll see at the big home improvement stores. Based on the many positive reviews, this might just be the preferred wire for beginners and for experienced welder alike. One thing I wonder about is the thickness of the spool itself. On my new welder it seemed to have a little extra thickness, enough that the spool, tension spring, spacer, and washers left too little room for the tightener wingnut to engage the spindle's threads. Might be an isolated problem, but if so you'll need to find a workaround.

muy buen precio y buena calidad

Excelente material para el trabajo que realizo, si complace mis expectativas de lo que esperaba del microalambre

My new report: the better miller machine does VERY well now with the flux core wire AFTER I realized that my welders polarity was reversed!!! I was ready to give up on the Miller and go back to my cheaper Lincoln. I’m glad I found out about the possibility of it being a polarity issue and I swapped the ground and gun wiring. Because of the current quality of weld, the packaging, clean wire, smooth quiet feed, and reasonable price, I’m changing to 5 star. ——————— old review below—————- welds nicely but wow, what a LOT OF SPLATTER!! I tried multiple settings, and it's NOT just because the wire feed was too fast. I ran this with my new Miller 141 and lincoln flux core wire through my Lincoln 140 welder on the same metal and the difference was NIGHT AND DAY! Virtually NO splatter with the Lincoln wire and TONS of large splatter with the Yeswelder wire! This splatter could NOT just be wired off either, must be ground.

Tenía mis dudas acerca de este producto vs el lincoln, pero al usarlo me sorprendí de la facilidad que se funde sin casi hacer chisporroteo, deja limpio el cordon. Súper recomendable!!