TetraClean Alkaline Based AC Coil Cleaner | High Foaming Instant Cleaning Liquid | Compatible with Commercial & Residential Air Conditioner | Powerful Formula for Deep Cleaning & Improved Cooling/ 5L

Works perfect. I used for my AC cleaning. Dirt and dust inside the ac coil is removed by the foam that it creates within few minutes. I recommend using 50% tetraclean solution and 50% water ... Works perfectly .... It can be used for cleaning car radiator too.... But after spraying with tetraclean, spray clean water till the foam and chemical is wash off... Otherwise u will see white layer....High recommended but use with caution and dilute the solution for better results.

Very bad and useless product. Nothing is working. Absolutely wasted money.

Tried some spray foam cans which do nothing, I do know that you have to be very careful with chemical cleaners on evaporators and micro channel coils(car coils) I got this to clean my ac which has never had a proper coil clean in it’s 12 years use(we just clean the exterior with a brush)Spraying on a dry surface did not get much foaming, so wet the coil and there’s a lot of foam it did work to get the dirt out but the residue it leaves behind is a pain to clean and you need to use a lot of water to rinse the coil. I guess this is lye as it left a powdery residue.Do not use a brush and brush while the cleaner is on I tried a small area on the corner and the fins just flaked off. I focused on doing small areas so that I could have the cleaner for under 2-4 minutes and start rinsing that portion and worked in sections to clean the entire ac.Air flow did increase a good amount and I saw a lot of dirt come out which was not visible.It did it’s job however I would not use this cleaner again just as a last resort.This cleaner does give out fumes and make sure to use gloves and if it gets on your skin then rinse it well.Try not to spray the cleaner on the copper bends just on the fins don’t try to get shiny clean just clean whatever dirt it can in 5 mins and rinse off.So far no damages leaving that small portion where I did try to brush.Do not use this on coils which have coating. And if there’s no airflow issues just use water to clean don’t use harsh cleanersFor car coils (evap and condenser) try to find a cleaner that’s micro channel safe or an evaporator enzymatic cleaner. Or try their natural ph cleaner(green)

Saw some review in YouTube and brought this product.Just an average product, it's non foaming even after leaving for 5-10 min nothing happens.clogging and scaling in coil was as such, did another application and brushed it there was some improvement.But the product was to reduce the brushing effort(apply leave for few minutes then rinse) .Not satisfied with the product.

Best performance

Like they show in advertisement that with foam all the dust will come out floating..it nothing like this,dust kept on sticked to coil nd metal parts.i used it with diluting it.

Why did you pick this product vs others?:Very bad experience there is only asid no foam quality is very poor

Best and effective