22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor , Black

I recently picked up the UTG .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor, and it has been a game-changer for my shooting setup! This adaptor is incredibly well-made, providing a solid and secure fit that allows me to easily mount my accessories without any wobble or concern. Installation was a breeze—just snap it in, and I was ready to go in minutes. The low-profile design is fantastic, ensuring that my optics sit at the perfect height for quick target acquisition. I appreciate the versatility it offers, allowing me to use my favorite Picatinny accessories on my airgun without any hassle. The durability of this adaptor is impressive as well. It feels sturdy and reliable, and I have no doubts about its performance even under heavy use. It’s also lightweight, which is a nice bonus, as it doesn’t add unnecessary bulk to my setup. Overall, the UTG adaptor has exceeded my expectations. It’s functional, easy to use, and enhances my shooting experience significantly. I highly recommend this product to anyone looking to upgrade their airgun or .22 setup!

Worked great for Burris P.E.P.R mount on an AirForce Talon, just had to remove the set screws. It's the last thing in the description, but it's nice that you do get a pair.

4 stars only because it will not fit both rounded and flat receivers. Overall a very good design and well made part... unfortunately, the design will not allow it to be used on a rifle with a rounded top receiver. I purchased this to be used on my Anschutz Mod 64 sporter rifle. There was just not enough clearance at the base of this adapter to allow proper fit. Low profile is good, but adding another 1/16 to an ⅛ of an inch of clearance would have made this a more universal mount adapter. I had to buy another adapter. It will however fit onto my RWS airguns with a flat base with no issues.

These are EXACTLY what I needed to mount my red dot and they work perfectly! Very well made; good fit and finish. Add almost no additional height to the sight's picatinny mount. NOTE: Each of the two pieces that come in this set have a small "set screw" which is intended to mate with "stop pin" holes in Dovetail rail if so equipped. If your rail (like mine) does NOT have provisions for stop pins, then simply remove the set screws. Mine "fit like a glove" and are holding perfectly. I highly recommend these for a truly quick, simple, effective, and affordable solution to securing a Pic mount to a Dovetail rail.

This is an amazing item! You insert it into a picatinny mount for an optic or scope allowing it to attach to an 11mm dovetail mount on your firearm. The other items I've seen add at least 1/4" to the height of your optic when mounted. This item adds no height because it nestles inside the picatinny mount on your optic. The pressure of tightening the picatinny optic compresses this adapter, holding it firmly in place. This is so clever and so useful!!!

I will keep this simple. If you are using a QD accessory on the rail, it might not work, because of the tolerance. IE: OLIGHT picatinny QD, with 11 mm. dovetail on AirForce Talon. I'm disappointed because it seems like a good solution. Happy shooting everyone.

This is the most ingenious solution for adding an optic to your air gun. I wanted to avoid using a riser with a rail that was several inches long, especially when it has to go over the small magazine for the rifle. This allowed me to put my red dot behind the gap. Looks absolutely seamless too, you'd never know it's there.

I bought this adapter so I could use weaver style scope mounts on my Marlin 22 that has a dovetail base. The quality of the item is satisfactory but it uses springs to push the adapter outward. You squeeze the adapter together and snap it in to your scope rings and then mount the whole thing to your dovetail. The problem is you are relying on the scope rings to tighten the adapter to the rail and have everything lock up tight. I had to tighten the rings very tightly to get them to stop wobbling. Also, there is a set screw on the adapters that you can only screw up or down from the top. There are no instructions on what to use it for but I figured you screw it up to help it tighten the adapter in the scope ring. But since you can't tighten the screw from the bottom then you have to adust it, test fit it and then adjust again till you get it right. I also made the mistake of thinking the set screw was to be screwed down to tighten the fit between the dovetail and the adapter. But all that does not work and just causes scratches or nicks on the rail. In my opinion the adapter would be much better designed if you could attach it to the dovetail and tighten it there first. Then attach the weaver style rings to the adapter. If it holds tight and does not wobble I will keep using them. But I'm not completely sold on them yet.

装着がワンタッチなので、とても便利です

Fits perfectly and doesn’t fall out when you are swapping scope between rifles . Really solid design , I use mine to slap atn scopes onto traditional scope grooves .

buoni

Acheté pour recycler deux points rouges auparavant fixés sur rail Picatinny sur des armes avec rail 11mm. Bonne qualité, finition impeccable, facile à monter, fixation solide. Parfait Juste penser à huiler les ressorts des axes latéraux ..

Perfekt um ein ZF mit Pica.-Aufnahme an ein KK Gewehr zu montieren. In meinem Fall eine Walther KKJ im Kaliber .22 Hornet mit 11mm Prisma Schiene. Sehr stabil und einfach zu montieren. Bei dem Kaliber (.22 Hornet) auch absolut schussfest. Wie es bei größeren Kalibern aussieht kann ich nicht sagen.