aikeec USB Truck Simulator Shifter for PC, ATS ETS2, G27 G29 G920 | PC USB Truck Simulator Gear Shift Knob for ATS ETS2, compatible with Logitech G25 G27 G29 G920 TH8A

I recently purchased the USB American Truck Simulator Shifter and I’m extremely impressed. The first thing I noticed was the build quality — it feels solid, durable, and well-made. It doesn’t feel cheap or flimsy at all, and it has a nice weight to it that makes shifting feel realistic and satisfying. I put this on my TH8S shifter and installation was easy it came multiple adapters to ensure a nice solid fit Installation and setup were incredibly easy. It was basically plug-and-play with my PC, and I had it working in American Truck Simulator within minutes. No complicated drivers, no confusing instructions — just simple and straightforward. Overall, this shifter adds a lot of immersion to the game and performs exactly as expected. If you're serious about your trucking sims, this is definitely worth it.

Bought this to go with my t300 wheel and pedals because using the paddle shifters as range selectors just felt wrong. Other options for truck shifters like this can be in the hundreds of dollars so felt like this was a low risk to give it a try and it turned out to be great. Shifter was instantly recognized with no drivers. Both switches and the button work perfectly in Euro truck simulator which is what I use this for. Shifter itself feels pretty good. About the quality you would expect from a stock shifter in a fleet truck. Nothing fancy but it doesn't feel super cheap either. No sharp edges or weird manufacturing defects. Switches feel good to click. The only part of the whole thing that bothers me is the bottom which features kind of an ugly unfinished look almost as if there is a plastic trim ring that is supposed to go around the bottom that is not included. This isn't a big deal because it's just aesthetics and I will probably end up 3D printing beauty ring to go there eventually. Mounting was relatively easy on a fanatec club shifter. The threads of the knob do not match up with the shifter so for a while I was forced to use the included grub screw adapter. The included adapter worked okay. It comes with a variety of rubber caps to go over your shifter to stop you from marring the threads and they did that job just fine. Unfortunately, the grub screws kept loosening themselves with use, so after pretty much every session the shift knob would be floppy. The adapter also adds additional height to an already pretty tall shifter which felt slightly awkward. I scoured the internet looking for a thread adapter and while I was unable to locate any on any of the usual sites including McMaster, I was able to track down the exact thread adapter I needed that was even the perfect length I needed from a Chinese seller on eBay. A couple weeks later it showed up at my door and I threaded it on and it went mostly perfectly except for when it was fully tightened the indexing of the shifter was off so it was about 90° too far to the right. Luckily I was able to 3D print spacer to fix this issue pretty quickly. So now my shifter sits perfectly centered on the shaft and is at the correct height. Overall a pretty great experience for the money, especially if you're willing to do a little tinkering. Construction seems pretty good. The cable is literally just a Microusb cable plugged into the control board inside the shifter. So if the cable ever goes bad you can just change it which is really nice actually. It also seems really serviceable as all of the parts seem like off the shelf components and are easily accessible by simply popping off the cap, so if any of the switches ever start going bad you can probably just swap them out for a couple bucks versus buying a whole new shifter.

After a few days of use, I can safely say that this was a good purchase. The shifter is well made and feels like a quality product. The buttons are responsive and well placed, so you are unlikely to press them by mistake. I use it for ETS2 and ATS, and it feels much more immersive than the original TH8A knob, the small round one. It is much bigger and taller, fits well in the hand, and genuinely feels like a truck shifter. Regarding the USB cable, the setup is almost plug-and-play. You simply need to add an additional controller in the settings, as explained in one of the product videos on this site. The shifter is then immediately recognised by the game, and you can customise the buttons however you like. The installation process is the only part that I found slightly less straightforward. You first need to place a rubber sleeve around the shifter shaft and then tighten it with screws. Be careful not to overtighten the screws, as you could damage the shaft.

Great shifter. Plug and play no fuss no programming and the extra button is very nice

Works great. I’m on Apple and this is Windows-only out of the box, so I was not able to use the included chip. I put an Arduino board in it and reprogrammed it for my application, and it feels pretty good. However, it doesn't naturally want to stay put on my Logitech Driving Force Shifter that comes with the G920 wheel. You have to clamp it onto the metal peg sticking out of the shifter unit, but it just uses a rubber sleeve adapter instead that you clamp onto, and the knob wants to spin in my hand while using it. Other then that it’s a good add on.

My husband bought this USB American Truck Simulator shifter for his gaming setup, and it’s been a great addition. It was easy to connect to his PC and worked well with his simulator. The shifting feels smooth, the buttons are responsive, and it makes the driving experience much more immersive than using a keyboard. The build quality feels solid, and it has held up well during regular use. If you’re looking to make your truck simulator setup feel more realistic, this is definitely worth considering.

I have this knob for my Logitech shifter. It was easy to set up and I’ve put about 20k in game miles on it and it works as it should. Get value shifter

Works fantastic. Not a lot to say quality made, so far I fitted it to a Logitech shifter, a Moses shifter, and the last expensive Logitech shifter. Works on all of them.

Took ATS to the next level and quality has been good so far after quite a bit of use.

Una maravilla. De calidad, fácil de instalar y funciona perfecto. Lleva el simulador a otro nivel.

商品の造りはおもちゃっぽくなくしっかりできてます。しっかりトラック気分味わえます。右手でも左手でも操作に違和感ありません。やはりアメリカントラックのミッション味わうには延長ロットで床から長くしてみたいですね。残念点はVNMシフター経由でdefモードの認識してくれず残念。USB接続するとGAMEEXTENDと出るのですがウインカーのデバイスと同じになり見分けが出来なくなります。windows立ち上げ時にusb認識に失敗します。立ち上ってから接続すればいいんですけど。少し残念点もありましたが、説明書と8-10-12とアダプターもついてます、売り手の真剣な熱意を感じられます。古いデバイスをひっぱりだして組み込んでトラック気分になりたい時だけ接続するといいと思います。ありがとうございました。

Si la vdd me gustó mucho y es súper fácil instalar

perfect build quality, easy to setup on the shifter, easy to setup in games, recognised straight away, only problem is had was the wire was very long and hard to hide but worked great