JACO FlowPro Digital Tire Inflator with Pressure Gauge - 200 PSI

I saw tire inflators that would supply air pressure for the cost of this device, but I felt build quality and accuracy were more important than adding complexity and ability. This is a really nice addition to my air compressor. It is incredibly accurate and is easy to use. The nozzle that connects to the tire fits easily and securely. The build quality is as expected and I highly recommend to anyone who needs consistent and accurate tire air pressure.

Got the JACO FlowPro digital tire inflator gauge today just 2 days after ordering. Came w/ 2 AAA batteries already installed. I just pulled the insulator strip, and it lit up!. "00.0 psi". Came w/ a quick disconnect male air hose fitting AND a small roll of Teflon tape (what, no wrench?)! I've got a couple of mechanical dial gauges that I trust, (but they're not inflators), so I compared the JACO to them on a tire w/ 37 psi. They all read within 0.5 psi of each other! This comparison was done using the JACO as a gauge w/o an air compressor hose connected. It lights up (wakes up?) and reads tire pressure as soon as it's straight clip-on hits the tire valve. It bleeds off (goes to 00.0 psi) as the clip-on is removed from the tire valve. The last gauge reading stays lit for 2 mins, then goes dark. The 2 AAA batteries will probably have to be replaced in about 10-15 yrs. from now. The gauge is activated to "On" again simply by pressurizing it. That's nice. No switch to turn on/off. And it always comes up w/ the units you set (psi for me) w/o having to choose every time you use it. Using the tape provided, I installed the air hose fitting (after checking for correct fit-up to my quick disconnect compressor hose chuck), snapped in onto the hose, and squeezed the trigger. W/o being connected to a tire, the gauge showed the compressor's tank pressure w/o leaking or blowing any air through it's straight clip/chuck. How cool is that!! Push the bleed off, and it goes back to 00.0 psi. So here's the big test: Inflating the rear tire of my motorcycle. The rear tire valve is only visible for 25*-30* (out of 360) next to the floor, under the muffler and rear cog. Indian m/c owners will understand. Unless you have a big m/c lift to get this monster up a couple feet, you'll be laying on your side on a concrete floor (if you're lucky). Once I got it clipped onto the valve, the gauge read the same as the bike's TPMS. Great! Squeeze the trigger, let off and read the pressure. Repeat. Opps! Went too far. Wanted 41 psi, but got 42.5. No sweat. Push the bleed off button, read, repeat. And it's right there. 41.0 psi. Pull the clip chuck off the tire valve and I'm done (well ok; replace the valve stem cap.). That was so much fun that I did the front tire (it's much easier) just for laughs. Finally after my 50 yr. collection of pressure gauges, inflators, inflator-gauges, and air chucks of all shapes, I've got something that works as it should. Right out of the box. Batteries included, Teflon tape included, air hose fitting included, and even a tire valve screw-on fitting (if you don't like the clip-on) is included. You can read it in the dark, it's dead accurate as far as I know (in the 36-41 psi range that I tested), reads in 0.5 psi increments (didn't try any of the other 3 units) supposedly up to 200 psi, will read upstream and downstream pressure, turns itself on and off, and won't break the bank. What's not to like? Thanks JACO. BTW, I do very few reviews (can't ya tell?), but for this device I had to give my 2 cents. Also, I did not receive any compensation for this review, nor do I know anyone from JACO. I paid the full amount from Amazon, got it 2 days later, and wrote this the same day. I tested it in 65* F temps., so I can't speak to how it'll work in temperature or pressure extremes. Also, I can't say how much abuse it'll take (I'm a home mechanic) in a commercial environment.

Works excellent, highly recommended! Latches onto valve stems and stays, very accurate PSI reading. Feels well made and so far has been very durable. My brother and father love theirs I bought for them and the screen is easily readable.

I love this tire gauge/inflator. It works well, feels well made, and makes accurately inflating and checking tire pressure so easy. I was so impressed by it I immediately bought one for a family member. After about a year, I did experience some issues with the readout. I contacted JACO customer service and they immediately sent out a new one. Wonderful company that stands behind their products!!

This tire gauge seems like a great compromise for a homeowner who wants quality without paying professional garage-shop prices. I just received it today, so this is based on my first impression, but it appears to be very well made. It connects easily to my quick-connect air compressor hose, and the locking air chuck securely latches onto the tire valve, freeing both hands to operate the gauge and inflator. The braided steel hose feels high quality and durable. The only reason I'm giving it 4 instead of 5 stars is the storage design. There's no built-in way to neatly secure the braided hose when putting it away. If you keep it in the original box, it's not an issue, but I store it with other tools, so I'll probably need to add a Velcro strap to keep the hose neatly coiled and organized.

This is a very accurate and very handy tire pressure gage I really like it

Very well made, accurate and no more leaking air while using. Very positive attach and release from valve. Button on side to bleed off over fill. Understand that while filling, the gauge does not read tire pressure until you release the on-off lever. I highly recommend.

This works beautifully. It attaches securely to the valve stem on your tire wth one straight positive push. Depress the handle to dispense air from your compressor. The dial face reads pressure each time you release the trigger, so you can quickly see when you reach the desired tire pressure. Good engineering by JACO makes it a simple and easy task. When you are done, it releases with a simple thumb-squeeze and pull. Head for the next tire. So much easier than what I had been doing for years, which is trying to get a more fiddly right-angled valve fitting to attach cleanly to the tire (lots of missing and hissing involved) and then holding it firmly in place and waiting and waiting and guessing whether I had put in enough air, disconnecting it, checking with a separate gauge, reconnecting the fiddly connector and adding more air... That was the old way. This JACO FlowPro with gauge is so much better. I am very glad I have it, and annoyed with myself that I did not find it years ago.

Wait a second and it'll see you the correct result.

Best airline tyre gauge I’ve ever owned. Not just accurate and easy to use but actually connects to a valve without leaking air like every other one I’ve ever owned. It might be a little pricier than some others, but it just works perfectly. Buy it.

Provato immediatamente, ho avuto un’ottima impressione. Misurazioni consecutive sempre identiche tra loro, sembra molto ben fatto

Very nice gauge assembly. Should have bought one of these years ago. Comes with battery installed and fitting to connect to air compressor. Compared pressure to a couple of manual ones I trusted and it appears to be very accurate. I like the LED display especially if working in a dark garage or at nighttime.

I love this tyre inflator! Super easy to use, is deadly accurate in pressure reading for the price, can be used to check pressure without a hose attached, and super easy to inflate with when connected to your compressor. An absolute top buy, will never use anything else again!