Question 1

Want to go from 10' to 30' on my weber ng grill. is that length okay and does weber use 1/2" or 3/8". looks like 1/2"

Accepted Answer

Not a problem going from 10' to 30', but we need to know which Weber Grill you have to determine the size of hose ID you need.  Can you give me the Model of the grill and the year.

Question 2

Weber genesis ii s-310 ng ss - will this work as a replacement?

Accepted Answer

This will be too large for teh 310.  You will need to use the 3/8" hose and quick disconnect.  To buy the 3/8" kit, go to https://www.amazon.com/dp/B06Y5YRDZ3?ref=myi_title_dp

Thanks,
Bill

Question 3

Is 1/2" x 30 feet sufficient diameter to support a 6kw generator?  based upon btu rating, i assume its plenty, btu to kw may not apply for engine use

Accepted Answer

It depends what fuel the generator runs on - natural gas or propane. Lots of things to consider - type of fuel (NG or LP (gas or liquid), type of attachment to fuel supply, regulator(s) used. You definitely have to do your homework! Manual for generator should show fuel consumption at max. load. I did plenty of calculations for my 4.8 KW propane genny - fed from a 20 or 100 lb. cylinder - needed the proper 2-stage regulator (RV type) to get enough volume thru it, while reducing pressure properly. I think I figured the genny  needed 100,000 BTU's/hr. at full load. In my case this hose worked. Very well made using quality materials.

Question 4

Is this the correct sized replacement to fit a natural gas pre-2011 Broilmaster Body Style 3?

Accepted Answer

The 1/2" would be too large for this grill.  You will need a 3/8" hose and quick disconnect.  This can be purchased at https://www.amazon.com/dp/B06Y6KLX1Q?ref=myi_title_dp.

Thanks,
Bill Diel

M.B. Sturgis Inc.1/2" ID Gas Grill Quick Disconnect Gas Connector Kit (8 Feet)

Description

Common Questions