Post Buddy Pack of 4 Easy Fence Post Repair Kit (to Fix 2 Broken Wood Posts), Quick and Simple to Install, Effective, Durable Steel Stakes

I wasn’t sure this Post Buddy repair kit would work for me, given my fence posts barely have any concrete around them, but I decided to give it a try anyway. To my surprise, it worked really well! I hammered it into the ground to secure the post, and it’s now stable - still wobbles a tiny bit in high winds, but it’s a huge improvement from before. The kit isn’t super cheap, and it would be nice if there were more than two stakes in a pack, but it’s still far cheaper and easier than replacing the entire post. Very happy with the results.

Excellent quick fix . Dreaded the thought of having to dig out and re cement gate Posts !! Used these to repair wooden posts that hold heavy duty metal driveway gates very easy to hammer into place and screw onto existing wooden posts Excellent easy quick fix , the posts are solid and very sturdy. Would highly recommend

Do the job well. Large - 6ft fence post was rotten through and wobbling in wind. Still wobbles a bit but not falling over. Is only a temporary fix but buys time to do the job properly.

This was one of those rare products that significantly exceeded my expectations. Arrived earlier than expected. Very sturdy post supports. Took 15 minutes from walking out of the door with them to completion of the job. My rotten post embedded in concrete is now rock solid, and the repair is almost invisible. The post is black and the Post Buddies are red oxide colour so I sprayed them after fitting with Hammerite. Worked a treat. I would DEFINITELY buy another set of these if I have another rotten post - they are excellent.

Quick and easy way of supporting fence posts. Ideal for posts upto say 1M but not sure would be so effective on taller ones 2M ones

These really worked was easier than expected . Put two on each post

I wouldn't call it a "repair kit" because it doesn't come with the required fitting screws, but the stakes look just the job!

I used two kits on two posts that had very small movement. Installation was easy, particularly using the recommended weight of lump hammer. Rather than hold the post buddy as I hit it, I used a small wedge of wood to bring it off the post and this worked well. One post doesn’t move at all now. One post moves an extremely small amount. No idea how long they will last but this was an easier option than lifting paving slabs to put in new posts. They took the fence paint I applied to them to blend in. Would have given 5 stars if they had completely secured the posts - the posts weren’t snapped or moving much at all before installation.

I could not hammer them between the post and concrete as advertised.

I was little skeptical, but the steel is thicker than I expected and seems to work well. The top of the concrete was lower than the ground so the post rotted. I added 2 braces and build up the concrete to be above ground to prevent further deterioration. Some posts were not as bad, so I added 1 brace to the front and added concrete. Time will tell if this works. 2 of the posts are too far gone and I will do a proper replacement pulling the concrete up,.installing new post and concrete. If the posts are not too far gone, this system should work. I was also surprised that it was not that hard to hammer the brace in, I used only a regular hammer.

I used this to fix a fence post that had completely rotted through at the ground. The gate was attached to that post, and it wasn't working very well. With these steel pieces pounded into the ground, on adjacent sides of the post, the fence is now decently solid, and the gate works well. It has lasted for two years so far. We still have to replace the fence at some point, but it's allowed us to defer the costly fence replacement project.

Bent at first application

Excellent product to repair fence