MIG Welder Flux Core Welding Machine 110V 220V 120A Wire Feed Welder MIG ARC MMA Lift TIG No Gas 3 In 1 Multifunction Digital Welder IGBT Inverter Technology

The media could not be loaded.  This a good little welder. It’s a good value. It’s a nice compact size. It gets the job done. The instructions were a little confusing when setting it up. I had to have a little help from a relative that knows how to weld. But after it was done, it was good to go. We welded a hauling trailer with ease.

I just received this on June 9,2021. What a great piece of equipment! I have very little welding experience, but I was able to do some simple jobs right away. They weren't the best examples of welding, but they were a good start for me. I highly recommend it. I have an Arc Welder, but I'm 80 years old so I don't have the steady hands needed for Arc Welding. Lots of sticking and very few welds. For someone starting out, this was a very inexpensive way and very easy to use.

I'm not a professional welder but.....Everything on this screams "I was designed and built in the sweatiest of sweatshops by children who force the round peg in the square hole and the engineers definitely failed Dear Leaders Technical College of Reverse Engineering and IP Theft. As a frequently satisfied customer at Harbor Freight I can say that this is to Harbor Freight as Harbor Freight is to Miller or Lincoln. It even smells cheaper then Harbor Freight. EPIC fail. I don't know how it welds or even how it feeds wire. This didn't arc or spool when i got it. I can say the cooling fan works pretty good. Unfortunately you can buy cooling fans for way cheaper. You can even buy better and more reliable cars for $150.

This is just what I needed to do my muffler work, works great. The cables are shorter than I would have wanted however I'm happy with the built quality.

This was the first welder I've owned, and the first MIG let alone gasless MIG. Stick welder worked as expected, the MIG took some time to figure out. First issue I had was the tip on the torch was the smaller .8, and the spool of wire was 1.0. After I swapped it out with the included 1.0 tip, it fed fine. After some failed attempts to do test beads, I went to youtube and found beginners to gasless MIG welding videos, and in little time I was up and welding.I wish there was better instructions on the dials, I pretty much just played around with them until I got a good bead with good penetration, but the numbers are not intuitive to the voltage and current levels, as they are just labeled 1-10 rather than actual voltage/current output.All in all, it's been doing good in my small repairs around the shop, and I would recommend it to someone needing a small project welder

This thing is the best value. You can’t beat it. It welds pretty well and I’ve only been using 120v. It’s easy to carry around and opens so many opportunities for different builds. I can’t wait to buy a TIG torch and try it with this welder.

First the bad.1. Side door that covers the mig wire does not fit correctly, so the latch is not what is holding it shut the door is crooked and wedged in.2. The mig torch came with the .8mm tip installed but the wire they provided is 1mm. The 1mm tip is included however the cup on the mig torch is set oddly so I had to pull the torch sheathing down a bit and put a wrench on it to remove it and then get to the tip. I then had to tap the cup on with a brass hammer and seat it properly.3. Feels very cheaply made and was not packaged very well seems like the welder was put in the wrong box.4. Manual is horrible and doesn't provide any instruction on use or real details about the machine.Now the good.Welder works fine with both Arc and Mig (after I adjusted the cup and tighten the tip on the torch). I have it connected to a 20 amp 110 power source and I have to turn it way down or I blow right through my work, granted I am not working on anything of great thickness however it seems like enough for me to learn and practice with which is what I wanted it for. Not 100% sure what the duty cycle is since its not listed in any of the manual or on machine, however I have been treating it as a 20% and its working fine like that no over heat issues.

Unbelievable how powerful it is. Been using it a lot for a year now. No issues

Que no funciona el mig.