G104 100Grams Tube White Thermal Grease Paste, Thermal Compound Heatsink Paste for PC CPU Coolers GPU LED PS4 Chipset Cooling

Heatsink compound works great.. But need a resealable tip..

Good quality and good quantity for good price. I used it to replace dried old heatsink paste in a water distiller, and the unit runs much better now. You cut the applicator top to make the size of bead you want. Generous amount in tube-- I put tape over the end of the cut applicator and put it all in the ziplock bag it came sealed in, to prevent drying out in storage until next time I need to use it.

I work on computers. This thermal grease is very useful for sticking NVME SSDs to their heatsinks and thermal pads to keep the NVME drives cool. Large quantity for the money. One tube doesn't cost very much but if used wisely can be save the longevity of many NVME drives, saving money in the long term. I'm very satisfied with my purchase and am personally recommending it to other people to work on computers with NVME drives.

this tube will last me for years

Works well on lower powered CPUs <65 watts. Was maybe two degrees warmer than my standard Arctic Ceramique. Also, don’t leave the tube in the bathroom. It’s not hand cream…

I had to upgrade the ignition system on my 91 Buick LeSabre. So, i already had bought a large ignition control module, that needed a good thermo paste spread across the bottom of it, to keep it cool and prevent it from overheating. It is hard to find thermo paste at most autoparts store, and if found it may cost a lot for just a little pack. So, i bought this thermo paste through Amazon, and i ordereded a big tube in case i needed more than expected. So far, i am pleased with this thermo paste, and it keeps my ICM cool. The paste draws heat away from the ICM, to keep it cool. I think this paste can keep my ICM cool up to somewhere over 400° Fahrenheit, and thats good enough for me. I still have plenty thermo paste left over, if ever needed again. Just spread a thin layer across the bottom of your ICM, and install it. This thermo paste seems to stay in place pretty good, and it comes with a small spatula and a small screw on nozzle to spread it. Make sure to check inside the package that the thermo paste comes in, because the spatula is clear colored and small, but you will need it. This tube of thermo paste is enough to do many ICM's, and the tube is about 6 inches long by 1-1/4" wide!! Store your unused thermo paste in a cool area and it should last for years, if you ever need it again....Overall, i am pleased with it.

Used it to service the ignition control module heatsink area for a 97 obs silverado v6. Autoparts store only carry small dinky tubes for barely one application. This tube had plenty for several uses and then some.

I've already used this on my son's gaming computer. My rasberry pi (made a huge difference) my laptop and his GPU which he has overlocked. Unless I ran a computer repair shop this tube will last for years. Its high quality material.