GorillaGlides 1 Inch Chair Sliders/Furniture Floor Protectors (16 Furniture Glides) Self-Adhesive Screw On Chair Glides for Sliding on Low-Pile Carpet & Hard Surface Floors, Round

Have used stick on felt based products and they generally do not last long and collect dust and hair. These sliders are simple to install and work great. We recently has LVP flooring installed and felt does not slide at all on it. Seriously, it was more difficult to remove the felt product that we had used than to drill the holes and screw the holders in place and insert the caps. The slide well and do not mark the floor. Now just need to get some more to do the dining room chairs. I do not know if they would stay on if just stick on but it is so easy to screw on I would recommend that

EPIC!! Easy to use! I chose the option of adding the screw for a more permanent solution, and because these were adhered to my student's chairs and are scooted around often on my hardwood floors. These WORK LIKE A CHAMP! Just FYI, I used the stick-on our rocking chair and the bottoms of 2 cabinets which are only moved for cleaning and the sticky is powerful indeed! Works perfectly even on tile that has intentional unevenness. Once Again, Gorilla anything just works. KUDOS!

It used to be easy to find this slide type to find in local stores. Now it seems that only adhesive types are available. This brand and type allow for both an adhesive or nail. Nail is the preferred application. Experience with adhesive types has always resulted in the plastic slide cracking and breaking off and removing the adhesive it not always easy making the next application not as sturdy. The other great feature of this product is the sliding surface can easily be replaced when worn. it is removable and only the removal part is available to purchase resulting in an easier and more cost effective way to replace the sliders due to long term wear. These have been in use on dining chairs for nine months at the time of of this review. The replaceable part has never fell off during use but can still be easily removed for replacement. There is one downside to these sliders that affect giving this a 5 star rating. Although they are the preferred type for application when sliding a chair the chair doesn't drag but does make a vibrating audible sound like a chair without any slider on the chair. Others used but not the adhesive and non-desired types have offered a much quieter slide but more frequent replacement. Although the noise is not ideal the tradeoff for quality, preferred attachment type and ease of replacement still raises the preference in using these slider over other brands/types.

The chair glides went on easily. They seem to help getting the chairs to move over the carpet more easily than they did with the felt ones. There is the screw on option that I did not pursue.

Worked perfectly. Better than any other chair get I've tried. Glides smoothly on my hard floors now.

I first reviewed these Gorilla Glides chair feet in April, two months ago, finding that they just wouldn’t stay stuck to the chair legs, which makes ‘em useless at least to me; but I gave ‘em two stars rating instead of one ‘cause they seemed to glide fairly well over our tile floor considering the coarse, unglazed surface of our tile. You can see that original review following/below. However, now in June 2021, two months later, I’ve tried some other chair feet/glides, of the kind that have an embedded thin nail to hold the feet in place. I supplemented the nail attachment with some Duco cement, and am now fairly optimistic that those feet will stay attached in place. But, even more importantly here, those feet/glides with the nails as I used happen also to have teflon glide surfaces, instead of whatever different plastic foot is on these Gorillas. And wow, those teflon feet glide way, way better on our tile floor than these Gorillas do, despite the coarseness of the floor tile surface. In other words, these Gorilla Glides not only don’t stick to the chair legs, they also glide very poorly on the floor, certainly compared to the teflon glides. And to really rub it in, these Gorillas, which do nothing well, cost more than two times as much as the nail+teflon glides, which seem to do everything well. So again, after all, these Gorilla Glides don’t do anything well. Therefore now hereby demoted from 2 stars to 1 star. —— here below is my original 2-star review of these Gorilla Glides —— —— from 2 months ago, April 2021 —— We wanted feet for our traditional hardwood dining chairs that would allow them to better glide over our unglazed, therefore coarse-surfaced tile floor. And we didn’t want to compromise the wooden chair legs by driving screws or nails up into their ends. We figured these Gorilla glides should be good, especially for the stick-on part of the job, ‘cause Gorilla has such a big rep. in the glue and adhesives business. And they cost twice as much as the competition, which we stupidly fantasized signaled a premium quality product. So we got ‘em. The good news is that they do the gliding part of the job fairly well, not great, but, like I said, our tile floors are coarse-surfaced, intentionally, to prevent people from slipping and falling, so these Gorilla glides might be as good as it gets with respect to gliding on/over the floor. Whether the Gorilla glide surface is reasonably durable or is going to wear down and through with continued use is a separate question - and one to which we will likely never know the answer because ... The bad news is that these Gorilla glides just don’t and won’t stay stuck in place with the adhesive on the bottom/end of the chair leg, even after scrupulously cleaning and prepping the chair leg ends, won’t stay even for a few dinners’ worth of very light use. I keep trying to shove ‘em back to the middle/center of the chair leg, it’s hard work, but they just keep sliding back out of place, clearly gonna’ slide right off as soon as I quit tending them, re-placing (forcefully re-positioning) them every few days. So I hereby give up on trying to make these Gorilla glides work. Not yet certain what I’m gonna’ do instead. I might experiment with other supposedly really good, strong adhesives, see if any of them can keep these Gorilla feet in place on the chair legs. Or maybe I’ll bite the bullet and try some glide feet that use a single very slender, thin nail (plus adhesive) to keep each glide in place. Meanwhile, to these Gorilla glides that only work at all as long as you laboriously re-work ‘em every few days, I give 2 stars. And, I just noticed, Gorilla has just stopped selling their 1.25-inch diameter glide here, the size I bought and want and need. Certainly not that I want them anyway at this point, but they’re really putting the nails in the coffin here.

I thought I got the right kind and I did this time! Yea! I will need to secure them with the screws that come with them. The way I slide my desk around, I knocked the first set off of one side. I don't think I applied them right, but using the second way of attaching the sliders to the desk legs will definitely work. I recommend these sliders to anyone who is looking to help move furniture around without damaging your floors or carpets.

I have purchased this product before with great success every time! Easy installation as well. Their products vary in size to fit most applications as well.

Even though the product appears well made it failed to stick to bottom of our kettle and toaster stumps. Maybe able to use on something elses so not a total waste if $.

These are fantastic ! I ordered these for a new coffee table and liked them so much I ended up ordering 2 more packets for all my chairs and side tables. I previously had ones that were mental with like a felt material topper on my chair legs, but they had a habit of holding dirt and then smearing it across the floor after mopping or whatever, these ones being completely plastic will not retain dirt and are much easier to clean and keep the floor cleaner. To my surprise and delight they also slide allong the flooring better than the ones I had with felt topper on them. I cannot speak for longevity but they feel like they will last a long time and I love the fact that they can be both screwed in and stuck on. Would 100% reccomend.

They work as advertised and easy to assemble.

Used on my new KitchenAid stand mixer, it weighs about 30# and is hard to move with rubber feet. These sliders stuck right on the feet and makes it easy to move the mixer for use and cleaning. Highly recommended.

Great product