Orion Motor Tech Brake Bleeder Kit with Hand Vacuum Pump and Adapters, Brake Bleeding Kit for Brake Fluid Power Steering Fluid More, Vacuum Brake Bleeder Pump with Pressure Gauge

Worked perfectly for bleeding out my squishy rear motorcycle brakes. The whole process only took a few minutes to connect up and begin working, after confirming the brake lines were clear of air I tightened everything back up and they were back to like new.

Worked bleeding a Our four wheel brakes

Worked great fits on any brake, it helped me do around 7 brake flushes on my motorcycles and clients motorcycles too super quick feels like it made out of good material, the value is definitely there, it had been durable, fits on almost any size, the box it comes in his nice and compact.

This kit may not work for you. I used it on a Toyota Rav 4 that is easy to access the brake nipples without raising the car or taking off a wheel. The hose fit good, but the suction wasn't enough compared to just using the brake pedal which I ended up using to do the job. I made sure the rubber ring was installed correctly on the small plastic cup and double checked to make sure I was getting good suction. If you turn the nipple just a little to avoid sucking in bubbles- there is not enough suction to get a good stream of brake fluid moving. If you open the nipple more for more flow- you get a lot of bubbles and you cannot tell if they are coming from the nipple or the brake line. Note that the cup is small and a hassle to empty all the time when you are trying to get rid of old brake fluid. Using the brake pedal to pump was best because I could open up the nipple a lot and the fluid came flying out of the tube so it made it easy to get all the old dark fluid out. I'm going back to my tried and true plastic tube that sits in a tall heavy clear container that won't fall over. Kit looks like good quality for the cheap money but did not work for me. Aloha!

Mine works great. Ensure you have all your seals installed and you have a modern (larger) bleeder valve to press onto. My older bleeder valve (2000 Jeep XJ) was smaller or degraded from rust over the years. With new drums, it maintained a perfect vacuum.

If you’re buying this with the thought that you’ll be able to bleed brakes by yourself, at the corner of the vehicle, with this one amazing tool, I wouldn’t count on it. The vacuum pump functions fine for vacuuming fluid out of the reservoir. Although the capacity of the collection jar is tiny when you’re talking about removing fluid from most vehicles, it does a good job actually creating vacuum and removing the fluid. When it comes to attaching to a bleeder screw and maintaining a vacuum to bleed your lines and calipers, it is not so simple. The plastic bleeder attachments are cheap and flimsy, designed to fit a multitude of vehicles, so the chances that the fit will be snug on your particular bleeder are slim. Some grease or some teflon might help you make a better seal, but by the time you have made that mess, you’re better off using the old school method of submerging a piece of tubing into a Gatorade bottle 1/4 full of clean break fluid and creating your own brake bleeder. Even with some teflon and grease, and using the including wire clamps, I wasn’t able to make a tight enough seal around my bleeder to make any meaningful progress. Keep in mind, I’m bleeding brakes on a Suburban, so large calipers, lots of brake line, a large amount of fluid. It took 10 minutes of pumping and cracking the bleeder to get about an ounce of fluid out of the first caliper, meaning it isn’t worth the time or effort. I wound up aborting, and using the included tubing and a clean 1/2 full bottle of brake fluid to make a poor man’s brake bleeder, and finished the corner I was working on and the other 3 corners in about the same amount of time that I wasted playing with the vacuum pump. Keeping it around, because I can see other uses for it in the future around the garage, like changing power steering fluid or pumping fluid out of a differential or transmission pan without having to remove the entire pan (although I’m going to have to fabricate a much larger catch can for that job, because 6 oz at a time will take all day) but it wasn’t the end all be at all brake bleeder that it is advertised to be.

Cleared out my entire line and put new brake fluid in and made the process much easier

Very nice kit, very useful and convenient for bleeding brakes. Makes job speedy.

Sehr gute Pumpe hält was sie verspricht!

Trabaja muy bien para el precio que tiene, buen producto

Excellente petite pompe qui m'a permis de pouvoir vérifier si ma capsule de wastegate de turbo était encore bien étanche et fonctionnelle. Ca m'a évité un démontage long et un remplacement de pièce coûteux. A la place, j'ai juste eu à changer l'électrovanne du turbo et c'est reparti pleine puissance. Le seul petit point que je dirai négatif c'est qu'il est difficile d'enlever les tuyaux transparents une fois qu'ils sont bien ancrés dans la pompe, j'ai dû découper un bout pour pouvoir enlever le tuyau.

Excellent Item .. Fast Delivery .. Well Packed ..

Got this to do the brake and clutch service on my motorcycle. Worked exactly as expected and made the job much simpler.