Park Tool Unisex Adult PCS-4-2 - Deluxe Home Mechanic Repair Stand with 100-5D Clamp Tool

I knew before I began shopping for a bike stand that I needed a top quality stand as I had just purchased a 60 lb Ebike (Luna Apex). I figured if anyone would know which bike stand would hold up in a challenging job the folks at Luna would know. So I asked them and hands down they recommended this model. Now I know why. This stand is remarkably well designed and the materials, fasteners and all components are top quality. The powder coated finish is well done so the stand is attractive as well. The assembly is straightforward and easy. A couple of 7/16" wrenches (one ratcheting box end wrench and another box end wrench), as well as 1 Allen wrench, were all the tools necessary to put it together. Once it was assembled I put my Cannondale mountain bike on the stand by attaching to the crossbar and then for the big challenge: I connected my Luna Apex Ebike by the seat post. The stand handled both bikes with ease. Very sturdy and stable. I am disappointed in my fellow reviewers for downgrading this stand. Scratched paint? Really? Blame the shipper, blame the vendor but one star for scratches? It is easily 5 stars and then some. It arrived in perfect condition, all the parts were carefully wrapped or boxed, and once assembled is handsome and functions as designed. You get what you pay for. This stand is worth every penny. Highly recommended. The only add-on really needed is the handlebar holder to keep the handlebars from turning.

My old bicycle repair stand was 100% steel but very flimsy, not built for the thicker diameter frames, and it scratched my bikes. I should have purchased the Park Tool PCS-4-2 long ago because this unit saves me time and makes repairs so much easier. I've been using The Park Tool PCS 4-2 for a few weeks and so far, so good. The 100-3D head locks solid and doesn't scratch my bikes. As I was assembling it I noticed the holes drilled into the legs where the pivot bolts attach are a bit close to the edge. Maybe it's going to be an issue over time maybe not. And I think there should be a brace between the legs to keep them from folding up if one leg gets accidentally kicked on a slippery floor. I do think the quick release collar should have been fitted to the main frame tube rather than the extension tube. Every time the bike stand is raised higher the work tray must be readjusted so it isn't too high. Not a big deal but I think if the parts tray were mounted on the main tube it might workout better. I do like that the tray come off quickly and it all stores behind a door in a bedroom. It's a very nice unit and I would recommend it to friends.

This is a heavy duty bike repair stand made of solid tube steel. The legs fold for a smaller footprint for storage. I put a Rad mini 4 on it and it was very sturdy. I could easily position the bike in different angles and heights to work on the brakes. Not cheap, but it will probably be around long after I'm gone!

I was reluctant to spend this much money compared to cheaper stands on Amazon. As of today, this is the only stand that will support up to 100lbs. Assembly was relatively quick considering the stand breaks down into small pieces. The packaging is quite small. This stand does not fold down any shorter. The legs fold but in general it doesn’t get much more compact. That is the downside to this specific stand compared to others Park sells. It’s the price you pay to have a heavy duty floor stand. I was able to work on my bike and replace the rear triangle with ease using this stand. I can rotate the bike in all needed directions no problem. Another reviewer posted that the bolt holes for the leg tubes were a little too close the the edge of the tube. I agree, they could of drilled those holes so that there would be more material around the hole. Good thing is Park had great warranty and I don’t move the stand around much so it won’t be a problem for me.

I was skeptical that this thing would be able to hold a 60+ lb Rad Rover, but it does it with ease. You can even rotate the bike at any angle you need and the mouth/arm holds it tight. There is zero wobble and the stand never feels unstable. The best part, it clamps to a frame of my Rad Rover step-thru and Rad Rover step-thru mini, despite those bikes not having a horizontal bar. The holding arm rotates and it can grab the bike by any part of the frame. Highly recommend, if you are looking to perform maintenance on your e-bike or a very heavy bike of any kind. The stand itself is very light and the assembly took about 10 minutes.

Shop quality clamp. Stand is super sturdy. Paint will chip, but not really that important.

This is a great stand for working on E Bikes to Fat Tire Bikes 🚲 . The clamp system works really well .Very sturdy stand $300.00 range there were some scratches in the lower tubes of the stand “paint chipped” off .Shipped in a quality box and everything was wrapped in factory plastic . Instructions a little vague look it up on YouTube ,Take You’re Time putting it together !!!!Enjoy

Awesome stand. Bought it for fathers day and my dad uses it every day. Very stable. Easy to put together. Getting the tool tray is a must for quick access to tools. And it's light. The only thing I wish were better is the finish. It looks nice, but the paint or powder coat will wear easily.

Excelente!

ich hatte bisher einen montageständer der unter-hundert-euro-liga. ein modell mit robustem gestell und sehr guten rezensionen. für das geld ein guter kauf, keine frage. nur bekommt man unter € 100,00 halt keine ordentlichen schnellspanner zum fixieren des rades in wirklich jeder position, keine kippsicherheit, keine gescheite klemme, und vor allem keine dauerhaltbarkeit. nach 5 jahren war die fixierschraube der klemme abgenudelt und der ständer damit reif für den schrott. jetzt also ein "richtiger". zwischen dem und meinem alten liegen qualitativ welten. er "neue" steht wegen der beinkonstruktion und seines gewichtes absolut sicher. das rad kann auch mit tretlager in augenhöhe absolut sicher in jeder position fixiert werden. die klemme - das entscheidende teil an jedem montageständer - ist supersolide, funktioniert geschmeidig und ist fein und exakt einzustellen. einzig an der lackierung merkt man das "made in usa" - da waren schnell ein paar fahrer drinnen. geschenkt. wer das geld hat und mehr als nur gelegentlich am rad schraubt ist gut beraten, den mehrpreis auszugeben. leider gilt auch für montageständer: wer billig kauft, kauft zwei mal. der park tool-ständer ist mit sicherheit der letzte, den ich mir zulegen werde.

ある程度、足が折りたためしまえるので良い。が思い。またボルトナットがインチなのでミリのものに変えました。しかし何よりカッコいい！

Es un poco caro pero lo merece

Have got two Ebikes to look after and didn’t want to clean and work on them on my knees. This is a very strong and stable stand, a bit OTT for what I needed but I didn’t want to risk it falling over with a bike in the air. Best price on the net too, over a £100.00 cheaper than other sellers.