Lenox Tools - 1772778 LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3 Technology, 1-7/8"

I used this to cut through a 1" thick white oak panel for mounting a power inlet fixture. Tough, hard wood, but the saw had no problem with it. More of a fine cut in oak than a fast cut.Reliable brand for all kinds of sawblades. Most of my bandsaw blades are Lenox as well.Very high quality. No wobble, and the pilot is dead center

Comes complete with arbor.

Cuts a very smooth and clean even on thin soft wood. I use it for cutting sound holes in expensive musical tone-woods.

Woah this thing is SHARP. Fast easy cuts. And for reference, I was able to very snugly fit a 1/5" piece of PVC (inner diameter) through the hole

I have been using the Lenox bi-metal holesaws for a couple decades on everything from high-strength 4140 tubing to cast iron to plastic to wood. They perform very well. Depending on the material and cut, I use some spray coolant or cutting fluid. As long as you run an appropriate RPM and don't overheat the teeth, these hole saws last a long time.

Good quality, does what it is supposed to do.....Lennox is good quality.....

I bought some other tungsten carbide hole saw bcuz it was cheaper and had nothing but a headache with them. Decided to spend a few more bucks and this did the job! Cut out some pipes with an angle using a drill press at a slow rpm and some lube. And still sharp as an eagles claw! Great buy, come with the stem aswell!

I had many different holesaw’s, but not the size, which was needed for the desk, discussions/cord management holes. As typical with this brand, it worked flawlessly. The nice thing about this whole saw is how the extraction of the woods scrap is handled. It comes out very easily and makes removal a breeze. The drill bit is sharp and the whole saw teeth. Did a nice job if not more in the surface and give me the exact size opening that I needed for the court management escutcheon

Took about 3-4 days to arrive , does what it’s supposed to.

It does exactly what it says.

⭐⭐⭐⭐⭐ ممتاز ويجي كامل بالعمودبصراحة أعجبني المنتج، خصوصًا أن منشار الثقب يأتي معه عمود التثبيت (Arbor) بدل ما تشتريه بشكل منفصل.جودة تصنيع منشار الثقب واضحة، وتصميم الـBi-Metal مناسب للشغل على المعادن، والعمود المرفق يوفر عليك تكلفة ووجع شراء قطعة إضافية والتأكد من توافقها.ميزة مهمة جدًا أن المجموعة جاهزة للاستخدام مباشرة، وهذا بالنسبة لي يرفع قيمة المنتج بشكل واضح مقابل السعر.أنصح به، خصوصًا لمن يريد منشار ثقب محترم مع العمود بدون شراء كل قطعة بشكل منفصل.