Rotary Tumbler and Accessories with Media Separator, Cleaning Essentials, For Brass Cleaning, Reloading, and Gunsmithing

These machines work great! It’s expensive but worth every penny! It’s loud but 7L capacity it’s to be expected! Comes with 5LBs of 304 SS Media, 2 FL OZ of liquid cleaning solution. Looks amazing on the bench with my other Frankford equipment! 10/10 highly recommend!

Using for separating brass and pins after wet tumbling. Only time this has not removed 100% of pins from the brass is when I’ve tumbled several different calibers together that can “nest” and trap pins. There is no rubber seal in between the upper and lower case halves, so expect some light water to splash out when tumbling. A lot of the older issues regarding the rubber latch on the rotator Shell appear to have been corrected, mine is easy to operate and holds well. And the mesh on the upper half works great for rinsing both brass and pins when done using.

I purchased this unit for use with brass that I clean in my Frankford Arsenal wet/stainless steel pin media tumbler and I'm very happy with the product. It's built very nicely and works perfectly. The bottom of the unit has a built in screen to prevent the steel pins from being lost as you pour off the liquid and the top of the unit also has a built in screen (in the center of the top) that you can use to flush off the residual cleaning fluid from your brass by placing the brass in the upside down cover and then pouring clean water over the brass. The handle are a press fit into the sides of the brass containment basket and once inserted fit perfectly and snugly. The base has two molded positions for holding the containment basket. One slot enables you to open the basket to pour the cleaning solution, brass and steel pins into the basket and this position keeps the basket open and prevents it from rotating while you pour the water and brass into it. The second position enables the basket to fully turn as you turn the handles. The basket fits nicely into both molded slots. The rubber locking tab that holds the top and bottom of the brass basket closed is a very thick piece of rubber that is very sturdy and keeps the basket securely closed with no chance of it opening while you are spinning your brass. My only complaint about this product is that once you engage the rubber closing tab the top and bottom of the basket are closed very tightly together and it can be a bit difficult to open up again due to the fact that there is no tab or extension to grasp hold of. You have to gently insert either your finger nail or a knife blade between the seem where the top and bottom meet then gently pry it open. Some sort of plastic tab molded onto the top portion to grasp onto would've made opening the basket much easier. It's really not a big deal to me though, it's really just an annoyance. All in all it's a very nice unit and I'm very satisfied with it. It definitely makes processing much easier for the brass that I clean using the wet tumble process.

I’ve been reloading for a while, and this separator has become one of the staple tools in my setup. Its design is straightforward: load your cases and media, turn it by hand, and gravity does the rest. It works just as you’d expect. Separating cases from media quickly and without fuss. What It Does Well: • Effective Media Separation: Handles corn cob, walnut husks, and stainless steel pins without issue. • Works Wet or Dry: I’ve used it both ways. Stainless pins are my go-to for a cleaner finish and less dust. • Simple & Efficient: Load it up, rotate, done. No need to overthink it. Things to Keep in Mind: • Build Quality: One of the plastic brackets that holds the rubber piece broke early on. It still works, but that’s a star off for durability. • Some Sticking: Occasionally, cases or pins get stuck and need to be shaken loose manually. Not a dealbreaker, but worth noting. • Dust Consideration: If you’re using dry media (especially walnut or corn cob), I highly recommend wearing an N100 or similar mask to avoid breathing in fine dust. Bottom Line: It’s not perfect, but for the price and how well it handles the job, it’s a solid addition to any reloader’s bench. With a little care, it’ll serve its purpose for a long time. ⭐️⭐️⭐️⭐️☆ (4/5)

It's a little big, but works great. I stopped using vibrator and walnut shells for cleaning brass and moved to pins and tumbler, which I think works better. This works great to separate the pins from the brass. I consider it a must have. I don't know how well it would separate brass from walnut shells, but I guess it would work.

Works great and fast. I am happy I bought it. I'm getting back into reloading now and this really helps in my case cleaning process. Once you get familiar with it the tumbler is easy to use. I should have bought this years ago. The build quality is fine and should last me forever.

Great value over other brands. Separates media perfectly.

I have recently began reloading ammo. Step #1 is prepare the brass. I am reloading 6.5 Creedmoor ammo. I have a Lyman Turbo 600 Tumbler and have been using that to clean brass in small batches. I didnt have a colander or anything I wanted to use, so I had been digging thru the walnut media with gloved hands, grabbing a piece of brass, then having to hold it against the vibrating stem to get the media inside the rifle brass to come out. Tedious and time consuming. I decided very quickly I wanted a media separator. This looks like it is more designed for wet tumbling, but it is supposed to work for both. I was a little unsure of whether spinning the rifle brass a few times would get the media out from inside the small mouth of the rifle brass. I ordered it up and it came Prime quick. Took about 10 seconds to put together. I tumbled some brass for a few hrs with walnut media and a little Nu Finish polish. Opened the blue ball, removed the bowl from my tumbler and dumped it all in. Closed up the ball and moved it into the right slots on the case, and put the lid on. (The rubber piece to close the ball is tight, but I dont worry at all about it coming open. I just pull one corner out to open it, and push the rubber piece back in place one corner at a time to close it.) I spun it around for 20 seconds or so in both directions. No leaks or media flying out at all. Took the lid off, opened the blue ball, and there sat my super shiny clean brass. I was careful about turning each piece over tapping it to make sure any media inside dumped out, and there was virtually none! I saw maybe 1 or 2 kernels of media over the course of all 20 pieces of the rifle brass. You can see in the pic of the rifle brass the one piece of media in with the brass after tumbling. Worked perfect to remove all of the media from inside the rifle cases. I did some 9mm cases with a wider mouth, and that, as expected, worked even better. Put away the brass, poured the media from the bottom of the separator back into the tumbler and I am ready to clean more brass. Couldnt be happier with how well it worked. I literally dont have a single complaint. It will save me a ton of time, was easy to use, and there was no mess. Couldnt ask for much more! Highly recommended! And from reading the reviews, it works great for wet tumbling if I get into that. But based on how clean and shiny my brass is now, I dont see much need to go that route for now.

El producto llego en tiempo, vale mucho la pena y es muy practico. La verdad muy recomendable este producto y tiene un diseño muy padre

A must for anyone who reloads and cleans their cases! Have reloaded for many years and cleaned cases with dry media and just recently changed to a wet tumbler. This works great for both! My only regret is that I didn’t buy one of these a long time ago!

La separazione degli aghi in acciaio e bossoli è facilitata, ci sono troppe parti in plastica soprattutto la maniglia che svolge ruolo di forza, sperando non ceda nel tempo! Qualche parte in plastica in meno nei punti cruciali e di sforzo sarebbe ottimale!

Saubere Trennung von Hülsen, Wasser und Stahltiften. Auch die Verarbeitung und die Materialqualität sind solide. Bin rundum zufrieden.

Funciona perfectamente para separar vainas de pines, arena o suciedad…lo que utilices para limpiarlas. La única pega…el precio…ya que al fin y al cabo es plástico.