DC62-30312J & DC62-30314K Washer Cold and Hot Side Water Valve Set Replacement for Ken-more Sam-sung Washer 1810145 DC62-30314H AP4204535 by TOMOON

This cold and hot water valve set was exactly what I needed for my Samsung washer! The valves feel solid and well-made, with sturdy metal construction that gives you confidence it’ll last. Installation was straightforward — the threads matched perfectly and everything connected securely with no leaks. The valves operate smoothly and turn easily, which makes hooking up and shutting off the water quick and hassle-free. Since installing them, I’ve had no drips or issues at all, and they’ve made servicing my washer so much easier. Great quality for the price, and a great replacement part that performs exactly as expected. If you need a reliable cold and hot water valve set for your washer, this is a fantastic choice!

In my opinion this is a pretty easy install. From start to finish took about 40 min. Parts matched up exactly except for a minor difference on the mounting bracket but it did not cause any issues as the screw holes matched up exactly. Save yourself some aggravation and remove the valves before trying to remove the attached rubber hoses. After installation I ran a cycle and the washer appears to be using way less water so I think the cold water valve was in malfunction for sometime. In my opinion new valves work great. I enclosed pictures so you can see what you’re getting into. The top of washer is removed

It was fairly easy to replace, to be honest I thought it was gonna be hard, but it wasn't. After I watch a video on YouTube just type in "how to replace DC62-30312...on your particular washer model". The whole process took me at least 45 minutes, but that's because I had a dryer on top and needed help taking it down to access the top panel of washer. Other than that I highly recommend the product, washer it's working as it never had the issue my wife is happy I'm happy.

It worked great saved me lots of money.

These fixed my washer, can"t ask for more than that. There was no issue with the threads not fitting the hoses as stated in some of the reviews.

I bought these in an attempt to solve a problem with my LG washer, which was continuously adding water during the spin cycle and leaving the contents of the washer sopping wet when the cycle was done. Online research led me to suspect the water level sensor or the cold water inlet valve. The prices for OEM replacements for these parts are horrifying, so I decided to try my luck with generic replacement parts on Amazon. The pressure water level sensor was easy to install but did not fix my problem. I did that first, because the inlet valve replacement seemed more involved, and because several reviewers complain that the thread pitch of this aftermarket set is not the same as the OEM valves. I discovered they are right. The pitch is too narrow, or whatever the term is to express that the threads are too close together. I installed them anyway as tight as I could to test the washer, and they leaked. I tried to tighten them more, and they still leaked. In desperation, I put the original valves back on, hoping the problem would be magically solved, but no. I got one last wild hair to try these replacement valves again. This time, I got out every wrench I had, and I tightened the cold water outlet beyond all reason. I mean, NUCLEAR tight, until no amount of torque would turn these things any more. I was sure some part of the valve or the assembly it goes into would snap or break, but miraculously, it didn't. I turned the washer back on and crossed my fingers, and voilà--no leaks, and no extra water added during the spin cycle! However, I'm fairly confident that my extreme over-tightening probably means that I did damage the plastic pipe the valve threads onto. So if this valve fails, I probably used up all the washer's nine lives, and it's adiós LG washer. That's okay, because my wife was all ready to junk the one I fixed anyway.

There is a compatibility issue with an old type of water supply hoses, but if you buy new ones (I bought the most basic from Home Depot), it works great.

Leaving a one star because thread pitch is different from the oem. This is a well known issue according to reviews but still not corrected. Would be nice if they were up front and honest about it and included adapter fittings or at least specified what threads specs are on their fitting. The water hose fitting will screw on and feels tight but could cause a leak if not corrected. Some reviews say it’s 3/4 pipe thread but not sure. Will try to find adapter

Awesome picture and description of the water inlet valves for washing machine. Good price.

These are identical to the oem valves. Neither of my valves seemed to be leaking but was getting OE code even after replacing pressure switch on my samsung front loader. Replaced both valves in less than 10 minutes. Problem solved. Several reviews say that the hose thread on the valve does not fit canadian garden hose thread and an adaptor is needed. Maybe they have changed something as that was not the case. Fit perfect as is and not a leak ( or error code) in sight

Vraiment pas cher et bonne qualité

Worked great for our washing machine

La qualité des pièces semble équivalente à celle des pièces originales. Le temps nous le dira…