Coavas Frosted Glass Window Privacy Film, Static Cling, 11.8" x 78.7"

This static cling frosted film is super easy to put up—no glue, no mess, just spray some soapy water and smooth it on. It blocks prying eyes while letting in plenty of soft light, perfect for my bathroom and bedroom windows. Cuts easily to fit any window, sticks solid but peels off clean when you want. Makes the room feel nicer and more private right away. Great value and it actually works as advertised.

This privacy film worked great for me. I used it on a buffet cabinet that has glass windows in the doors. I wanted to shield everyone from all the things that I store in there. I had a bit of trouble separating the film from the backing. I tried all of the directions and tips. I ended up spraying water on the corner of the film and that helped a lot. It’s kind of like separating a plastic produce bag at the grocery store! Once you figure out what works for you the rest is great. It cut well- went on easily (use lots of water) and seems to stay on nicely so far. I am glad I purchased it! Perfect solution for my needs!

I have applied my share of window films and due to issues experienced with most, wasn’t looking forward to applying this one on a glass exterior door. Surprise, surprise, after throughly dousing the window and the film, I applied it starting at the top and worked out the bubbles as I moved down. No issues, easy to apply and the bubbles came out very easily with a plastic baking tool that looks like a scraper. Trimming it was very easy using a broad bladed scraper held against the inside edge and cutting with a utility knife with a new blade. I applied a frosted film to the window and it now has a classy look. As long as the film doesn’t dry and begin peeling off, I’ll be a happy camper. I like how it subdues the glare on the floor from the sun yet allows plenty of light into the hallway. The last photo I took reveals that at the top, it may be coming lose as it dries. I may contact customer service to get their take on what could be done. I had to deduct 1 star due to this.

I love the way this reflects light. It was easy to put up, though I noticed some of the edges are peeling up! This is more of a cling, not a sticky back! You have to use water to make it stick. Hopefully it stays up with the cold/hot weather here in northeast! Time will tell!

First, let me say that this product is exactly what you think it is. Second, I have yet to install it properly. Learning curve is huge if you have not installed something similar before. By nature, this product is difficult to manage and very strategic to apply but if done correctly, it satisfies very very well. I almost was able to apply successfully by myself and it performed exactly as expected. Just be prepared to waste a few sheets before you are able to apply successfully. Highly recommend a clean obstacle free environment to install and 2 to 3 people to help hold and position the product during intricate application, anything less and you will waste more of the material, just be frustrated, or end up with tons of bubbles and creases. I recommend also sticking one edge while pulling away the opposite edge, then using the pressing tool as an applicator working your way grandually and smoothing from the stuck edge to the pulled away edge until it fully is attached.

I used this product as a recommendation from our cabinet installers. Our cabinets have window cutouts and I wanted the frosted glass, but that is soooo very expensive. I purchased the clear glass and used this film to give each piece of glass the frosted look. It worked perfectly and a simple DIY and inexpensive way to get frosted glass without breaking the Bank! Easy to cut, easy to adhere and stands up to some bathroom humidity.

I purchased several rolls of this in the opacity called Pure. A few factors drove my purchasing decision: THE ABILITY TO GET IT QUICKLY, attractiveness, opacity (I wanted maximum light transfer), and ease of installation. This wasn't the quickest of deliveries, but I didn't have to wait awfully long for it, so that part of the transaction was acceptable. Unfortunately, when it did arrive as two separate orders, one of the rolls delivered to me was white instead of Pure. Irritated as all get out by this for reasons I'll explain in a minute, I referred back to my order, and whoever packed my orders just flat out sent the wrong item in white instead of the correct one in Pure. This is *really bad* because now, my windows now don't match, which just looks like a trashy after thought - and that's an aesthetic that I wasn't going for, so I'm definitely not pleased with that. I would have gone through the insanely inconvenient hassle that is a return on Amazon, except that my #1 reason for ordering this was that the delivery was quick. This was purchased to accommodate a foster dog with reactivity issues who was having a rough time with visuals outside of our house: I needed something fast for his needs, and something matching, with acceptable opacity and light transfer for mine. I was flat out stuck with what was sent to me, as by its delivery time, there just wasn't the luxury or time for a return. I'm still salty about it. To make things worse, the roll of white arrived with creases that penetrated the entire roll, which presents adhesion issues during install and gives you areas afterwards where the film doesn't cling (also displeased with that). Rolls that aren't perfect shouldn't ever leave the factory OR a third-party shipper due to the nature of the product. Lastly, none of my rolls are the lengths stated in the item's description. I measured all of my windows in advance and should have had enough left over for a few more small windows if I needed it; instead, I'm significantly short. All of these things combined means that I now have a large window that had to be "patched", and since my films don't match, it looks like a hot mess. If I'd have received everything in Pure as I'd ordered, this wouldn't be noticeable to anyone but me, but with all the mistakes combined, it makes me bitter every time I look at it. (Patchy windows look bad from both inside and out!) On the positive side, it does cling very nicely. If an area pulls away, just mist the area and squeegee again to remove bubbles. I suggest using a straight edge/T-square and razor blade knife for cutting crisp edges. Have a large area for triple checking your measurements and cutting. The protective film backing sticks a little too well, so be prepared to wrestle with it and become frustrated. You'll get it off eventually, but that was the worst part of putting it up. It repositions easily, so lining up edges and corners isn't a big deal if you find it's going crooked. Large windows require two people or the weight of the film will pull it down if you're trying to put it up alone. While I'm not big on having my windows covered, it's been a really handy solution for my purpose and it would be nice after investing the time to size and cut it all to be able to re-use it in the future, though I have no idea how you'd store it. I do like the way the Pure looks, but would only order again if I could be certain that I'd get the correct product in the actual length stated (this is too expensive to not get exactly what you've paid for!)

We needed a simple non-permanent solution for our sliding glass doors to solve our issue with our dogs barking aggressively anytime we went outside to use our pool which made the pool experience anything but relaxing and enjoyable with constant barking. I still wanted to be able to see outside to monitor my kids in the pool or to see the dogs when they are outside so I only went 60% up the glass door. Ive never applied anything like this before but I measured and cut the film, attached 2 of the stickers to one side of the film to help place it, sprayed the glass generously with soapy water, and situated it into place. My son helped but for my size project, one person can do it alone. I ordered a separate accessory kit with a utility knife, felt squeegee and a few other things inside. The utility knife made it easy to trim off the places I needed to make adjustments. Im very satisfied with the ease of application and how nice this looks on my doors. My dogs are unable to see put now which has helped calm them down some although their other senses- like hearing- have amped up so they still bark some because they cant see us but they hear us outside however it is drastically reduced. I will be using the remnants to do my windows and I will be ordering more to finish my windows and another door.

Excellent it contain adhesive to directly fix to the glass

Great product planning on buying a second one Very easy to use and definitely creates that privacy as mentioned

The product is good but to do a large panel of glass you really need the skills to do it and to cut the size so you don’t mess up the job. unfortunately for us, nope it did not work out. We hired a professional to do the three panels of glass we had and paid less than we paid for these items on Amazon.

Chose this because of the great reviews. But it was a horrible experience. Firstly, I just couldn't separate the film from the sheet at the edge. Gave up after 10 minutes and called the Mrs. with longer nails. It was quite a struggle for her too. When we finally managed to, the protective sheet just couldn't peel off properly, tearing in multiple places after which it was impossible to remove the sheet. Tried 3 times. Had the same problem. In the end, my patience just gave away and I ended up dumping it in the bin. I'm surprised to see so many customers had it so easy. It was a real struggle for me and the Mrs. who tried too after I gave up. She called it quits after the second try. Defective/Fake product?

excelente producto y costo beneficio