NF-F12 iPPC-3000 PWM, Industrielüfter, 4-Pin, 3000 RPM (120mm, Schwarz), black, 120x120x25 mm

Högljudd men bästa fläkten du kan få tag i för den är fokuserad på kyla och det är det viktigtast för mig.

Ich schwöre seit jeher auf Noctua Lüfter, vor allem da diese immer super leise sind, bei relativ gutem Luftdurchsatz. Da ich leider keinen Hobbyraum/-keller habe, und mein Harzdrucker im Eingangsraum steht, musste endlich mal eine ordentliche Absaugung her, die mir die Dämpfe durch einen großen Aktivkohlefilter saugt. Im besten Fall auch den Mist nach draussen befördert. Diese kleinen "Luftfilter" für die Drucker sind weniger effektiv, als ich es mir wünschen würde. Beim Vergleich verschiedenster Rohrfilter habe ich mich dann dazu entschlossen ein DIY Projekt zu bauen. Als Lüfter sollte definitiv wieder ein Noctua zum Einsatz kommen, der am besten ordentlich Power hat, um die Luft aus den Einhausungen, und durch den Aktivkohlefilter mit HEPA Einlagen zu saugen. Also hohe Drehzahl und vor allem eine hohen Luftdurchsatz. Am Ende wurde es der Industrielüfter mit gut 180 Kubikmeter die Stunde. Ich wurde nicht enttäuscht! Der Lüfter hat definitiv genug Leistung für meine Absaugung. Die Lautstärke ist erstaunlich gering, aber natürlich deutlich hörbar. Die ganzen Beschwerden über die Lautstärke kann ich nicht nachvollziehen. Aus der Beschreibung geht eindeutig hervor, dass diese bei etwa 45 Dezibel ist, und auch Noctua warnt in einem Absatz davor, dass es sich hier um einen INDUSTRIE Lüfter handelt, der nicht in Silent PCs eingesetzt werden soll. Der Lüfter ist auf Luftdurchsatz ausgelegt, und nicht auf eine geringe Lautstärke. Vor dem Kauf die Beschreibung zu lesen kann hilfreich sein. Wie lange dieser Lüfter hält? Keine Ahnung. Meine anderen, normalen Noctua Lüfter laufen bisher ohne jede Probleme seit Jahren.

I have built a custom desk that fits my HP Z800 workstation and MSI gaming rig. I decided to have each side of the desk be an intake for each computer. With 4 fans on each side being powered by each PCs PSU. The Z800 with how many fans that thing has on its own it probably doesn't even need that many but lemme tell you a few things. This desk is 79.75" long. And 26" wide. That's alot of area that needs some form of airflow through it. Now on the left side is all 4 noctua indistrial 3000rpm 12v fans. The right side has 6 corsair HD120s (3 for the rad and 3 for the intake) and one noctia industrial as well. Now the corsair are some decent fans. Quiet and move a decent amount of air. I'm not very good at math but they do a pretty good job for how expensive they are. Now I heard noctua makes great fans. Alot of youtubers use them, some friends of mine use them, and it seems anyone who's anyone uses them. When I was doing testing on the computers I was EXTREMELY impressed that the noctua industrial I've purchased actuslly can move air more then 3/4ths the length of the desk. It blows the corsairs out of the water. My fan controllers are their own devices that run off the sata power cable. They weren't cheap at $67 a pop but their great quality, what I'm getting at is as the fan controller starts up their LOUD BUT once the proper RPM kicks in you can't even hear it. 3000rpm is alot and at 1200 even 1500 I legitimately dont even notice it. The corsair fans yeah I can hear them but these fans are excellent all around on efficiency. For pretty much making a blind choice of fans to buy I made a great choice. Their build quality is impressive too. They are also quite responsive too when it comes to an rpm spike or going from an idle speed to max it kicks up to where it needs to be very quickly. I honestly think any build i do from now on will use these fans now that I've actually seen the light of how great these are. Now if they coild make a delta style fan where it's got dual props on it that's as insanely powerful as those id buy them in a heart beat over deltas server fans as the noise reduction would likely be amazing.

After having read positive reviews on Noctua's fans I decided to replace one of the stock fans on my AIO Corsair H75 with the NF-F12 PPC-3000. The order was placed on the 22nd and despite having selected standard shipping, the item arrived a few days early. What can I say about Noctua that hasn't already been said before by others. The quality is evident in the weight and the materials employed. At no point while handling the fan does the word "cheap" come to mind. I have to say that it is noisy but I knew this when I ordered it. Since my computer is dedicated to very CPU intensive tasks, I wanted maximum airflow through the cooler's radiator. This fan does not disappoint. It moves a lot of air. At full power it sounds like a very small jet idling on the tarmac. This doesn't bother me as it only runs at full power when I need it to. At other times it runs at a medium setting and the sound is fine. If you want a quieter fan though then I would suggest the 2000rpm model. At maximum power settings it has managed to decrease my CPU temps by about 5 degrees at idle and peak by about 9 degrees. I am pleased that Noctua has decided to introduce a black version, as I think some of the more aesthetically sensitive are turned off by the standard Tan/Brown version. Hats off to Noctua with a great product. I will be replacing the fans on some of my older computers with offerings from Noctua from now on.

Die dingen trekken mijn PC ijskoud!