Bike Rack – Dual Bicycle Stand for Mountain, Road, or Kid’s Bikes – Indoor or Outdoor Steel Bicycle Storage – Tire Rack for Truck by RAD Cycle

As with many of these foreign made products, the assembly directions were unclear and incorrect - total garbage. However, if you have some experience assembling these kinds of things it was fairly easy to figure out. You just need to get the main parts in the correct orientation and my advice is to tighten all screws by hand only and then once you've verified that the entire assembly is put together correctly, you can use the provided hex tool to tighten up all the screws. At first, I thought that the individual components felt a little cheap and flimsy. However, once the entire stand is assembled and all the screws are tightened up, it's rock solid. We use it to store two eMountain Bikes that each weigh over 50 lbs. and it works out perfectly. We simply store one bike with the front wheel in the stand and the other bike with the rear wheel in the stand so that the handlebars are staggered and don't conflict with each other. I am very pleasantly surprised by how effective this stand is for the price point, hence my 5-star review despite the poor assembly directions.

Very sturdy, heavy-duty bike stand. Easy to assemble. Appears to be high quality and scratch-resistant. BIkesmount into stand easily. Completely satisfied with purchase.

I just received this yesterday and have assembled it so it has not gotten a lot of use yet, but I wanted to note my comments about the assembly while I still remembered. When assembled, the stand seems sturdy and I am happy with it. But the assembly instructions leave much to be desired. I consider myself handy, and had to reassemble a couple of items, so I thought I would give more advice on the assembly here.First in my package, there were no short and long screws, like were mentioned in the instructions. (They are actually bolts not screws.) There were only one length of bolt for the smaller size. I believe that this must have been changed after the instructions were written. The bolts I received worked fine.For steps 1 and 2: When attaching any of the pieces to the larger base rods (B) make sure that the holes in the center of the base rods (B) end up horizontal when the rack is assembled. If not, the left and right side of the base rod (B) needs to flip and then it will. If you do not do this, then the square cross strut (A) will not connect to the rack correctly.For step 2: When inserting the wheel stanchions (C), make sure that the holes halfway up the stanchions are oriented towards the center of the bike rack so that the cross brace (E) can be attached.For step 5: When tightening all of the bolts, tighten all all of the bolts that connect to the base rods (B) first and then place the rack on a level floor and tighten the remaining bolts.I did get a few scratches in the paint where I tightened the bolts. I believe that if you use a socket rather than a wrench, this will not happen. The bolts are all metric.I hope that these additional instructions help. If I had had these extra instructions with the rack, I would have given it 5 stars.

Works perfectly for our bikes! We store them in a machine shed with a gravel floor and they are forever falling over. The kickstands don't work in loose gravel. In less than a half hour, I had this stand assembled and our bikes with the wider tires fit in nicely. It might have been a little less tight fit if I had arranged the stands opposite each other (it's made as an option), but I wanted them side-by-side, and it did work. It's small enough to toss in the back of an SUV for when we go camping, so we might just do that next time! It holds 2 adult bikes easily. Easy to assemble, easy to use, and versatile as far as options for how you want the bikes to stand.As far as quality and value goes, I think I definitely got my money's worth; it's not heavy-duty steel, but I think it will hold up for what we need it for.I can't believe we haven't done this sooner, back in the day when our kids were still at home and we had multiple bicycles that were always falling over in that gravel. But our kids are grown and gone, and it's just my husband and I, and we are getting back into bike riding, so this works out nicely for us.

Great floor bike rack. Relatively easy to install, instructions are mostly clear, diagrams/pictures could be clearer in a couple areas. One suggestion, which they even mention - only loosely install all the fasteners as you go. This allows some parts to go together since design tolerances of the assembly are pretty tight. AFTER everything is together, then tighten all the screws/fasteners. Some are complaining that this item does not assemble together properly - they did not loosely assemble first, then tighten everything together after everything was assembled. The stand is VERY sturdy. It easily holds my sons two 26in/size medium mountain bikes. I have a 27.5 mountain bike and it holds it too. It looks like it could hole a 29in mountain bike too, but not much of the wheel would be locked in place. You can assemble it to where two bikes are side-by-side, but if you have wider handle bars like most mountain bikes have, the handlebars/grips will pretty much be on top of each other, making removing one of the bikes slightly difficult. That's the only real minor issue I have on this item, otherwise it is great. You can assemble the item to where the two bikes are NOT side-by-side, rather both bikes are in line, but that takes up more space. It has plastic/rubber on the bottom so it does not slip around on the garage floor that much. Overall it is a great value, very well made and sturdy.

I recently assembled this bike rack system, and while the assembly process was quite tedious, it was definitely worth it. The instructions were clear, so it wasn’t difficult, just time-consuming. For our setup, we had to place a rear wheel of one bike into the rack and a front wheel of another bike to avoid the handlebars touching. Alternatively, you can position both bikes with their front wheels facing each other. I appreciate this rack because it conserves a lot of space in my garage, which is especially helpful given how much room kickstands can take up. The bikes are very secure and will not fall out, and the overall build quality is excellent. Highly recommend it for anyone looking to save space and keep their bikes secure.

The connecting points between the main hoop and supports about a third of the way down the main hoop are so misaligned that the bolts will barely go in without stripping. Very poor engineering. Disc brakes hit the hoops as well. Just a bad design all the way around. Returned as defective.

We ordered this rack to keep our bikes from falling into each other or into our vehicles. The rack keeps the bikes upright and in place and works exactly as we had hoped. It was super easy to assemble. Highly recommend.

Bolts did not connect to frame, faulty, had to send back

Cuando se arma si hay que dejar los tornillos flojitos, pero la verdad producto muy bien hecho. Un poco mas grande de lo que esperaba pero perfecto para dos bicis de adultos

Easy to assemble and does the job well

Great and very affordable bike rack compared to the competition. This is a buy it for life kind of item since it is very sturdy and well built, and I don't see it needing to be replaced for many years to come. Fits mountain and hybrid bike wheels, both front and back.Not much else to say, if you're in the market for a ground bike rack, look no further. Would recommend to anyone.

Absolutely fine for holding two regular bikes. Can be screwed to the floor if needed but you'd need to use washers to stop the metal bending. Overall a solid and inexpensive choice that works well.