Nilight NI04-200W 1PC LED 41inch 200W Spot Flood Combo Single Row 19000LM Off Road 3D Fog Driving Roof Bumper Light Bars for Jeep Ford Trucks Boat, Black

Light bar is great! It puts out plenty of light. I bought the Nilight switch and wiring kit as well. No issues, even after getting hit multiple times while on rides by limbs and sticks.

I bought this light bar to fit into the hood bulge of my 2017 Toyota Tundra. It's a nearly perfect fit, you'll need to do some modifications to the bulge though. The light bar is bright and suits my needs perfectly. When you wire it up, you'll want a 20 amp fuse. I used the Nilight fused relays to wire up to my 4 gang switch. An installation tip. Place your vehicle on a level surface, get a small 3 bubble level, and make sure that you've got the bar at the level / angle that you want / need. If your mounting and want it centered, use a tape measure to find the center of your location and the center of your bar. Mark both and you should have a nice, clean professional looking installation.

Super easy to mount , although my roof rack came with mounts. I added a water roof make connector to the light pigtail, then the female side to the included switch. Overall the light is great quality, plenty bright, and a fraction of the cost of other light bars.

Hell yes you can see into the future with this bad boy! I hid it in my hood on my tundra, works like a charm and great at night or if you need a slow car to move out of the fast lane.

What's to like: Slim profile => nice; Surprisingly bright => nice; Seems well constructed overall => nice... What's to dis-like: The threads on the end caps (mounting points) look like they are part of the casting and not drilled and tapped after-the-fact. As such, they were oversized and the supplied bolts easily pulled out by tearing the top third of the threads out - effectively stripping out completely even before getting tight. I drilled them out on both ends and then tapped in for an 8mm x 1.5p bolt. The aluminum alloy caps held up well to this and the new bolts threaded in and tightened up nicely. Overall a 4 because it is solidly built and a nice, bright lightbar - once you get past the manufacturing defect on the end caps.

I added this 41” Light to a 2022 Yamaha Wolverine X2 on the roof. It was only around $90 and a single row but don’t let the streamlined low profile appearance fool you. I have 2 other ATVs with light bars, a Toyota FJ and Ford Raptor and this bar is either up there or better than my others that I paid $300-600 for. This thing is easy to install as I had custom brackets already mounted and a preinstalled wiring harness. (Get a good harness with higher wattage specs). After sunset the day it was installed , I took out the SXS out on some logging roads with standing trees around. I flipped the switch on and when I say it was daylight, I truly can’t say it is an exaggeration. It appears to have the perfect balance of flood and spot diffusion at 19000 lumens(second photo has light “on” at mid day. For this price I am very pleased. I don’t know how durable it is, but the video on the product showed some extreme testing. I don’t recommend pressure washing Lightbars (ever), so just hand wash to avoid creating a moisture problem. Initial review on use and ease of installation is “excellent and simple”. The power wire is thick, stiff and significant for a lightbar at this price point not cheap and flimsy with some shrink tubing such as others I have seen. If this one lasts only a year and I have to purchase a new one every year for 4 years, it will still be cheaper than the Rig1d$ LED’s that I have on other vehicles with the same (or possibly lesser) light out put. Update on measurements: I have gotten several questions on the actual size of the light bar. Down Mounting hole to mounting hole(no brackets attached) width is 40-1/2” Height is 1-11/16” (see photo)

Seems very bright, have not been on the trails yet.We will see how it holds up in the desert and mountains of AZ. Installed on a 2021 Honda Talon with very little modifications. Update almost 1 year later and a whole season riding. Have been impressed by the quality! Used loctite during install, works perfect and very very bright!!

Of course installation is all dependent on where you will be mounting this. Many Tundra boys like to slot this into the hood bulge, which is tight, and the provided l bracket is fixed and does not allow for any up and down adjustment, just tilt. Shorter or adjustable brackets would be nice. Also, even when tightened, the unit can tilt. However, this thing is very bright! It will easily blind people in the opposing lane in the daytime, and in the evening is downright dangerous if approaching other traffic. Great for flashing idiots that cut you off, or someone that believes your headlights are on hi-beams. Overall, I recommend this if it fits your application.

Allo ! il est super génial le bar led il éclaire très bien mais les leds sont bruler même pas un an d'utilisation. je suis déçu en espérant que la compagnie fait de quoi.

Best led bar ever perfect fit on Toyota Tundra 2016

Great light but you get a glare off your hood. Might have to tilt it up.

Likely going to have to return this.... Nilight built the light with cogged ends so that you can set the angle of the light. However, they only include flat mounting brackets, so there's nothing but the pressure of a single bolt on each side to prevent the angle of throw from gradually lowering as you're driving. Obviously this can be fixed with a good epoxy or silicone, but all the other branda of lught bars on my friends machines include cogged backets that mesh with the ones on the light bar. Can't comment on brightness etc yet as it just arrived and I have yet to install it. I'm simply dismayed at the manufacturing oversight that renders anything else a moot point. The above still stands, but uograded from 2 to 4 star because it truly is a beautiful light. Looks fantastic on the machine, and with the addition of silicone it seems to be holding. The single row of LEDs is just avout as bright as my friends 2 and 3 row LED versions, this one just looks sleeker and nicer hands dowb. Once the manufacture eventually updates brackets to match the cogged ends of light bars, will definitely make for a 5 star item.

Lights up the world