Dual Monitor Desk Mount Stand with Height Adjustment and VESA Plates for 2 LCD Ultrawide Screens up to 34 inches, Stacked Array, STAND-V002R

I bought this to vertically stack two ultrawide monitors and it’s been a big upgrade for desk space and ergonomics. The build feels genuinely heavy-duty, and once everything is tightened down it holds the monitors securely without that “wobble” you sometimes get with taller stands. It supports up to 49" ultrawides and 44 lbs per screen, and the included VESA 75x75 / 100x100 compatibility made it straightforward with my displays.Adjustability is solid: there’s plenty of tilt (+85° to -25°), swivel (160°), and 360° rotation, plus height adjustment along the center pole for dialing in the perfect stacked alignment. Cable clips on the pole help keep things looking clean, and the detachable VESA plates are a nice touch that makes mounting less stressful.What I likedVery sturdy, confidence-inspiring for large/heavy monitorsGreat range of tilt/swivel/rotation and height adjustmentClean look with built-in cable managementClamp mount is strong; grommet option is included if you prefer thatWhat to know before buyingWith big ultrawides, setup is easier with two people (positioning + tightening everything evenly).You’ll want a sturdy desk and to double-check desk thickness for the clamp/grommet limits (C-clamp up to 3.3", grommet up to 1.9").Like most heavy stands, you may need to re-tighten after the first day or two as everything “settles.”Overall, if you want a stable vertical stacked ultrawide setup and don’t want a wall mount, this is an excellent option. I’d give it 5 stars if the initial alignment process were a little less fiddly with very large screens, but once it’s set, it’s fantastic.

I wanted something to mount a 49" Samsung G93SC monitor, with the ability to mount a second monitor up top later on. I really just hated the large stand the 49" came with. I was nervous about mounting it so I went with something rated for larger/heavier monitors. This fit all my needs perfectly.I had a smaller desk at first, hence wanting to mount the monitor, and using the clamp on the back of the desk I had no fears this couldn't hold my monitor up. I also was able to leave the top piece off so it didn't look like I was missing a monitor, which is nice because it easily screwed in when I was ready.I upgraded to a larger desk and had to drill a hole to use the grommet feature instead. This was insanely easy to do (I've never done that with any mounts before) and honestly feels even more stable than the clamping.Extremely easy to mount the monitors onto this as well. I mounted the monitors with the tilt aiming down so I could adjust it up as needed, since it locks and you have to loosen the screws to tilt down.Currently I have a 49" and a 34" monitor mounted on this, and I have no fear of them going anywhere.

This stand is sturdy, sleek, and easy to install. I bought two and they worked well with all my monitor manufacturers (LG, Acer, and Asus). I definitely recommend it for anyone who has multiple monitors, needs to save desk space, and wants to improve their workplace ergonomics.

The following is an update to my original one star review:So Vivo customer service is great. Really great. They no hassle sent me my replacement part for free which was really nice. I wanted to give five stars if they did this despite the fact they shouldn't have had to, however the new base was really hard to screw into. I had massive pliers and a massive wrench I used to torque the pole into the base, and as I did I saw the paint from on the threads peel out like peeling an apple. Oh well. I electrical taped over the ugly marks I made with my tools and I now have a working mount. Much later than I originally planned. I'm giving them four stars because besides the obvious, I really like this product, and the customer support is fantastic. Read my review and decide for yourself of this is for you.Original Review:I wanted to give this five stars so bad, but I'm having an issue that several others have mentioned on these reviews (to varrying extents). The main threaded pole that goes into the C-clamp base does not thread properly. The clamp side threading has the first catch thread smooshed against the second- basically the first thread is too thin and doesn't allow the pole to catch. I immidiately sent an email to customer support in case I could get some sort of information. I ended up trying to take two massive pliers to force it past the crap thread and maybe get it to at least to the point where I can get some set screws in, but it didn't work. Even protecting the pole from the jaws of my pliers, I only ended up damaging the pole a bit. As I type this, the pole is stuck in the mount, but only barely. It doesn't even begin to show through the set screw holes. I wouldn't trust both my monitors on a couple mm of "threading", would you?And that's why I can't give this more than one star AT THIS TIME. It has one thing it is supposed to do: mount two monitors safely. Currently, it does not do this.I love the design and materials. I put it all together just to see what it looks like without mounting my monitors, and it's pretty cool and perfect for what I need. I just don't feel confident at all in the tiny hold the base of this thing has right now.My hope is that VIVO will do the right thing by me so that I can change this to a better rating.

Perfect monitor stand! I have 2 34 inch curved monitors and this made my set up so much better!

This Is one awesome Dual Monitor Mount. It is built very sturdy with 2 sections of pipe, a threaded coupler and then threaded again to a very solid base. The base clamp is well constructed and will allow you to tighten it securely without the fear of if flexing or bending. There is another alternate base mount included to allow for mounting screws directly into a desktop. My desk has a solid back and did not allow for the clamp to wrap around the back edge of the desk. I opted to remove the lower half of the existing clamping device pictured here and drilled 4 holes in my desk that matched the existing mounting holes in the clamp.This allowed me to bolt the Dual Mount base directly to the desk with 1 x 3/8" bolt through the top of the desk and 3 x 1/4" bolts from the back side. This well built mount will support a lot more weight than advertised. The appearance is very nice even though you don't really see it once you mount your monitors. The cable management clips work well and they even have storage slots for the Allen wrenches that came with the Dual Mount so you will always have the tools readily available should you need to adjust or disassemble the mount. You can tilt each monitor side to side or up and down by loosening the Vesa mounts with the provided wrenches. I added a few photos to show that 34" monitors mount to this dual mount with no trouble at all. You may need help getting things in place, but it is very doable. If you are looking to stack a pair of large monitors then this is the mount! "Bravo Vivo"! Excellent Product. Just a brief update! I have recently moved and had to disassemble everything. I liked the original mount that I purchased so much that I decided to expand my studio I added two more monitors. One monitor is a 34 inch like the first two, but I wanted it mounted vertical. This is so I could manage the rack within my digital audio workstation software. Again this Vivo mount performed flawlessly. It allowed for the large monitor to be mounted vertically with ease. These mounts are plenty strong to hold 34” monitors in place.

There is nothing that I hate more than assembling stuff, but this company's video instructions on YouTube made this completely painless and I was up and running in under 30 minutes. This stand is heavy duty and EASILY supports the two 34 inch monitors I have attached to it. I've had it set up for about a month and with only the included tools, it hasn't budged/sagged/etc. I wanted to make an adjustment to my upper monitor after using it for a few hours and it was pretty easy to do.Build quality seems high and it even comes with with some pads to put between the clamp (if you choose that installation method like I did) so it doesn't damage your desk when you clamp it on. Also included were Allen wrenches (three different sizes) and bolts/washers/etc. The included cable management clamps are a nice touch and have out-of-sight holders for the Allen wrenches so you can store them right on the monitor stand and don't have to worry about searching for them later. What a totally awesome idea.Giving this product 5 stars for everything - great quality, ease of assembly, thorough and easy to follow YouTube instructions for those of you like me that hate reading instructions. Totally recommended.

Works perfectly for stacking my MSI 491CQP QD-OLED (bottom monitor) and Gigabyte Aorus CO49DQ (top monitor). These monitors have different mount points which makes them have the small gap as seen in the video/photos that allows me to hide the bezel. This gap is also super helpful for setting up the monitor mount as the mount is finicky for fine tuning small vertical movements. Normally the movements will be larger than intended, which if your monitors had the same mount point would cause them to bang into each other if you tried getting them close... Not an issue for me using these two monitors though.So why 5 star if this issue exists? Simple I was able to get it set up without issue with my monitor setup, there's tons of additional vertical space to mount the monitors higher if one desires (my MSI monitor is already higher than the stock mount that comes with the MSI monitor allows in my setup and as you can see there's still almost 4 inches higher the setup can go. For reference the bottom bezel of my MSI monitor is at 5.25 inches off the table. Aside from this, given this monitor stand has no arms, it is absolutely perfect for vertical stacking of the monitors. So much less effort to get the setup perfectly lined up. Not to mention the price is leagues better than the versions available with arms. Feels very stout/solid. I'm fully satisfied.

Excelente material e produto

Took awhile to receive. Well packaged. the tiny screws did fell off when it came.The user guide is not that easy to read with all the small graphics, but its quite easy to setup even without it.

No es un tubo, se trata de dos piezas FUNDIDAS, lo cual le da una estructura firme y muy fuerte. Eso me sorprendio. El costo mas barato que otras opciones, facil de instalar y trae una seruie de detalles que le dan un acabado de lujo. Comprare otro solo para la laptop.

Its heavy duty.. its great too.. but i was hoping the top monitor could tilt a little more.

Mine arrived neatly packed but had a hard time connecting the 2 metal rods to form a single holder. fairly disappointed but well if from online so yep.