Black Dual Motor Electric Standing Desk Frame, DESK-E-200B

VIVO really is one of those brands that is a no-brainer to order from. They're a prominent part of my setup, from my monitor arms, to my desk. This dual motor frame is perfectly sturdy, and no shakes, even on carpet. It feels so much smoother compared to single motors, especially from other brands. The legs feel heavy and durable, and my desk raises and lowers without any squeaks or instability. This install was super easy in comparison to other standing desks I've had in the past, aside from actually mounting the desk (which is a one time problem), due to the heaviness of the desk. However, I am sure if I had a bigger room to work with, this would've been negligible. I fully endorse this product.

This is my second VIVO desk frame. I got this one because it goes lower and I could then put my wheels on the bottom without raising the sitting height of the desk too much. It is very easy to put together and has great quality for the price. The white version looks fairly decent, and with a nice looking table top, you won't win any design awards, but at least it's not fugly.

Fit perfectly on my Ikea 2'x4' desk top (like $30 -- solid option for a cheap table top). Very sturdy and the height adjustments are very smooth. Holds up my lg ergo monitor and there was enough space underneath to mount my 14" macbook, a cable management tray, and an audio interface. Wish I would have gotten this a long time ago. My back already feels much better being able to stand

Really nice legs. I feel like they are very solid. I’m 6’ 3” so my standing height for this desk is 45” and it seems very stable. Does the desk shake, yes. It’s 45” up in the air, it’s gonna shake. But it’s very minimal. Others here had me convinced it’d be dang near collapsing from shaking and wobbling so bad. I even put a larger desk top than is recommended, (96” x 24” x 1-1/8”) and it’s working great. Only “issue” I had is the programming. Manual says to push and hold “S” until it the LCD flashes. You press “S” for 1 second and let go, then the LCD flashes “S -“ and it’s ready for setting 1,2, or 3. Assembly was easy. About 15 minutes. Good hardware, everything was threaded nice. I was able to tighten everything very tight, with a 5mm T Handle even, and nothing stripped. Haven’t had it up very long yet, but so far I am happy with it.

Excellent product and customer service. Bought this to throw a butcher block on. The legs are quiet and sturdy with this block on it. Little to no wiggle. The instructions were east and straight forward just make sure to read them before and make sure your tabletop isn't too large. Mine was, but Vivo was great and I was able to get a single extension cable within 3 days. For the money, I don't see any options that beats this one.

This is a sturdy and stable desk frame. I much prefer it to Ikea's I... or B... desk frames because it goes lower, has memory position pre-sets, is cheaper, and is very sturdy [so far (after a couple weeks)... if it starts to wobble I will update this review)]. Holes are properly drilled and tapped, parts are 100% complete, everything works, fit and finish is lovely, it arrived nicely packed in a well padded box and everything was ready to assemble. It all looked so misleadingly easy. Pictures in the assembly instructions are pretty, but improperly sequenced, steps are omitted and mixed up. It is not possible to properly assemble this frame and attach a desktop by following the instructions that come in the box, and it is not possible to properly assemble this frame and attach a desktop by following the (different) instructions that are available on the website. The only way to properly assemble this frame and attach a desktop is to lay out all the parts the night before and make a plan, get a good night's sleep, dry assemble everything the next morning and revise the plan, and then, around lunchtime, assemble everything carefully following your doubly revised plan. At least, that is what I did. Hopefully, my desktop with its new frame will last a long time.

Attached this to a large table top to create a stand up desk for my home office. It was easy to install and works great!

I like to live with a product for a while before I review it, especially things that are a bit more complex. I've had this set of legs built into a desk for several months now, and I love them. I was impressed at the build quality, and I am really very picky about such things. Everything was solid, heavy-gauge metal, with quality joints. Despite what a few reviewers here said, I had no problem with screws aligning with their holes. I even took apart the motor compartments to check the innards, and they are rather robust with a good quality grease. The electronics box is also well-made and safely designed. I ended up making a table top out of three of the cheapest pine 1x8 boards from Home Depot, biscuit-joined at the edges, routed to break the corners, aged with an iron acetate solution, and varnished. For what I considered to be a quick and temporary top, it turned out gorgeous! But enough about the wood, how about the legs? Well, they are fantastic. The control panel is a bit un-intuitive, so read the manual. It's not hard, just non-obvious. The panel itself is made of plastic, and possibly at risk of breaking if you crank the screws down hard or ram into it with a chair arm, so mount it carefully. I put a couple thin rubber pads between the plastic and the desktop to give it a little resiliency. Also, I did not use the rubber pads between the leg unit and the desk surface. I think there should be a few more of them, and in the end I couldn't figure out a good reason to bother with em, so I screwed it directly to the legs. I've had no problems at all with it. Perhaps they are meant to reduce conducted sound and make the thing quieter? It's not loud, anyhow. Be sure the area is clear when you raise and lower the desk, so it doesn't crash into something. Also note, that the control box has a bit of a magnetic field to it, probably from the transformers inside. I only noticed this when having a quadcopter drone on the desk, and it would throw compass magnetic interference errors. It causes no problems otherwise. There have been two occasions where the control panel locked up, and necessitated me unplugging and reconnecting the power to the desk. I don't fault the desk for this, as sometimes electronics just get jinky, and it's been rare and easily cured. I can heartily recommend these legs, and I wish I had done this sooner! All future work surfaces and desks in my life will be height-adjustable - it is so amazingly convenient!

Best Purchase. Very sturdy. Have used with 43” monitor and its solid for both sit and stand. Little bit wobbly when its all the way up, but I wont be needing it that high. Its quiet to operate as well.

Reçu rapidement , avec un montage très facile A l'utilisation c'est parfait Seul regret ne descend pas assez bas pour moi (70cm)

I am very happy with this purchase. The frame is solid and seems to be good quality, but isn't insanely heavy. Assembly was easy. Raising and lowering is very smooth and makes a pleasant sound.

I am really happy with this. Arrived well packaged with clear instructions. It was easy to assemble with spares for screws and bolts which is appreciated. It works well and looks good. The motors are quiet but seem powerful. It handles my oak desk top comfortably. Excellent value for money compared to competitors but still feels premium like it will last for ever.

Super Preis/Leistungsverhältnis