Scosche TA02BCB Compatible with Select 1984-17 Toyota Power/Speaker Connectors/Wire Harness for Aftermarket Stereo Installation with Color Coded Wires and Pre-installed Wire Connectors

Tambien es compatible con toyota avanza en mexico... Facil de instalar.

My 1994 Camry had a factory cassette/CD player when I bought it last year. I was afraid to put a cassette into a stereo that old, and the CD player worked but hey, only 1 CD at a time.There are some pretty nice car audio systems available and I got a cheap one that handles bluetooth on the phone, SD cards, USB sticks, etc. The installation was a walk in the park! I popped off the bezel, removed four screws, and the old system was out. The new one had wires hanging out and the colors on this harness matched perfectly. It took about ten minutes to crimp those wires and then the two connectors plugged right in where the factory unit was. I plugged in the antenna and screwed in the four screws, then did a smoke test before putting the bezel back on. No smoke, just music :)It doesn't get much easier than this. If I ever decide to get a fancier stereo later, you can be sure I'll be back for another one of the harnesses.

I attached it to the harness that came with my new headpiece. All wire colors matched. The attached connectors made it easier.My new stereo works perfectly.

Worked perfectly for a 2009 Yaris. Saved me from mangling my factory harness.

I recently replaced the stock head unit in a 2012 Toyota Sienna LE with a Power Acoustik CPAA-70M double DIN receiver. The wire colors on the Power Acoustik unit agree with those in this wire harness. This combined with the butt connectors made installation quick and easy. The Sienna did not have the upgraded audio system with the JBL amplifier. Note that his wire harness kit does not include a kit for the Sienna's steering wheel controls, but it was easy enough to find a wiring diagram and make small splices into those wires.The SWC wires on this Sienna were in the 20-pin harness that must be unplugged from the stock head unit during removal. There were three wires grouped consecutively along the top row, left side if looking at the plug from the rear, where the cables enter the adapter. SW1 was black (B), SW2 was light green (LG), and SWG was sky blue (SB). SW1 handles the seek and volume buttons while SW2 handles the rest.