VCELINK Pass Through RJ45 Crimper for Cat5/Cat6/Cat7 End & RJ11/12 Plug

Very good for crimping. Watch what rj45 jacks you use with it. Does not work with all jacks

Got this and crimped away with some cat6a cables and shielded RJ45s. Worked a treat to begin with. When I moved over to Cat6 (23 AWG) cable, I could not get it to crimp all the terminations. Re-crimping then brought some back and others, that were ok before, then failed. All in all, this device seems more suited to the bigger stuff, but the manufacturer states that cat6 should be fine. I had every plug fail when using a Fluke tester. Its very well priced, but expect issues at times which can be very frustrating. PS I was also using VCELink RJ45s. I have wasted a load of these plugs, and they are not cheap. December update: The manufacturer contacted me regards me issue. They obviously care about their product which is great. They advised I use a different RJ45 connector. I tried what they advise and it works great. Brilliant communications from this company. More of the bigger companies should follow suit. Buy with confidence.

This tool is a must for anyone who wants a professional finish. Works every time without fail on cat5 and cat7 cables. I like the cable cutter when using pass through connectors. Recommended.

Does exactly what an RJ45 crim should do. The push-through cutter works perfectly with solid core cat 6a. Blades are sharp, and it strips well. The crimp for extended ground also works well. I used these with VCELink Pushthrough RJ45s for cat 6a/cat 7 and they were perfect.

Very easy to use does the job perfectly

good stuff

Having been using the "old school" crimps for a while, someone invited me to try the passthrough connectors. And I haven't looked back! In terms of this tool, yes, there are better ones out there. But for the money, this is bang on!

These look the part but that is where it ends. They do not cleanly cut off the wire ends and leave strands jammed down the side of the blade. Some ends of the wires are left slightly protruding from the end of the connector opening the possibility of a short circuit which will put an end to your very expensive POE switch. I paid the extra money for these because I thought they would do a good job, which they do not. A cheap £10 equivalent tool would do the same job and quite frankly, I could get the same results with an ordinary RJ45 crimper and a craft knife to trim off the ends.

Ürün çok kaliteli, k-beklentilerimin üzerinde

Facile da usare. I cavi ethernet RJ45 sono stati crimpati alla perfezione senza alcuna difficoltà.

FIJNE TANG WERKT SNEL , EN DOET WAT ZE GESCHREVEN HADDEN

Hace poco decidí cablear toda la casa y para hacer los cables cortos de la zona del switch use la crimpadora que compré hace más de 20 años junto con unos conectores que compré para Cat 6a, el caso es que no pude hacer ni un solo cable, el dinero de los conectores tirado. Así que compré esta crimpadora junto con los conectores de la marca que son pass through y no puedo estar más contento, no me ha fallado ni un solo cable y he gastado los dos paquetes de conectores. El cable que compré es el que tiene ahora Leroy Merlín (cable azul) de Cat 6a. Tengo velocidad de 1gb en cada habitación, la diferencia entre esta herramienta y la anterior es abismal, yo la recomiendo 100%. La única pega que le pongo es el precio, 40€. Pero después de ver el resultado, vale la pena pagarlos.

Qualité et en bonne état