Red 1.5ft Gold Plated Design 3.5mm Male to 2.5mm Male Car Auxiliary Audio Cable Cord Headphone Connect Cable for Apple, Android Smartphone, Tablet and MP3 Player

GR8 cable! I purchased for use with my JBL wired headphones. I needed a slightly longer cable, oem was just short of 4' [dont know why] probable b/c they are some crazy metric length. These are just long enough to be useful and not in the way. I like the contrast, the headphones are black with red [burgundy] trim. Cable is a rich red color. They are also quite a bit thicker though I cant say if the conductor is thicker of if it is just the shielding. Sounds pronominal, no distortion to sound. I'm sure someone will do multi-meter readings to officially 'spec out' but I just dont have time for that. Its a great cable and a super price, if you are looking stop here and buy these! :)

Works well ... I am using this on my Sennheiser HD 558 Headphones , in place of the custom cord and connector that they come with. It takes a small modification to the headphones to do this. The real Sennheiser HD 558 cord is removable at the 2.5 mm plug in the left headphone, but has two little nubs that stick out into the jack/connector hole, locking into a pair of slots in the 2.5 mm plug end of the cord. I used several varying size drill bits, increasing by 1/64" each time, from 12/64" to 15/64", hand held, to shave off those nubs. I put each bit in the Sennheiser jack hole and gave it a couple of twists, shaving a little more off the nubs each time. If you don't have such a drill bit set, then you'll have to figure out some other way to improvise. This mod can be done without any disassembly of the headphones, other than the simple unplugging of the original 2.5 mm plug from the left headphone, however I presume it voids your Sennheiser warranty. Someone on a Youtube video, and also someone in one of the Amazon reviews for this Sennheiser HD 558, suggested disassembling the left headphone and removing the plastic jack piece from the left headphone that forms the plug hole with nubs, but I do NOT recommend doing that, as it would weaken the mechanical support for the tiny circuit board that holds the electrical socket and internal wire connectors. The original Sennheiser cord still works, if I want to use it, but no longer is kept in by Sennheiser's proprietary twist-lock mechanism. You no longer have to give it a twist to remove it. But now replacement cords, such as this 1.5 ft cord, also work, if they have sufficiently thin plugs. The fit is snug, with either the original Sennheiser cord, or this 1.5 ft cord, so there is no problem with the plug falling out when not intended. The actual plug in this product, at the thick part thats dark silver color, is between 13/64" and 14/64" (or about 5.35 mm) in diameter, so I probably shaved off a 1/64" more from the nubs than I needed to ... which doesn't seem to matter that I can notice. The original Sennheiser cord in the HD 558 is 3 meters long, with a 2.5 mm jack on one end (with the two little slots for the interlocking nubs), and a big 1/4" jack on the other end. The thickest part of the Sennheiser's 2.5mm plug is 6.6 mm in diameter, so the 5.35 mm (at the thickest, silver, part) plug on this product fits easily into the Sennheiser HD 558's jack, once the Sennheiser's nubs are shaved down a bit. If you want a cable with a smaller 3.5 mm plug on the other end, as most portable equipment uses, stepping down the big 1/4" plug with the Sennheiser provided adapter to 3.5 mm is cumbersome, and a common source of complaints with the Sennheiser HD 558's.

I've bought several wires that change a 3.5 mm cable into a 2.5 mm cable for my takstar pro 82s. I thought hey, if I get one of these short wires.i can buy any male to male aux cable and use it and replace it. It didn't take me long to realize that dream would not come true. All the wires I bought either didn't fit my headphones or were defective. So I decided to just get a really good quality wire for them instead. This red wire from ABLE is 2.5 male to 3.5 male and it came very nicely packaged. No kinks, the Jacks were covered with small plastic shields, and best of all, it fits my headphones perfectly! I will be purchasing from ABLE again in the future.

Edit: Unfortunately, after owning and using this cable for 3 weeks it has completely ceased to function. Can't be from use as I have not unplugged it since first plugging it in. Hate to say it's just a faulty product but reading all the other reviews that seems to be the case. Bought this cable as it was longer than the one that arrived with my Bose QC35s, and as I now have a standing desk I needed something that could go the distance :P This cable had a perfect fit and very satisfying click into the back of my laptop and into my headphones. Others said they received a cable and only one side functioned I didn't have that problem everything works great and the cable seems very sturdily made; I'm considering ordering a duplicate just in case I ruin this one

I needed a cable to replace the OEM one sent with my Bose QC35s. Yes, yes, I know the QC35s have Bluetooth, but I have been experimenting with using my computer for phone calls, which also uses my Blue Yeti microphone. I was told that there was a lot of echoing when I used the external speakers and the microphone, so I tried the QC35s with the supplied audio cable to plug into the Yeti -- and it was fantastic with two complaints: the length of the audio cable left much to be desired and I was picking up interference from some outside source that came across as a humming noise that was noticeable to the other parties on the call. I ordered this cable in the 9 ft length and am very happy with that aspect of it. I was hoping that by using the additional length that I could re-wire the audio cable away from whatever was causing the interference but have not succeeded. I can get it to go away at times by repositioning the cable manually, but any shift in the cable will inevitably bring back the humming. My boss commented on the humming today as it was so loud. After several days of experimentation, I have ordered a shielded cable from another company. Overall the cable is very nice -- looks and design both seem to be good, and I believe it to be a higher quality than the one that came with the QC35s (not a surprise). I just can't make it work with my semi-unique setup. Hopefully the shielding of the other cable does the trick for me. I will be re-using this cable for another purpose (and happily so).

excellent product

Ich habe lange gesucht nach einen Kabel für meine TAKSTAR PRO 82. Das original Kabel ist leider viel zu lang, 2,2 meter. Dieses hier passt perfekt, es rastet schön ein. Da ich einen kleinen MP3 Player mit Clip benutze reichen 50 cm vollkommen aus, ebenso für meinen Verstärker, EarStudio 24bit. Habe mir sofort ein zweites bestellt, als Ersatz für meine 🎧 Von mir gibt es ☑️ gute Verarbeitung ☑️ toller Sound ☑️ sehr gutes Preis-Leistungsverhältnis

End connectors are solid, and the cord has nice supple rubbery sleeve. As advertised, it's a 3.5 mm/2.5 mm cord (I use it with my headphones and phone). I had never had a 2.5 mm connector before, and discovered it needs a little extra push to make the proper connection. Works great.

L'ho acquistato per rimpiazzare il cavo in dotazione alle mie cuffie Bose, decisamente troppo delicato. Oggetto con buon rapporto qualità prezzo, sarebbe perfetto se fosse rivestito in nylon.

Lovely cable 2.5 mm connector of the shaft is not long enough and does not have the locking mechanism so if you're using these for a Sennheiser headphones find another cable otherwise it is a lovely great quality cable

War als längeres Kabel für meine Bose Kopfhörer gedachr, sitzt stabil, Kabel fühlt sich robust an und lässt sich gut aufrollen/abrollen. Mehr brauche ich nicht 5/5