Bio Bidet SlimEdge Bidet Attachment for Toilet, Non Electric, Self Cleaning Dual Nozzles for Front and Rear Cold Water Wash, Adjustable Water Pressure, Ultra Thin Design, White

It works as advertised but this product was not made for UAE , the adapter/ fitting provided is not standard size and it was very hard to find the right counter fittings. It would help if those are provided in the package .

The attached accessories are not matching with the local accessories, so it is not easy to connect

Not fit with my wall WC

i have not installed this yet, but it looks amazing. this is my 4th or 5th bidet purchase all from amazon and i vouch for the sheer quality of parts in this one. most others were all cheap plastic but this one has brass fittings and a steel mesh hose. i see all features in it, i think it shall turn up great isA.

The product quality if good, but the problem is with the fittings, it came with US standard fittings and most UAE plumbing uses BSP. Cant find on typical hardware stores.for the right tee adapter to to able to make use.of the set either.

the T valve included is not designed for UAE standards, I think it is for USA standards

The T-valve adapter included in the bio bidet is bigger than the standard size and the whole bidet is useless and its not installable. I have tried other brand (IBAMA bidaet) and its fitting perfectly.

المنتج غير متوافق في قطع التي بيس و غير متوافق مع وصلات المرجوه داخل المنازل

This is what is needed but the water line fitting doesnt fit . I need the half inches size .whitch is unavailable . I need you to send the half inch water piece so i can use

**Update August 2023: Two and a half years later and I'm still very happy with this product. I still reccommend 👌** Original Review As of this review, I have been using this for three weeks. This is my first bidet purchase, and I installed it on an American Standard toilet with an elongated bowl, and slow close lid. My plumbing is standard for Canada. 1️⃣ Installation This quick and easy for me. I did not require any tools, and even though I didn't use the Teflon tape, I have not had any leaks. ( I will go back and apply the tape, I just wanted to test the setup). I did not need to use any of the bumpers provided for the toilet seat, either. Also, the instructions state that if the toilet isn't going to be used for a long period of time that the water source should turned off, I assume to prevent leaks if these parts fail; something to consider if you are not home for extended periods of time. 👉Ensuring that the rubber stoppers are in place, and in the correct position is key for ensuring there are no leaks! 2️⃣ Looks & Cleaning It is a different shade of white than my toilet. In my bathroom, the control handle sits closest to the wall and is generally protected from accidents (weight being applied, things dropped on it). Also, it does add more crevices for toilet gunk to hide; bathroom fuzzies and loose hairs that accumulate on toilets. Something to consider if you are planning on installing this is a high volume washroom. 👉If your bathroom has very tight spaces around the toilet, make sure you will have room for this. 👉If your exports look like chocolate bomb exploded in the bowl where the bidet will be sitting, consider how much extra cleaning this will involve and if your household members will actually keep this up. 3️⃣ The Spray I read a review about bidets before that mentioned "blowing your anus right off" and damn, if that isn't the truth! I find you have to wait a second after turning the dial for water pressure to build up enough to open the nozzle. For example, if the pressure was 1 to 5; turn it to 1 until water starts coming out, and then to your desired setting. In one of my attached photos, I've drawn red lines to indicate the max that I've gone to. I am in Canada, it is winter, and I've hooked into the cold water toilet line. A quick blast from the bidet isn't too bad, but if you dial up too much, or for too long, it is basically like waterboarding your orfices with ice water, and you may leave the washroom feeling violated. This bidet has a bum wash and a femine wash. The nozzles are in the same spot, but just seem to have a different spray setting. If we're comparing to garden hoses, think 'full' for bums, and 'jet' for the femine wash (Yikes). The angle is just slightly different, but I find myself trying to shuffle around to make sure my bits get a rinse which sometimes leads to water somehow spraying back onto the seat and lid. This could be because I usually perch closer to the end away from the tank. I can assume that if a male hit the 'feminine wash' by mistake, that you might hear crying coming from the washroom. Probably the most important bit of information in here is that this bidet has been surprisingly effective at rinsing away all exports. I just use a small wash cloth to dry off any whizzels, keeping g a lot of toilet paper from entering my septic system. As for deuces, I still use a bit of toilet paper, but I have yet to see any evidence of exports on the TP even if I had consumed an expired family size bagged salad kit the day before. 👉When you dialing the spray, WAIT a second for the water pressure to build enough to open the nozzle, THEN dial up the pressure! 👉The 'feminine wash' is um...aggressive. Consider making a simple instruction/warning sign for house guests in case they are brave enough to try it out. 👉This bidet is effective at rinsing away exports. I'm saving on TP, and giving my septic system a break. A pack of baby wash clothes from the dollar store work great for drying off the pieces. 4️⃣ Final Verdict I am happy I bought this, and would buy again. I don't see myself buying anything fancier than this in the future because this one is doing what I need it to; clean my pieces, and reduce TP consumption. As a female, I am glad I have the option for femine wash. Hope this review helps!

This one seems to use a weird non standard braided metal hose attachment size so I couldn't find longer hose which would fit (tried 3/8, 1/4 and 1/2, nothing worked).

Ça sert à rien d’en acheter si vous habitez en France. Retour assuré

La versión "SlimEdge" de este bidé tiene un precio razonable y parece estar fabricado con alta calidad y durabilidad. Se suministra con un adaptador en T de metal que se conecta directamente debajo de la conexión de manguera estándar de 7/8 de pulgada en la cisterna (ver tercera foto). Luego, la manguera original se vuelve a conectar a la parte inferior del adaptador en T. Luego, la manguera de 1/2 pulgada revestida de metal se conecta al lado del adaptador en T y al conector debajo de la perilla de control del bidé. El bidé es lo suficientemente delgado como para caber debajo de la conexión del asiento existente y tiene inserciones antideslizantes. Este inodoro American Standard en particular tiene obstrucciones cerca de los dos orificios para sujetar el asiento del inodoro, pero la rotación disponible en la ranura me permitió usar un ángulo diagonal (foto 2) para colocar el asiento a través del bidé con éxito. Las funciones de lavado delantero y trasero funcionan muy bien y permiten un buen control de la presión. El clic audible y táctil al llegar a la posición central de APAGADO también es una gran característica. El paquete también contiene espaciadores altos que puedes colocar debajo del asiento del inodoro para levantarlo si toca el borde de la taza del inodoro, aunque no tuve que instalarlos. En general, estoy muy satisfecho con este producto.