iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool

This filament is very nice. It has good adhesion and the colors are very vibrant. They definitely glow in the dark also.

Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first.

I've purchased 3 different gradient colors from iSANMANTE. I really like the way it looks and the way it prints. My prints always come out flawlessly. I see a lot of reviews saying this isn't good quality or that it clogs or cant be used with this or that. Well, I have never had a clog with any iSANMATE filament. I always use it in conjunction with a filament dryer, especially if I've had it open for a few months, and I never have any issues with it softening like one reviewer claimed. Someone else says to not use this if you have a Bambu Labs printer. I have a P1S and it works great, even when I just use the spool hanger on the back of the printer. If you are having issues with this filament, MAYBE you got a bad batch, but I think people need to check their printer and slicer settings. There are a lot of variables that can cause prints to fail. If you see some iSANMATE filament that looks really cool and pretty, then try it out! It's a filament that performs great and looks even better.

My first batch of this filament was good. Read my original review below. Not sure what happened, but this current batch is absolutely terrible. The first batch at least looked like it matched the colors. This batch, even though they were all different colors, all looked green. Not a problem, just annoying. The real problem is that it is so brittle! It snaps mid print, and even to the point it became extremely hard to unload as it kept snapping. Lastly it appears to glow less bright and for less time. Really not a good experience at all. I definitely won't be back for more. Sad. I'm new to 3D printing, but I have been a quick study and I'm starting to get some really cool stuff coming out of my Creality Ender 3 V2 Neo. I bought this glow in the dark medium to get some Halloween decorations ready for myself and my friends. The filament loaded into the printer fine and I never had a problem with it not sticking to the base or getting caught in the feeder. The haunted stump took 12 hours to print and it never had an issue. When it came time to unload it to put my normal filament in, it came out without a hitch all in all I'm very happy with the product. I just wish that they sold the colors individually as running such a big print ate through my green spool pretty quickly! ;). PS - It's been two week since I printed this and it still glows super bright in the dark.

I was excited to find some nice strong glow in the dark PETG! I had some little water resistant keychain containers I wanted to print and I thought a glow in the dark lid would "brighten" them up. The colors print beautifully on my Bambu P1S (I might have had to raise the temp 5C ) and printed smoothly. I noticed no brittleness, stringing, and used a 04mm hardened steel nozzle - so no clogging. Note, I keep my plates well scrubbed with Dawn and wipe with IPA before each use. I also store my filaments in cereal boxes with plenty of fresh desiccant and keep them below 20% moisture. The reason I took off a a star was the purple did not glow. I got the 4 color sample pack and maybe I got a bad batch but I did read one other person had trouble with the strength of the purple glow. Mine did not glow at all. Now it is STILL a beautiful color and I am thinking of ordering another roll (I am a purple addict). Forgot to take a picture of them. Next time I print all 4, I will add a photo to the review.

This filament is incredible and the glow is extremely bright! Was very shocked how bright these glowed!

The way this filament was spooled made printing hard! It was smushed at the corner at each row. Filament broke once during print from this. Filament itself is good but the spooling sucks and I won’t buy it again.

The color is vibrant, consistent, and looks amazing on finished prints—exactly what I was hoping for. It has a smooth, rich tone that really pops, whether I'm printing small models or larger pieces. Print quality has been excellent. The filament feeds perfectly with no jams, and layer adhesion is solid. I’ve had zero issues with warping or stringing, and the surface finish is clean and professional-looking every time. It’s clear this is a high-quality filament, and it’s become my go-to for any projects that need a bright, eye-catching pink. Highly recommend for anyone who wants great results and reliable performance!

The filament loaded and printed very smoothly. Stuck to the build plate very well. No clogs or failures. Luminosity requires UV light. Sunlight will work but it's harder to see because it's daytime. I also print with resin so have a number of UV lights around. 10 minutes in front of one and see picture attached.

Filamento fantastico, è resistente ed è davvero fluorescente!!! Escono dei lavori bellissimi

Ottimo

Excelente color, muy buenas impresiones.

Top impeccable