Gabriel HiJackers 49223 Adjustable Rear Air Shocks (Pair) fits Ford Ranger, Bronco II; Mazda B2300, B2500, B3000, B4000

I purchased these to put on my Chevy Silverado 3500 to help level my load when pulling my camper. Do these installed very easy and did the job very well. The shock itself is of good quality however if there was anyone fault with this, it would be the plastic Key filler connection where I would have preferred to see a brass filler valve T and brass connector instead of plastic. So far no leaks and the ride quality is good. They were a perfect fit and a good value solution for leveling my truck when hauling my camper.

I have a 2004 gmt800 single cab that was hitting the frame after a 4 inch drop kit. I didnt want to c notch the frame so I opted to go with these instead. Great purchase and the truck rides Much better now.

Bolt on Air Shocks, easy install and easy hook up for the air hoses.

Shocks are good quality. The air line kit was difficult to stop leaks. The bumper mount valve is plastic and the threads strip very easily making it difficult to keep it mounted.

Fit my old truck, stiff. And durable easy to install

I put these on my 2012 GMC Sierra 1500 to level the rear of my truck when I would use an auto hauler. When I bought these the window that says these will or will not fit your vehicle indicated they would. Why would I buy something that did not or would not fit? Now the window says they won't! The shocks fit my truck just fine and were easy to install. Installation took place at approximately 15,000 miles and they seemed to work really well over the last few of years. I only used the auto hauler approximately 5 times in the time the shocks were on the truck. The rest of the time the truck was used just as transportation with nothing in the bed. About a month ago, at about 45,000 miles I noticed a knocking noise...is that a good description?....coming from the rear of the truck when I would go over a bump. I have a 4 post lift in my garage and today I put the truck on the lift to check things out. I found that all of the bushings had become loose and the rubber had migrated out of position so that the ends of the shocks were no longer centered in the mounting brackets on the truck, and the edges of the ends were rubbing on the brackets! Plus the "Bell" on the top of one of the shocks had broken loose from the shaft and was free floating. I've used Gabriel shocks over the years and they used to be really good quality. Now they're just another piece of junk made in Mexico...or to be politically correct..Hecho en Mexico. So I would recommend to not waste your money on these. UPDATE: I ordered the ACDelco air shocks for the rear of my truck to replace the above shocks. When I received the Delco shocks and opened the box guess what....they are the identical shock as the the Gabriel that "won't fit my vehicle". The number stamped on the shock absorber is the same on both brands! And both are made in Mexico... I noticed on the Delco shocks that one of the bushings was already misshapen and was positioned wrong in the shock end. So I opted to return the ACDelco shocks before even installing them. Why replace junk with junk?

Work great on my Yukon XL

Fits great

Did not fit could not get right info from seller

Great quality shocks. Currently running a pair on the back on my 3 wheeler as air bags. They required modification but as a test set are handling everything pretty good 👍 One thing to watch for is if you are looking for eyelets on top and bottom 👆 The top is not an eyelet on the 13" model. It is made to bolt upwards into a mount. The 15 inch model has eyelets on top and bottom. Easy to fix but the picture can be deceiving.

Good seller, good product, good value. Thank you! I have one problem, they do slowly leak pressure over about 24 hours unfortunately I have been unable to track the source so far. Apart from that they work well and they are less harsh than the standard shocks that I replaced.

Excelente producto cumple con su buen funcionamiento.

Perfect fit. Works perfect. Very happy.