BV Bike Cleats Compatible with Look Delta and Peloton Bike - Adjustable 9 Degree Float System for Ultimate Stability and Power Transfer - Durable Red Metal Cleats for Road and Indoor Cycling Shoes

Got these to pair with Gavin cycling shoes for use with my flywheel home bike. Works great. Instructional video makes it pretty clear what to do with them, but you could also probably figure it out with a little common sense. One word of caution... make sure they are fully tightened to the shoe before you clip in... I wanted to test out the placement of the cleat for my foot positioning before I went ahead and fully tightened, so I clipped into the bike... and promptly got stuck. Took a while to clip out b/c the loose cleat just wanted to slide back and forth. So don't be an idiot like me -- tighten before you test! They are easy enough to screw/unscrew with a basic screwdriver.

They work as described.

Orders these for two pairs of Shimano shoes to go with my Peloton exercise bike. They installed easily with the 3 screws provided. The metal washers aren't a perfect fit inside of the clip slots but it gives you room to adjust and doesn't affect the operation. These clips do provide room for your shoe to move around just a little while "clipped in" which I like. If you want clips that lock in your shoes with no range of motion then these aren't for you. So far so good 3 months in and many rides.

Are you a Peloton rider, suffering from issues locking into and out of your bike pedals? It’s not the shoe, or the pedal that’s the problem, it’s the cleats. Will replacing your Peloton cleats with these fox the problem? Yes, but not perfectly without a slight change. The Peloton cleats are built too close to the shoe when installed properly. Peloton CS will tell you to loosen the pedal tension, but if you use other shoes/cleats you’ll notice they clip in just fine. Even after loosing the tension the Peloton cleats are still too close to the shoe, so you might be tempted to loosen the cleat. Unfortunately, doing so means that while you’ll be able clip in more easily, unclipping is now very hard without twisting your ankle in an uncomfortable position. And after unclipping, your cleat is possibly at a skewed angle now, meaning you’ll be pedaling pigeon toed, requiring you to readjust your cleats after every ride. No fun. If you attach these cleats to your Peloton shoes you’ll notice something new. A nice loud, audible click that you’ve locked successfully into your pedals. Much better than the dull thud that may or may not detach while in the middle of a ride with the original cleats. There’s still a problem with detaching the cleat from the pedal though. These cleats come with Phillips head screws and if you’re installing them with a normal screwdriver you probably aren’t going to install them as tight as they need to be installed. You’ll end up with the same problem as you had with loosening the Peloton cleats when detaching them from the pedals - skewed cleats, pigeon toed rides, constant readjusting. The solution: use these new cleats, but pair them with the Allen wrench screws from the Peloton cleats. You’ll get the leverage you need to keep them tight and prevent them from skewing sideways when detaching from the pedals, and you’ll get a well built cleat that easily clips into the pedal. Problem solved. Enjoy your [less frustrating] ride!

I love my Peloton bike, and I am not thrilled with the cost of accessories. No way am going to pay $100 for leggings. And when it comes to shoes, I have a wide foot, did not want to order expensive shoes online and then risk exchanging shoes several times until I found a pair that actually fit. So, went to REI, tried on several shoes until I found the right size. They were on sale I made sure the shoes were compatible with delta cleats. These arrived before the bike arrived, easy to attach to the shoes, and, I can click in and out easily

Super calidad

These were easy to put on cycling shoe to make them compatible with Peloton bike.

Used these for a second pair of shoe on Peloton The washers are smaller than Peloton The studs are a Phillips head not hex and so cannot be tightened too much. While looking dimensionally the same as the original these cleats provide too much rotational movement for my liking. They arrived on time and the price was good but I will seek out others which provides tighter more stable ride where I do not bang my shins. L

Son fácil de colocar y yo los pude usar sin tema

Pues eso, son compatibles con los antiguos pedales look delta. Probados, cumplen con su desempeño perfectamente.

cales qui correspondent à ma recherche habitué à ce système j'aimerais aussi en trouver de noires qui ont un angle de liberté plu serré pour les adeptes achat de confiance

LOOKデルタックリート対応はこれしかありません。実は残念なことに１年以上使用していたにもかかわらず、なぜか左側のクリートを止めるネジが２本走行中に脱落し、停止しようとした際にペダルカラシューズが外れず、転倒しました。ビスの締め込みが悪かったのでしょうが、１年以上何ともなかったので、びっくりしました。

Da meine Schuhgröße von Peloton nicht unterstützt wird habe ich auf ein Paar von Shimano zurückgegriffen und kann zusammen mit diesen Plates das Peloton Bike genauso wie mit den original Schuhen verwenden. Super Alternative!